• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.302-313
• /
• 2008

The purposes of this study are to investigate the concentration levels of fine particles, so called PM$_{2.5}$, to identify the affecting sources, and to estimate quantitatively the source contributions of PM$_{2.5}$. Ambient air sampling was seasonally carried out at two sites in Pohang(a residential and an industrial area) during the period of March to December 2003. PM$_{2.5}$ samples were collected by high volume air samplers with a PM$_{10}$ Inlet and an impactor for particle size segregation, and then determined by gravimetric method. The chemical species associated with PM$_{2.5}$ were analyzed by inductively coupled plasma spectrophotometery(ICP) and ion chromatography(IC). The results showed that the most significant season for PM$_{2.5}$ mass concentrations appeared to be spring, followed by winter, fall, and summer. The annual mean concentrations of PM$_{2.5}$ were 36.6 $\mu$g/m$^3$ in the industrial and 30.6 $\mu$g/m$^3$ in the residential area, respectively. The major components associated with PM$_{2.5}$ were the secondary aerosols such as nitrates and sulfates, which were respectively 4.2 and 8.6 $\mu$g/m$^3$ in the industrial area and 3.7 and 6.9 $\mu$g/m$^3$ in the residential area. The concentrations of chemical component in relation to natural emission sources such as Al, Ca, Mg, K were generally higher at both sampling sites than other sources. However, the concentrations of Fe, Mn, Cr in the industrial area were higher than those in the residential area. Based on the principal component analysis and stepwise multiple linear regression analysis for both areas, it was found that soil/road dust and secondary aerosols are the most significant factors affecting the variations of PM$_{2.5}$ in the ambient air of Pohang. The source apportionments of PM$_{2.5}$ were conducted by chemical mass balance(CMB) modeling. The contributions of PM$_{2.5}$ emission sources were estimated using the CMB8.0 receptor model, resulting that soil/road dust was the major contributor to PM$_{2.5}$, followed by secondary aerosols, vehicle emissions, marine aerosols, metallurgy industry. Finally, the application and its limitations of chemical mass balance modeling for PM$_{2.5}$ was discussed.

• Journal of Plant Biotechnology
• /
• v.33 no.4
• /
• pp.309-313
• /
• 2006

Discovery of single nucleotide polymorphisms (SNPs), including small insertions and deletions, is one of the hot topics in genetic research. The most common type of sequence variant consists of single base differences or small insertions and deletions at specific nucleotide positions. Significance of SNPs in rice is increasing for genetic research, positional cloning and molecular breeding. $F_2$ 170 lines and $F_3$ 194 lines derived from Sangjuchalbyeo/HR13721-53-3-1-3-3-2-2 Were used for Searching SNP markers related to bacterial blight resistance. Sangjuchalbyeo is susceptible to bacterial blight, but HR13721-53-3-1-3-3-2-2 has Xa1 gene resistant to bacterial blight. Individual lines were inoculated with $K_1$ race of bacterial blight and resistant or susceptible was evaluated after 3 weeks from inoculation. The genotypes of population were analysed by PCR-RFLP for SNP marker developing. The segregation of $F_2\;and\;F_3$ population showed almost 3:1, 1:1 ratio, respectively. Analysis of genotype using SNP marker is capable of confirming resistance for $K_1$ race and genotype through amplifying the gene using 16PFXal primer and digested the PCR product with Eco RV. There were close relation between resistance test for $K_1$ race and SNP marker genotype. Especially, DNA analysis using SNP marker is capable of judging homozygote/heterozygote in $F_2$ population compared with resistant test for Kl race. So, it seems to improve the selection efficiency in disease resistant breeding.

• Journal of Life Science
• /
• v.15 no.2 s.69
• /
• pp.253-260
• /
• 2005

Mitotic centromere-associated kinesin (MCAK), which is a member of the Kin I (internal motor domain) subfamily of kinesin-related proteins, is known to play a role in mitotic segregation of chromosome during M phase of the cell cycle. In the present study, we have produced a rat polyclonal antibody using human MCAK (HsMCAK) expressed in E. coli as the antigen. The antibody specifically recognized the HsMCAK protein (81 kDa), and could detect its nuclear localization in human Jurkat T cells and 293T cells by Western blot analysis. The specific stage of the cell cycle was obtained through blocking by either hydroxyl urea or nocodazole and subsequent releasing from each blocking for 2, 4, and 7 h. While the protein level of HsMCAK reached a maximum level in the S phase with slight decline in the $G_{2}-M$ phase, the electrophoretic mobility shift from $p81^{MCAK}\;to\;p84^{MCAK}$ began to be induced in the late S phase and reached a maximum level in the $G_{2}/M $ phase, and then it disappeared as the cells enter into the $G_{1}$ phase. Immunocytochemical analysis revealed that HsMCAK protein localized to centrosome and nucleus at the interphase, whereas it appeared to localize to the spindle pole, centromere of the condensed mitotic DNA, spindle fiber, or midbody, depending on the specific stage of the M phase. These results demonstrate that a rat polyclonal antibody raised against recombinant HsMCAK expressed in E. coli specifically detects human MCAK, and indicate that the electrophoretic mobility shift from $p81^{MCAK}\;to\;p84^{MCAK}$, which may be associated with its differential intracellular localization during the cell cycle, fluctuates with a maximum level of the shift at the $G_{2}-M$ phase.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.342-347
• /
• 2000

The objectives of this study were to investigate the genetic and phenotypic features of male sterile transformants by pollen-specific expression of diphtheria toxin gene and to find out inheritance patterns of transgene to the next generation. When backcrossed (BC) progenies were tested for expression of kanamycin resistance ($Km^R$), 9 lines out of 13 lines, except 4 lines ($BC_{1}5-13,\;BC_{1}5-23,\;BC_{1}5-28,\;BC_{1}5-32$), showed the ratio of $Km^R$ to kanamycin sensitive ($Km^S$), from 1:30 to all $Km^S$. As a result, they were much lower than Mendelian segregation of a dominant gene. To determine whether male sterility is a heritable and stable trait, 5 male sterile plants ($BC_{1}5-13,\;BC_{1}5-14,\;BC_{1}5-23,\;BC_{1}5-32,\;BC_{1}5-33$ lines) which had different transgene copy numbers were backcrossed as female parents with pollens from wild type. To confirm the existence of the DTx-A gene in the genome of the progenies, PCR was conducted using specific primers of the DTx-A coding region. A PCR band of 428 bp was obtained from each generation, which is the predicted size of the DTx-A gene fragment. Trangenes were inherited to the next $BC_4T_0$ progenies and showed male sterility, however, based on the copy numbers of DTx-A gene male sterile plants did not show predicted ratio. When male sterile plants were backcrossed with fertile plants, fruit capsule sizes and seed settings were relatively reduced from those of selfing wild type plants. The fruit sizes and seed settings were reduced in proportion to the increase in the copy number of DTx-A gene.

• Journal of Life Science
• /
• v.18 no.12
• /
• pp.1733-1738
• /
• 2008

SLC6A18, one of the neurotransmitters, was reported the possible relationship to hypertension, and it contained eight blocks of minisatellites. In this study, SLC6A18-MS5 sequence which showed the highest heterozygosity among seven minisatellites was analyzed using the Transfac software, the putative binding sites for the transcription factor Pax4 and HNF4 were discovered as a result. The HNF4 is involved in the diabetes pathway and suggested the relationship to hypertension. Thus, we investigated the putative functional significance of allelic variation in this minisatellites with respect to susceptibility for hypertension. To address this possibility, we analyzed genomic DNA from the blood of 301 hypertension-free controls and 184 cases with hypertension. A statistically significant association was not identified between the allelic distribution of SLC6A18-MS5 and occurrence of hypertension. We then examined the meiotic segregation of SLC6A18-MS5 and it was transmitted following Mendelian inheritance. Therefore, this locus could be useful markers for paternity mapping and DNA fingerprinting. Moreover, we undertook a comprehensive analysis of the genomic sequence to address the evolutionary events of these variable repeats. SLC6A18 minisatellites regions are only conserved in human and primates. This result suggestedthat intronic minisatellites analysis is powerful evolution marker for the non-coding regions in primates and can provide a great insight to the molecular evolution of repeated region in primates.

• Journal of the Korean Geographical Society
• /
• v.31 no.4
• /
• pp.685-698
• /
• 1996

Southern Louisiana has one of the largest Vitnamese refrgee neighborhoods after the mid-1970s. It is impressive that one of their adaptive strategies comes from their religious lives which are centered on either Catholicism or Buddhism. The Buddhism community, especially, exhibits an exotic symbolic system of value and attitude, and thus contributes to cultural diversity in the adopted country. The landscape of the Buddhist temple is a visible symbol to them that the host socirty accepts their maintenance of their own cultural identity and that they are also an integral part of American society. Their making-place and being-in-place procedures, although their culture is being transformed in the original shape, put an emphasis on interaction with the host xociety. These procedures have been facilitated by consolidating their identity as a minority group as well as by interacting with the host society. The on-going influx of foreign immigrant groups seems not to drive them to assimilate into the melting-pot society, but to contribute to contribute to the increase in the cultural diversity of the United States.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.170-183
• /
• 2019

Fiber scutching refers to the process of extracting fibers from plants by separating or extracting fibers from the raw materials. As the definition of the term implies, the "Fiber Scutching" is performed on plants with advanced bast fiber as the primary material processing technique performed on plant materials. Some of the most popular phosphorus plants are ramie, hemp, flax, and the paper mulberry, which have a long history of cultivation and a wide range of distribution, making them very universal as a material supporting human life and culture. This study was described in Oju-yeonmunjangjeon-sango but was designed to re-examine the method of breaking dried stalks, which is currently unused in Korea, to examine the feasibility and characteristics of the technology. As a result of sampling and experimenting with hemp bast using the method recorded in the literature, hemp fiber was actually produced. The criteria for removing the shell from the hemp stem were the degree of discoloration and drying, and only when the stalk was completely discolored to yellow could segregation of the stalk from the shell be performed. The amount of sunlight and temperature were conditions that accelerated drying. However, if exposed for a long time, it is confirmed that hemp bast will be in a suitable condition to process, regardless of the amount of sunlight and temperature. 'Breaking of dried stalks', which utilizes the physical power of 'threshing with a flail' is considered a core process of the fiber scutching technique in 'Yukjin' in Hamgyeong-do. The bark and the core of the hemp were separated by tapping, the bast was thinly split, and the shell was peeled off, making it suitable for collecting with thread. The method of collecting the fibers by applying physical power causes downing on the fibers, which is to be generally avoided in the manufacture of bast fabric woven hemp or ramie. However, Hamgyeong-do's fiber scutching method seems to have applied this principle to the method of making fragile fabrics by using it in reverse. This method is distinct from the steaming or boiling of the stalks' in Andong, Korea, and it is similar to the Western method of spinning fabrics.

• Journal of the Korean Magnetics Society
• /
• v.13 no.6
• /
• pp.237-242
• /
• 2003

$Ti_{1-x}$$^{57}$ F $e_{x}$ $O_2$(0.0$\leq$x$\leq$0.07) compounds were fabricated using the sol-gel method, and the crystal structure and magnetic properties were investigated as a function of doped $^{57}$ Fe concentration. X-ray diffraction patterns showed a pure anatase single phase, without any segregation of Fe into particulate. With varying $^{57}$ Fe concentration, we could observe unusual magnetic phenomena in these materials. Doping $^{57}$ Fe into the Ti $O_2$ nonmagnetic semiconductor formed magnetic properties, but the gradual increase of $^{57}$ Fe concentration decreased rapidly the ferromagnetic properties rather than enhanced the ferromagnetic properties. Obvious ferromagnetic behavior was shown for the samples with x$\leq$0.01, while paramagnetic behavior was shown for the sample with x$\geq$0.03. These phenomena could be verified using Mossbauer measurement. Separation of the ferromagnetic phase (sextet) and the paramagnetic phase (doublet) of the samples with different $^{57}$ Fe concentration was characterized. Samples with x$\leq$0.01 have sextet and doublet simultaneously, but samples with x$\geq$0.03 have only doublet at room temperature. This indicates that the sample x$\leq$0.01 have the ferromagnetic phase at room temperature. This result corresponded with the M-H loops referenced above and reveals an interesting feature that there is a critical limit of $^{57}$ Fe concentration (0.01$\leq$0.01 samples was fundamentally attributable to the paramagnetic phase as well as the ferromagnetic phase.e.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.1-10
• /
• 2014

In this study, two different types of dredged fill injection methods are introduced and filling experiments were conducted to analyze the impact of each technique to the distribution and deposition of dredged soil fill and how it influence the final tube shape. Two transparent plastic tubes were fabricated to observe the deposition behavior of the deposited fill material. Both tubes measured 4.0 meters in length (L) and has vinyl tube diameters (D) of 0.5m and 0.7m. T-type and I-type inlet system are also introduced in this paper. The influence of this inlet systems to the distribution and deposition behavior of dredged soil fill inside the vinyl tubes were observed during the experiment. After the sedimentation of the slurry mixture, the water on top of the soil sediments are removed and the slurry mixture was re-injected into the vinyl tube, this process was carried out repeatedly. The shape changes of the vinyl tube, e.g. the changes in both tube height and width, are constantly monitored after each slurry injection and water draining phases. Crater formation was observed in the case of I-Type inlet system and a non-uniform sediment distribution occurred. For the diffusion deposit of soil particles to long distance are minimal shape technique using the T-Type inlet system. Therefore the undrain filling height ratio ($H/D_0$) was found to be around 0.54 to 0.64 and the horizontal strain ratio ($W/D_0$) ranges from 1.45 to 1.54. The filling soil height is proportional to dredged-material filling phases, but, horizontal strain ratio is constant or inversely reduced so that the center of tube body is raised in the upward direction.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.2
• /
• pp.119-130
• /
• 1999

After preparing $Mg_2Ni_{1-x}{^{57}}Fe_x$(x=0.015, 0.03, 0.06, 0.12 and 0.24) alloys, they were studied by $M{\ddot{o}}ssbauer$ resonance. The $M{\ddot{o}}ssbauer$ spectra of x=0.015 and 0.03 alloys exhibit two doublets (doublet 1, 2). That of x=0.06 alloys shows two doublets (doublet 1,2) and one six-line, and those of x=0.12 and 0.24 alloys have only one six-line. The doublet 1 for x=0.015, 0.03 and 0.06 alloys is considered to result from a fraction of Fe in excess showing a superparamagnetic behavior. The doublet 2 is considered to result from the Fe substituted for Ni in the $Mg_2Ni$ phase. The values of isomer shift 0.24 ~ 0.28 mm/s suggest that the iron exist in the state $Fe^{+3}$. The result that the quadrapole splitting of the doublet 2 is not zero shows that the distribution of electrons around the iron is asymmetric. Their values for the doublet 2, 1.20 ~ 1.38 mm/s, approach the value of quadrapole for the oxidation number +3. The six-line showing the magnetic hyperfine interactions results from the iron which has not substituted the nickel in the $Mg_2Ni$ phase. The $M{\ddot{o}}ssbauer$ spectra of the hydrided alloys with x=0.015 and 0.03 show six-line. This suggests that the iron segregates with the hydriding reaction. The analysis results of the $M{\ddot{o}}ssbauer$ spectrum, the variation of magnetization with magnetic field, Auger electron spectroscopy and electron diffraction show the segregation of Ni and the formation of MgO. This is considered to result from the reaction of the $Mg_2Ni$ phase with the oxygen contained in the hydrogen as impurity.