• 한국도서관정보학회지
• /
• 제49권3호
• /
• pp.407-428
• /
• 2018

메타데이터 표준은 디지털 정보자원의 기록생애주기를 기술하는 데 있어 매우 중요한 요소이다. 메타데이터 표준은 정보자원에 행해지는 업무의 목적과 내용에 영향을 받고 있으나, 일반적으로 정보자원의 관점을 중심으로 정의 및 설계되었기 때문에 기록생애주기 전체를 보는 업무의 관점은 반영되어 있지 않다. 그래서 정보자원의 기록생애주기 전체를 커버하기 위해서는 정보자원의 업무 관점에서 메타데이터 속성을 적절하게 선택하고 조합하는 것이 필요하다. 이에 본 연구에서는 기록생애주기를 커버하고 정보자원에서 실행되는 업무와 요구조건에 따라 적절한 메타데이터 속성을 선택하여 조합할 수 있는 업무중심의 어플리케이션 프로파일을 작성하여 제안하였다.

• 한국농공학회논문집
• /
• 제49권6호
• /
• pp.93-101
• /
• 2007

In general, geotechnical properties have many uncertain aspects, thus probabilistic analysis have been used to consider these aspects. It is, however, quite difficult to select an appropriate target probability for a certain structure or construction process. In this study, minimum expected cost design method based on probabilistic analysis is suggested for design of vertical drains generally used to accelerate consolidation in soft clayey soils. A sensitivity analysis is performed to select the most important uncertain parameters for the design of vertical drains. Monte Carlo simulation is used in sensitivity analysis and probabilistic analysis. Total expected cost, defined as the sum of initial cost and expected additive cost, varies widely with variation of input parameters used in design of vertical drain systems. And probability of failure to get the minimum total expected cost varies under the different design conditions. A minimum value of total expected cost is suggested as a design value in this study. The proposed design concept is applicable to unit construction process because this approach is to consider the uncertainties using probabilistic analysis and uncertainties of geotechnical properties.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.375-378
• /
• 2007

The selection of the support system is an important design parameter in design and construction of the tunnel using the new Australian tunnel method. It is a common practice to select the support based on the rock mass grade, in which the rock mass is classified into five rock groups. The method is applicable if the characteristics of the rock mass are uniform in the direction of tunnel excavation. However, such case is seldom encountered in practice and not applicable when the properties vary along the longitudinal direction. This study performs comprehensive three dimensional finite difference analyses to investigate the ground deformation pattern for cases in which the rock mass properties change in the direction of the tunnel axis. The numerically calculated displacements at the tunnel crown show that the displacement is highly dependent on the stiffness contrast of the rock masses. The results strongly indicate the need to select the support type $0.5\sim1.0D$ before the rock mass boundary. The paper proposes a new guideline for selecting the support type based the results of the analyses.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.476-479
• /
• 2007

The selection of the support system is an important design parameter in design and construction of the tunnel using the new Australian tunnel method. It is a common practice to select the support based on the rock mass grade, in which the rock mass is classified into five rock groups. The method is applicable if the characteristics of the rock mass are uniform in the vertical direction. However, such case is seldom encountered in practice and not applicable when the properties vary along the vertical direction. This study performs comprehensive three dimensional finite difference analyses to investigate the ground deformation pattern for cases in which the rock mass properties change in the vertical direction of the tunnel axis. The numerically calculated displacements at the tunnel crown show that the displacement is highly dependent on the stiffness contrast of the rock masses. The results strongly indicate the need to select the support type $0.5{\sim}1.0D$(vertical direction) on the rock mass boundary. The paper proposes a new guideline for selecting the support type based the results of the analyses.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.197.1-197.1
• /
• 2014

VO2 has intensively investigated for several decades due to its interesting physical properties, including metal-insulator transition (MIT), thermochromic and thermoelectric properties, near the room temperature. And also gas and photo sensing properties of VO2 nanowires have attracted increasing research interest due to the high sensitivity and multi-sensing capability. We studied the light-induced resistance change of VO2 nanowires. In particular, we have investigated plasmonic enhancement of the photo-sensing properties of the VO2 nanowires. To select proper wavelength, we performed finite-difference time-domain simulations of electric field distribution in the VO2 nanowires attached with Ag nanoparticles. Localized surface plasmon resonance (LSPR) is expected at wavelength of 560 nm. The photo-sensitivity was carefully examined as a function of the sample temperature. In the presentation, we will discuss physical origins of the photo-induced resistance change in VO2.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.39-40
• /
• 2011

The purpose of this study is to select a conductive resistor as high energy efficiency through analysis of the heating properties by induction heating. The result of this study, the heating properties is capable of weaken cementitious joint in 10~30 seconds when using the conductive resistor with wire mesh or punching metal. Although the steel is higher temperature than SUS304, SUS304's heating properties are more uniform.

• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.648-660
• /
• 2009

In this research, an expert system has been developed to select optimum well-matched fusible interlinings with a face fabric. First, a database of face fabrics and fusible interlinings has been constructed. And knowledge acquisition has been performed from the previous studies about the properties of fusible interlinings and fused composites as well as fusing prsocess quality control. Then, a rule-based knowledge-base has been constructed through knowledge classification. Finally, we have constructed an inference engine with the knowledge-base. The expert system enables us to easily select optimum fusible interlinings for a face fabric considering high quality fused composites and fashion trend.

• The Journal of Asian Finance, Economics and Business
• /
• 제2권3호
• /
• pp.17-22
• /
• 2015

This paper examines the effect of impulsiveness of euro on Indian stock market. In order to examine the problem, we select rupee-euro exchange rates and S&P CNX NIFTY and BSE30 SENSEX to represent stock price. We select euro as it considered as second most widely used currency at the international level after dollar. The data are collected a daily basis over a period of 3-Apr-2007 to 30-Mar-2012. The statistical and time series properties of each and every variable have examined using the conventional unit root such as ADF and PP test. Adopting a generalized autoregressive conditional heteroskedasticity (GARCH) and exponential GARCH (EGARCH) model, the study suggests a negative relationship between exchange rate and stock prices in India. Even though India is a major trade partner of European Union, the study couldn't find any significant statistical effect of fluctuations in Euro-rupee exchange rates on stock prices. The study also reveals that shocks to exchange rate have symmetric effect on stock prices and exchange rate fluctuations have permanent effects on stock price volatility in India.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.205-211
• /
• 2008

Recently, selects method of waterproofing where is suitable with method and material physical properties, construction technique, Productive technique and specifications and maintenance techniques evaluation for the same evaluation method is coming to be presented. Respects the application which select system is substantial objectively reflects a weight to evaluation item the research for is necessary. This research the evaluation which in order is effective and the decision-making to be possible about technically countermeasures for a quality security from waterproofing materials, method selection processes, clearly responsible dividing of construction and maintenance techniques. A sets weight of evaluation item for right select system, it stratify the causes which affect in priority based on AHP.

• 천문학회보
• /
• 제43권1호
• /
• pp.58.1-58.1
• /
• 2018

The redshift range $1.4{\lesssim}z{\lesssim}2.5$ is often called the 'redshift desert' because of the difficulties in measuring spectroscopic redshifts due to the shifting of the major spectroscopic features into near-infrared wavelength (Steidel et al. 2004). One of the most efficient and fast way to select galaxies at this redshift range is the BzK technique designed by Daddi et al. (2004). Combining deep BVRz data from Deep Lens Survey with the wide-field (~4.08 deg2) K-band image, we select 1200 star-forming BzKs (sBzKs) and 120 passive BzKs (pBzKs) at K < 21.25. We discuss about the photometric redshifts, star formation rates, and stellar mass of the selected BzKs. Possible large scale structure at $1.4{\lesssim}z$ < 1.6 based on the spatial distribution of the BzKs is also introduced.