• Computers and Concrete
• /
• 제31권3호
• /
• pp.185-195
• /
• 2023

Antalya is located south part of minor Asia, one of the biggest cities in Türkiye. As a result of population growth and vast migration to Antalya, many parts of the city that were not suitable for construction due to its geological conditions have become urban areas, and most of these urban areas are full of poorly engineered buildings. Poor engineering has been combined with unplanned urbanization, that causes utter vulnerability to disasters in Antalya. When an earthquake-prone city, Antalya faces with an earthquake risk, fear arises in society. To overcome this problem, it has become necessary to investigate the building stock, expressed in hundreds of thousands, in a fast and reliable way and then perform an urban transformation to create the perception of structural safety. However, the excessive building stock, labor, and economic problems made the implementation stage challenging and revealed the necessity of finding alternative solutions in the field. The present study presents a novel approach for assessment and model based on a rapid visual inspection method to transform areas under earthquake risk in Türkiye. The approach aimed to rank the interventions for decision-making mechanisms by making comparisons in the scale hierarchy. In the present study, to investigate the proposed approach, over 26,000 buildings were examined in Antalya, which is the fifth largest city in Türkiye that has a population of over 2.5 Million. In the results of the study, the risk classification was defined in the framework of building, block, street, neighborhood, and district scales.

• Earthquakes and Structures
• /
• 제5권4호
• /
• pp.439-459
• /
• 2013

Main objective of the present study is to determine the statistical properties and suitable probability distribution functions of spectral displacements from nonlinear static and nonlinear dynamic analysis within the frame work of Monte Carlo simulation for typical low rise and high rise RC framed buildings located in zone III and zone V and designed as per Indian seismic codes. Probabilistic analysis of spectral displacement is useful for strength assessment and loss estimation. To the author's knowledge, no study is reported in literature on comparison of spectral displacement including the uncertainties in capacity and demand in Indian context. In the present study, uncertainties in capacity of the building is modeled by choosing cross sectional dimensions of beams and columns, density and compressive strength of concrete, yield strength and elastic modulus of steel and, live load as random variables. Uncertainty in demand is modeled by choosing peak ground acceleration (PGA) as a random variable. Nonlinear static analysis (NSA) and nonlinear dynamic analysis (NDA) are carried out for typical low rise and high rise reinforced concrete framed buildings using IDARC 2D computer program with the random sample input parameters. Statistical properties are obtained for spectral displacements corresponding to performance point from NSA and maximum absolute roof displacement from NDA and suitable probability distribution functions viz., normal, Weibull, lognormal are examined for goodness-of-fit. From the hypothesis test for goodness-of-fit, lognormal function is found to be suitable to represent the statistical variation of spectral displacement obtained from NSA and NDA.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.101-104
• /
• 2008

최근 지진에 따른 피해가 전 세계적으로 많이 보도되고 있다. 이러한 지진으로 인한 인명과 재산의 피해를 예측하기 위해서는 사회기반시설물의 지진에 대한 손상정도를 판단 할 수 있는 지표가 요구되고 있다. 이 연구는 사회기반시설물들 중 기존 고속철도 교량을 대상으로 하였다. 일반적으로 교량의 지진에 의한 손상은 교각하부의 소성힌지 영역에 발생한다. 소성힌지의 비선형 요소 모델에 있어서 지금까지 대부분 Bilinear 모델을 사용하여 왔으나, 콘크리트 재료의 특성을 잘 반영할 수 있는 Takeda 모델에 의한 연구는 거의 없는 실정이다. 따라서 본 연구에서는 기존 고속철도교량을 대상으로 Takeda 모델에 의한 지진 취약도와 Bilinear에 의한 지진 취약도를 확률적으로 산정하고 비교 분석하여 콘크리트 재료의 특성을 잘 반영할 수 있는 재료 모델을 제시하고자 하였다. 해석결과 Takeda 모델에 의한 손상확률이 Bilinear 모델에 의한 손상확률보다 상대적으로 크게 나타났으며, Takeda 모델에서는 교축방향과 교축직각 방향에 대상 손상확률도 상이한 값을 나타냈다. 이는 교량의 교각이 대부분 콘크리트인 재료적 특성을 잘 반영할 수 있는 모델에 대한 제시를 할 수 있을 것으로 기대된다.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.95-102
• /
• 2020

Population concentration in urban areas has led traffic management a central issue. To mitigate traffic congestions, the government has planned to construct large-cross-section tunnels deep underground. This study focuses on estimating the damage caused to frame structures owing to tunnel excavation. When constructing a tunnel network deep underground, it is necessary to divide the main tunnel and connect the divergence tunnel to the ground surface. Ground settlement is caused by excavation of the adjacent divergence tunnel. Therefore, predicting ground settlement using diverse variables is necessary before performing damage estimation. We used the volume loss and cover-tunnel diameter ratio as the variables in this study. Applying the ground settlement values to the settlement induction device, we measured the extent of damage to frame structures due to displacement at specific points. The vertical and horizontal displacements that occur at these points were measured using preattached LVDT (Linear variable differential transformer), and the lateral strain and angular distortion were calculated using these displacements. The lateral strain and angular distortion are key parameters for structural damage estimation. A damage assessment chart comprises the "Negligible", "Very Slight Damage", "Slight Damage", "Moderate to Severe Damage", and "Severe to Very Severe Damage" categories was developed. This table was applied to steel frame and concrete frame structures for comparison.

• Advances in nano research
• /
• 제8권4호
• /
• pp.323-333
• /
• 2020

In recent years, there has been an upsurge for the usage of buckling restrained braces (BRB) rather than ordinary braces, as they have evidently performed better. If the overall brace buckling is ignored, BRBs are proven to have higher energy absorption capacity and flexibility. This article aims to deliberate an economically efficient yet adequate type of all-steel BRB, comprised of the main components as in traditional ones, such as : (1) a steel core that holds all axial forces and (2) a steel restrainer tube that hinders buckling to occurr in the core; there is a more practical detailing in the BRB system due to the elimination of a filling mortar. An investigation has been conducted for the proposed rectangular-tube core BRB and it is hysteric behavioral results have been compared to previous researches conducted on a structure containing a similar plate core profile that has the same cross-sectional area in its core. A loss of strength is known to occur in the BRB when the limiting condition of local buckling is not satisfied, thus causing instability. This typically occurs when the thickness of the restrainer tube's wall is smaller than the cross-sectional area of the core plate or its width. In this study, a parametric investigation for BRBs with different formations has been performed to verify the effect of the design parameters such as different core section profiles, restraining member width to thickness ratio and relative cross-sectional area of the core to restrainer, on buckling load evaluation. The proposed BRB investigation results have also been presented and compared to past BRB researches with a plate profile as the core section, and the advantages and disadvantages of this configuration have been discussed, and it is concluded that BRBs with tubular core section exhibit a better seismic performance than the ones with a plate core profile.