• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.349-352
• /
• 2007

Estimating the physical properties of the survey area and mapping the geotechnical basement play an important role in ocean engineering and construction field. In this study, we performed marine seismic reflection and refraction survey as an engineering application at shallow marine. We made use of the dual boomer - single channel streamer as a source-receiver in reflection seismic survey and air-gun source - the manufactured OBC(Ocean Bottom Cable)-type streamer in refraction survey. In the seismic reflection data, we could easily find the geological layers and basement. Moreover, seismic refraction data could present sediment thickness and velocity distribution.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.807-814
• /
• 2004

Land seismic reflection survey has been increasingly demanded in various civil engineering works because of its own ability to delineate layers, water table, to detect cavities or fracture zones, to estimate seismic velocities of each layer. However, our shallow subsurface structures are very complex. The relatively thin layer(mostly soil) to the wavelength directly followed by a basic rock with high impedance used to generate complicated surface waves, kind of channel waves with high amplitude that is dominate in entire seismograms and hence the useful reflection events will be almost hopelessly immersed in the undesired surface waves. Thus, it would seem that the use of traditional seismic survey could not be likely to provide in itself a satisfactory information about our exploration targets. This paper hence introduces an efficient measuring strategy illustrating a properly controlled arrangement of the vertical single force sources commonly used, yielding a very sharply elongated form of P-energy with a minimum of S radiation energy, what we call, P-beam source. Abundant experiments of physical modeling showed that in that way the surface waves could be enormously reduced and the reflection events would be additive and thus reinforced. Examples of field data are also illustrated. The contribution of P-beam source will be great in civil engineering area as well as in general geological exploration area.

• 지질공학
• /
• 제24권2호
• /
• pp.171-178
• /
• 2014

In seismic reflection data processing, the crossdip correction effectively focuses the stacking energy near the sharp bends of a crooked survey line. Additionally, approximate 3-D information on the reflector (e.g., true crossdip angle and lateral continuity) are locally investigated as a by-product of the crossdip correction procedure. Improvement of the signal-to-noise ratio and estimation of reflector crossdip attitude are tested, in terms of both common midpoint bin direction and processing-line type, using synthetic seismic reflection data. To effectively image the reflection energy near bends in seismic survey lines, straight-line binning is preferred to slalom-line binning.

• 지구물리와물리탐사
• /
• 제21권2호
• /
• pp.94-102
• /
• 2018

지진파 간섭법으로 구한 심부 가상 반사파 영상 특성 분석을 위하여, 벌림 범위, 무작위 잡음, 손실 자료, 정적 이상 등의 요인이 간섭파 단면에 미치는 영향을 분석하였다. 중심주파수 5 Hz의 지표 점샘에서 발생한 지진파 입자운동속도의 수직성분을 1 km 간격으로 100 m 깊이에 매설된 201개 수신기에서 유한차분법으로 계산하였다. 모든 합성지진파 트레이스의 쌍을 교차 상관하여 간섭파를 구하였고, 통상적인 반사파 처리방법으로 반사단면을 작성하였다. 분석결과, 반사파 간섭법의 광각반사에 따른 문제점들은 최대 벌림범위를 설정하여 최소화할 수 있었으며, 무작위 잡음, 손실 자료, 정적 이상 등은 수직 시간차 보정시 이완뮤트의 영향으로 가상 샘으로부터 퍼져나가는 형태의 처리잡음이 발생함이 밝혀졌다. 이들 처리잡음의 수준은 공통 중간점 겹쌓기 단면상에서 배경잡음의 크기 및 지속시간에 가장 민감하며, 손실된 자료의 수와 정적 이상의 증가에 따라서도 증가하는 특성을 보인다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.696-708
• /
• 2002

Seismic Reflection Methods(TSP, HSP) have been applied in the junction between 2nd Adit and Main Tunnel (Solan Tunnel) of Youngdiong Railroad(Mt. Dongbaek∼Dokye). In this paper, methods and case study will be introduced to predict discontinuties in the tunnel before excavation by the Seismic Reflection Methods(TSP, HSP)and secure construction stability of the tunnel in blasting and excavation.

• 지질공학
• /
• 제27권4호
• /
• pp.513-518
• /
• 2017

Groundroll is a coherent noise showing dispersive behavior in land seismic-reflection records and its rejection has been a stubborn problem in data processing because they severely degrade the continuities and resolution of reflection signals. Conventional processing schemes of attenuating noises are the kind of frequency filtering (i.e., bandpass and f-k) that uses the Fourier transform (FT) along the entire trace in the time domain. To suppress them in this study, 1D wavelet filtering (WT) that can control time-varying frequency properties is tested and performed in the land-based synthetic and field seismic data. The results are compared to the ones from conventional filtering techniques in terms of continuities and resolution of reflection events. This filtering technique enhanced the reflection events by effectively eliminating the dispersive groundroll and random noises with control of time-scale function on wavelet domain.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.208-212
• /
• 2008

Gas hydrate has been paid attention to study for because: 1) it can be considered as a new energy resources; 2) one of reasons causing the instability of sea floor slope and 3) a factor to the climate change. Bottom simulating reflector (BSR) defined as seismic boundary between the gas hydrate and free gas zone has been considered as the most common evidence in the seismic reflection data for the gas hydrate exploration. BSR has several characteristics such as parallel to the sea bottom, high amplitude, reducing interval velocity between above and below BSR and reversing phase to the sea bottom. Moreover, instantaneous attribute properties such as amplitude envelop, instantaneous frequency, phase and first derivative of amplitude of seismic data from the complex analysis could be used to analyze properties of BSR those would be added to the certain properties of BSR in order to effectively find out the existence of BSR of the gas hydrate stability zone. The output of conventional seismic data processing for gas hydrate data set in Ulleung basin in the East sea of Korea will be used for complex analyses to indicate better BSR in the seismic reflection data. This result of this analysis implies that the BSR of the analyzed seismic profile is clearly located at the two ways time (TWT) of around 3.1 seconds.

• 한국지반공학회논문집
• /
• 제22권4호
• /
• pp.41-49
• /
• 2006

이 논문에서는 S파 탄성파 반사법의 토목공학용 지반조사에의 적합성을 검토하기 위한 연구를 다룬다. 높이 약 20m 미만의 암반사면에 대한 S파 탄성파 반사법 탐사를 시행하였다. 탄성파 자료취득에는 표준적인 공심점 기법이 사용되었으며 24채널의 탄성파탐사기와 SH파의 진원으로 해머가 사용되었다. 수진기 전개는 양측전개가 채택되었고 진원점 및 수진점 간격은 각각 2m 이었다. 취득된 자료는 전산처리 과정을 거친 결과 신호대 잡음비가 향상되고 단면의 해상도가 향상되었으며 기반암의 속도정보가 얻어졌다. 최종 S파 반사단면은 1m 미만의 얕은 심도까지 반사파를 보여 주며 해상도는 1m 미만의 초고해상도를 보인다. 구조보정된 단면에서는 야외의 사면노두에서 확인된 층리면 및 단층에 잘 대비되는 뚜렷한 반사파 신호를 보여준다. 이와 같이 S파 탄성파 반사법을 이용하여 천부 지반 지질구조의 정밀한 반사 단면의 작성이 가능하므로 토목공학용 최적 시추공 위치의 결정에 이 방법이 유용하게 쓰일 수 있을 것이다.

• 산업기술연구
• /
• 제20권A호
• /
• pp.285-293
• /
• 2000

In 1970's, the analysis of shallow substructure was the interests of geological engineering and environmental problems. And seismic refraction method was applied to detect those structures. From 1980's, digital electric industry is rapidly developed and high resolution prospecting equipment is supplied. And seismic reflection method is applied to achieve various data gathering and data analysis. In this study, geophysical prospecting method is applied to calculate the basic data of limestone yield production. Seismic shallow reflection method is used to detect the depth of bedrock and electrical resistivity method is used to detect of limestone layer boundary.

• 산업기술연구
• /
• 제20권A호
• /
• pp.303-309
• /
• 2000

Seismic reflection method is applied to detect shallow location of limestone in Chechon area. The data using hammer source is compared with that of weight drop. Small size hammer and weight-drop are used as energy source and 100Hz geophones are used for data aquisition. Data processing is conducted utilizing the available processing technique of "Geobit", which is seismic data processing software developed by KIGAM. The result of above data processing, the velocity of topsoil layer is 1,250m/sec. The velocity of this area is higher than other area because loading trucks pass this area and make this layer compact. And in limestone area, hammer is proposed to energy source instead of weight drop because the energy propagates the layer very well.