• 전산구조공학
• /
• 제8권3호
• /
• pp.113-122
• /
• 1995

이 논문의 목적은 현행법규(Uniform Buidling Code, NEHRP 설계규준 등)에 따라 설계된 구조들의 성능 및 안정성을 평가하는데 있다. 구조물의 내진성능은 신뢰성으로 표현할 수 있다. 구조물의 그의 수명동안 내진에 대한 신뢰성 해석을 하기 위해서는 주어진 구조물들의 많은 양의 동적반응 해석을 요구하는 것이 일반적이다 따라서 구조물의 신뢰성 해석을 위하여 구조물이 위치한 지역에 많은 양의 지진기록들이 요구된다. 이 논문에서는 인위적인 지진들(artificial earthquakes)을 부정착 임계 파정법(nonstationary randon process)을 이용해 만들었고 구조물은 Uniform Building Code와 AISC 허용응력 설계지침서(AISC allowables stress design manual)에 따라서 설계하였다. 이 논문에서는 주어진 지진하중에 대한 구조물의 반응은 구조물의 비선형 반응해석과 반응변위수정계수들을 이용한 간략화된 동위 구조물 해석(ENS)으로 얻었다. 이 논문에서는 구조물의 내진성능을 평가하였다. 또한 동위구조물(Equivalent Nonlinear System (ENS))을 이용한 해석과 구조물의 비선형 반응해석의 결과들을 비교하여 동위구조물을 이용한 방법의 정확성도 령가하였다.

• 한국지진공학회논문집
• /
• 제20권3호
• /
• pp.181-190
• /
• 2016

The objective of this study is to apply performance-based seismic design to high-rise apartment buildings in Korean considering collapse prevention level. The possible issues during its application were studied and the suggestions were made based on the findings from the performance-based seismic design of a building with typical residential multi-unit layout. The lateral-force-resisting system of the building is ordinary shear walls system with a code exception of height limit. In order to allow the exception, the serviceability and the stability of the ordinary shear wall structure need to be evaluated to confirm that it has the equivalent performance as the one designed under the Korean Building Code 2009. The structure was evaluated whether it satisfied its performance objectives to withstand Service Level and Maximum Considered Earthquake.

• 한국지반신소재학회논문집
• /
• 제21권3호
• /
• pp.41-48
• /
• 2022

수처리 지중구조물의 내진설계에서 내진설계 시보다 일반설계의 경우에 부재력 값이 더 크다고 알려져 있다. 그러나 이는 수처리 지중구조물의 종류 즉, 정수지 구조물, 침전지 구조물, 공동구 구조물에 따라서 다르다. 또한 최근 국내에서 발생한 지진의 규모를 보면 대형지진이 빈번하므로 설계지진력의 크기가 커질 때 수처리 지중구조물의 내진거동의 규명 및 대처방안이 필요하다. 본 연구에서는 수처리 지중구조물의 종류별로 하중계수 즉, 설계지진가속도를 일정 비율로 증가시키면서 지중구조물의 지진응답을 분석하고 변화를 나타내는 식을 제안하여 향후 설계기준 개정시에 참조하도록 하였다. 해석은 등가 정적해석법과 응답 변위해석법을 적용하고, 지하수 유무, 토피고에 따라서 다양하게 분석하였다. 본 연구에서 제안된 식은 향후 수처리 지중구조물의 설계기준 개정시에 유용할 것으로 판단된다.

• Earthquakes and Structures
• /
• 제9권2호
• /
• pp.391-413
• /
• 2015

Damage of torsionally coupled buildings situated on soil sites has been reported in literature, however no site-specific studies are available for torsionally coupled buildings having site characteristics as a parameter. Effect of torsion is being accounted in seismic codes by the provision of design eccentricity where the dynamic to static eccentricity ratio is a parameter. In this paper, a methodology to determine dynamic to static eccentricity ratio of torsionally coupled buildings has been demonstrated for Delhi region for two torsionally coupled buildings on three soil sites. The variations of average and standard deviations of frame shears for stiff and flexible edges are studied for four eccentricity ratios for the two buildings for the three sites. From the limited studies made, it is observed that the dynamic to static eccentricity ratios observed for site-specific earthquakes are different from Indian seismic code specified value, hence a proposal is made to include a comment in Indian seismic code. Methodology proposed in this paper can be adopted for any region, for the estimation of dynamic to static eccentricity ratio for site specific earthquake.

• 한국지진공학회논문집
• /
• 제28권2호
• /
• pp.93-101
• /
• 2024

Code-compliant seismic design should be essentially applied to realize the so-called emulative performance of precast concrete (PC) lateral force-resisting systems, and this study developed simple procedures to design precast industrial buildings with intermediate precast bearing wall systems considering both the effect of seismic and blast loads. Seismic design provisions specified in ACI 318 and ASCE 7 can be directly adopted, for which the so-called 1.5S_y condition is addressed in PC wall-to-wall and wall-to-base connections. Various coupling options were considered and addressed in the seismic design of wall-to-wall connections for the longitudinal and transverse design directions to secure optimized performance and better economic feasibility. On the other hand, two possible methods were adopted in blast analysis: 1) Equivalent static analysis (ESA) based on the simplified graphic method and 2) Incremental dynamic time-history analysis (IDTHA). The ESA is physically austere to use in practice for a typical industrial PC-bearing wall system. Still, it showed an overestimating trend in terms of the lateral deformation. The coupling action between precast wall segments appears to be inevitably required due to substantially large blast loads compared to seismic loads with increasing blast risk levels. Even with the coupled-precast shear walls, the design outcome obtained from the ESA method might not be entirely satisfactory to the drift criteria presented by the ASCE Blast Design Manual. This drawback can be overcome by addressing the IDTHA method, where all the design criteria were fully satisfied with precast shear walls' non-coupling and group-coupling strength, where each individual or grouped shear fence was designed to possess 1.5S_y for the seismic design.

• Earthquakes and Structures
• /
• 제2권1호
• /
• pp.65-88
• /
• 2011

A new method for the seismic design of plane steel moment resisting frames is developed. This method determines the design base shear of a plane steel frame through modal synthesis and spectrum analysis utilizing different values of the strength reduction (behavior) factor for the modes considered instead of a single common value of that factor for all these modes as it is the case with current seismic codes. The values of these modal strength reduction factors are derived with the aid of a) design equations that provide equivalent linear modal damping ratios for steel moment resisting frames as functions of period, allowable interstorey drift and damage levels and b) the damping reduction factor that modifies elastic acceleration spectra for high levels of damping. Thus, a new performance-based design method is established. The direct dependence of the modal strength reduction factor on desired interstorey drift and damage levels permits the control of deformations without their determination and secures that deformations will not exceed these levels. By means of certain seismic design examples presented herein, it is demonstrated that the use of different values for the strength reduction factor per mode instead of a single common value for all modes, leads to more accurate results in a more rational way than the code-based ones.

• Structural Engineering and Mechanics
• /
• 제78권2호
• /
• pp.219-230
• /
• 2021

International seismic codes stipulate that adjacent buildings should be separated by a specified minimum distance, otherwise the pounding effect should be considered in the design. Recent researches proposed an alternative method (Double Difference Combination Rule) to estimate seismic gap between structures, as this method considers the cross relation of adjacent buildings behavior during earthquakes. Four different criteria were used to calculate the minimum separation distance using this method and results are compared to the international codes for five separation cases. These cases used four case study buildings classified by different heights, lateral load resisting systems and fundamental periods of vibrations to assess the consistency in results for the alternative methods. Non-linear analysis was performed to calculate the inelastic displacements of the four buildings, and the results were used to evaluate the relation between elastic and inelastic displacements due to the ductility of structural elements resisting seismic loads. A verification analysis was conducted to guarantee that the separation distance calculated is sufficient to avoid pounding. Results shows that the use of two out of the four studied methods yields separation distances smaller than that calculated by the code specified equations without under-estimating the minimum separation distance required to avoid pounding.

• 한국지반공학회논문집
• /
• 제25권10호
• /
• pp.87-97
• /
• 2009

지진계수는 지진재해도 함께 지표면에서의 설계응답스펙트럼을 생성하는데 사용된다. 지진계수는 일반적으로 결정론적인 방법으로 도출되는 반면 지진재해도는 확률론적으로 계산되어 이들은 혼용될 수 없으나, 국내외 내진설계기준에서는 이들을 명확한 근거없이 혼용하고 있다. 이와 같은 근본적인 문제점을 해결하기 위해서 본 연구에서는 기존의 지진재해분석과 암반노두에서는 동일한 결과를 재현하되 지반응답해석 기능을 추가하여 토층에서의 부지증폭현상을 고려한 확률론적인 지진계수를 도출할 수 있는 신(新) 지진재해분석 기법을 적용하였다. 신(新) 지진재해분석 기법의 또다른 장점은 지반의 불확실성과 임의성을 합리적으로 고려할 수 있다는 점이다. 본 연구에서 계산된 확률론적 지진계수는 내진설계기준(II)과 국내에서 제안된 지진계수 세트들과 비교하여 차이점을 분석하였다. 비교 결과, 내진설계기준(II)과는 현격한 차이가 있는 반면, 또다른 지진계수와는 일부 지반분류에서만 차이가 나는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제10권2호
• /
• pp.261-291
• /
• 2016

This paper deals with the seismic assessment of a real RC frame building located in Italy, designed according to the current Italian seismic code. The first part of the paper deals with the calibration of the structural model of the investigated building. The results of an in-situ dynamic identification test are employed in a sensitivity and parametric study in order to find the best fit model in terms of frequencies and modal shapes. In the second part, the safety of the structure is evaluated by means of nonlinear static analyses, taking into account the results of the previous dynamic study. In order to investigate the influence of the infills on the seismic response of the structure, the nonlinear static analyses are performed both neglecting and taking into account the infill panels. The infill panels differently change the behavior of the structure in terms of strength and stiffness at different seismic intensity levels. The assessment study also verifies the absence of brittle failures in structural elements, which could be caused by either the local interaction with infills or the failure of the strength hierarchy.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.372-380
• /
• 2000

Seismic forces for member design of bridges may be determined by modifying elastic member forces induced by design earthquakes using appropriate response modification factors according to national design code of bridges. Modeling of soil/foundation system is one of the critical parameter in the process of elastic seismic analysis of bridge system which greatly affects on the analysis results. In this paper, a simplified modelling procedure of soil/foundation system which gives practically reasonable results is presented and its applicability has been validated through example bridge. Based on the results, it has been shown that the procedure is acceptable in modelling soil/foundation system for practical seismic analysis of bridges.