• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.234-237
• /
• 2008

It was reported that the semi-solid forming process has many advantages over the conventional forming process, such as a long die life, good mechanical properties and energy savings. It is very important, however, to control liquid segregation to gain mechanical property improvement of materials. During forming process, Rheology material has complex characteristics, thixotropic behavior. Also, difference of velocity between solid and liquid in the semi-solid state material makes a liquid segregation and specific stress variation. Therefore, it is difficult for a numerical simulation of the rheology Process to be Performed. General Plastic or fluid dynamic analysis is not suitable for the behavior of rheology material. The behavior and stress of solid particle in the rheology material during forging process is affected by viscosity, temperature and solid fraction. In this study, compression experiments of aluminum alloy were performed under each other tool shape. In addition, the dynamics behavior compare with Okano equation to Power law model which is viscosity equation.

• 한국주조공학회지
• /
• 제14권6호
• /
• pp.566-575
• /
• 1994

The effects of varying the pouring temperature and the die preheating temperature in producing centrifugally cast HP alloy modified with Nb was evaluated on the basis of the resultant macrostructure, microstructure and hardness of these castings. Increased die preheating temperatures and pouring temperatures resulted in an increase in the thickness of the columnar dendritic zone, the primary and secondary dendrite arm spacing and the thickness of the zone of porosity at the casting I.D.(inner diameter). Lower die preheating temperature and pouring temperatures result in increased grain fineness and an increased zone of equiaxed grains. A higher hardness was achieved toward the casting O.D.(outer diameter) compared to the casting I.D., attributable to alloy segregation toward the casting I.D. and segregation differences resulting from reduced solidification cooling rates toward the casting I.D. Also, a higher hardness was realized at the cold end of the casting attributed to a more uniform distribution of carbides.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.117-121
• /
• 1997

It is shown theoretically that uniform axial dopant concentration distribution can be made throughout the crystal by continuous Czochralski process. Numerical simulation are performed for the transient two-dimensional convection-diffusion model. A typical value of the growth and system parameters for Czochralski growth of p-type, 4 inches silicon crystal was used in the numerical calculations. Using this model with proper model parameter, the axial segregation in batchwise Czochralski growth can be described. It is studied by comparing with the experimental data. With this model parameter, the uniform axial concentration distribution of dopant is predicted in continuous Czochralski process.

• 한국IT서비스학회지
• /
• 제12권4호
• /
• pp.125-143
• /
• 2013

This paper intends to explore the social and cultural implications of convergence media, based on Goffman's situational approach. The situational segregation of regions makes us to re-interpret the current private and public spheres and helps us to reveal the principle and structure hidden in the new middle region. An environment of convergence media is nullifying the separation of private and public spheres, while letting a new middle region appear.

• 한국결정성장학회지
• /
• 제18권5호
• /
• pp.191-194
• /
• 2008

We will focus on the horizontal Bridgman growth system to analyze the transport phenomena numerically, because the simple furnace system and the confined growth environment allow for the precise understanding of the transport phenomena in solidification process. In conventional melt growth process, the dopant concentration tends to vary significantly along the crystal. In this work, we propose the modification of crucible geometry for improving the productivity of silicon single-crystal growth by controlling axial specific resistivity distribution. Numerical analysis has been performed to study the transport phenomena of dopant impurities in conventional and proposed Bridgman silicon growth using the finite element method and implicit Euler time integration. It has been demonstrated using mathematical models and by numerical analysis that proposed method is useful for obtaining crystals with superior uniformity along the growth direction at a lower cost than can be obtained by the conventional melt growth process.

• 대한기계학회논문집B
• /
• 제21권3호
• /
• pp.445-456
• /
• 1997

Continuous casting process is numerically analyzed using the continuum model in a non-orthogonal coordinate system. Flow damping in the mush is modeled by combining the viscosity dependence on liquid fraction in dilute mush and the permeability dependence on liquid fraction in concentrated mush. The effect of turbulence is indirectly considered by effective diffusivity determined elsewhere by experiment. The main objective is to investigate the effects of casting parameters such as casting speed and tundish superheat on the distribution of surface temperature, shell thickness, metallurgical length and centerline segregation. Some of the computed results are compared with available experiments, and reasonable agreements are obtained.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.47-52
• /
• 1993

Admixtures for concrete placed underwater have been developed to the stage that they are now widely used. The use of this type of product allows concrete to be placed underwater with far less risk than was previously possible. One of the problems facing users of underwater concreting admixtures is how does one test such products in order to access their performance initially while minimizing the expense of carrying out site trials. This paper will introduce three categories of laboratory test for underwater concrete listed next : fluidity test, non-segregation test, strength test. Trial underwater concretes were ordinary Portland cement. Strength and workability development and segregation resistance properties of the concrete under the coexistence of some kinds of superplasticizer were studied for this laboratory tests.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.301-306
• /
• 1998

Aggregate as the component of High Flowing Concrete has much influence on the properties of High Flowing Concrete according to the quality and condition because the aggregate occupy a lot of concrete volume. The shape and size of aggregate affect a lot spatial passibility and fillingability. The segregation is easy to occur when the rate of Fine aggregate is high so that Fluidity is much affected by aggregate factor. In this study, therefore, we try to understand the various fluidity according to the fine aggregate of standard grade rang, the size of Coarse aggregate and the rate of fine aggregate to confirm the manufacturing possibility of High Flowing Concrete by examination on the influence of fresh state of high flowing concrete such as flowability, reinforcement passibility, fillingability, segregation resistance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.258-261
• /
• 1998

Aggregate is cheaper than cement and confers considerable technical advantages on concrete, which has a higher volume stability and better durability than hydrated cement paste alone. and coarse aggregate is the largest particle size out of concrete and is much affect on the fruidity, compaction and non-segregation ability of high flowing concrete. As the compaction, fillingability and shrinkage of high flowing concrete, the volume ratio of coarse aggregate is prescribed by Japanese Architectural Standard Specificateon (JASS 5) : from 0.500 to 0.500㎥/㎥. It is the aim of this study to compare and analysis the fruidity, fillingability and non-segregation of high flosing concrete according to the volume ratio of coarse aggregate of concrete(G/Glim).

• 콘크리트학회지
• /
• 제10권2호
• /
• pp.147-154
• /
• 1998

고유동 콘크리트의 특성을 판정하기 위한 방법으로서 기존에 알려진 재료분리 판정 방법은 매우 복잡하고 번거로운 실험방법으로 실무 적용에 많은 어려움이 있다. 그런데, 고유동 콘크리트의 유동성 측정 방법에는 슬럼프 플로우를 주로 측정하고, 슬럼프는 변화가 작아서 배제되고 있는 실정이나, 재료분리된 양상을 살펴보면 슬럼프 플로우는 큰 반면, 슬럼프는 작은 양상을 보이고 있다. 따라서 본 연구에서는 고유동 콘크리트의 재료분리 저항성을 슬럼프와 슬럼프 플로우의 조합으로 간단히 평가할 수 있는지 그 가능여부를 검토하고자 하였다. 연구 결과 슬럼프 플로우에 대한 슬럼프의 비는 양호한 재료분리의 평가지표로 이용할 수 있는데, 이 값을 2.5 이하로 유지하면 실무에서의 고유동 콘크리트는 양호한 재료분리 저항성을 관리할 수 있을 것으로 사료된다.