• 한국콘텐츠학회논문지
• /
• 제15권8호
• /
• pp.544-555
• /
• 2015

본 연구는 농경유역 중소하천의 주요 지점에서 실측된 현장자료를 사용하여 유량과 총유사량 관계곡선과 이들 간의 관계식을 유도한다. 실측치 총유사량 자료는 수심평균농도와 하상에서 각각의 부유사와 소류사 채취기(DH-48, D-74 및 BLH-84, BL-84)에 의해 채집된 시료를 건조 또는 여과법, 체분석에 의한 입도분포곡선을 통해 얻은 부유사량에 소류사량을 합하여 얻었다. 이들 현장자료는 농경유역 논산수계 내 4개 대상하천의 국가-지방하천 수로구간 7개 측점에서 2012년 8월부터 2014년 9월까지 측정되었다. 그 결과, 유량과 총유사량에 대한 관계곡선과 관계식은 현장측정 자료군의 분포특성을 분석함으로써 멱함수형으로 유도하였으며, 이들 관계식은 수공 유사공학의 이론적 연구뿐만 아니라 실무적 응용에 있어 세굴, 퇴적 및 이송을 해석하는데 유용한 도구로 사용될 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4491-4498
• /
• 2022

The thermal stress between W plasma-facing material (PFM) and Cu heat sink in fusion reactors can be significantly reduced by using a W-Cu functionally graded material (W-Cu FGM) interlayer. However, there is still considerable stress at the joining interface between W and W-Cu FGM in the W/W-Cu FGM/Cu portions. In this work, we fabricate W skeletons with continuous gradients in porosity by a modified sedimentation method. Sintering densification behavior and pore characteristics of the sedimented W skeletons at different sintering temperatures were investigated. After Cu infiltration, the final W-Cu FGM was obtained. The results indicate that the pore size and porosity in the W skeleton decrease gradually with the increase of sintering temperature, but the increase of skeleton sintering temperature does not reduce the gradient range of composition distribution of the final prepared W-Cu FGM. And W-Cu FGM with composition distribution from pure W to W-20.5wt.% Cu layer across the section was successfully obtained. The thickness of the pure W layer is about one-fifth of the whole sample thickness. In addition, the prepared W-Cu FGM has a relative density of 94.5 % and thermal conductivity of 185 W/(m·K). The W-Cu FGM prepared in this work may provide a good solution to alleviate the thermal stress between W PFM and Cu heat sink in the fusion reactors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2171-2176
• /
• 2007

The 3-omega (3-${\omega}$) method is utilized to measure the thermal conductivity of nanofluids. A metal line heater on a silicon nitride membrane bridge structure is microfabricated by a bulk silicon etching method. Localized measurement of the thermal conductivity within the nanofluids droplet is possible by the fabricated 3-${\omega}$ sensor. Time varying AC temperature amplitudes and thermal conductivities are measured to check the stability of the nanofluids containing multi-wall carbon nanotubes (MWCNTs). Stabilities of MWCNT nanofluids prepared with different chemical treatments are compared. Acid treated MWCNT showed best dispersion stability in water while MWCNTs dispersed in water with surfactants such as Gum Arabic and Sodium dodecyl benzene sulfate showed clear sign of gravity dependence.

• 동력기계공학회지
• /
• 제9권1호
• /
• pp.36-41
• /
• 2005

This study investigated the performance of a vortex hydrocyclone for solid removal in a recirculating aquaculture system. In a fish-breeding industry, effluent water is mainly disposed by gravity sedimentation. Thus, a large settling tank and a lot of water are needed to purify effluent water. However, this typical method does not show consistent efficiency. In case of low efficiency, discharged water contains a lot of feeding sediments. This causes environmental problems. Instead of this typical method a hydrocylone is tested to discharge water which contains a lot of feeding sediments. In this paper, a hydrocyclone with low velocity and pressure drop in a recirculating aquaculture system is investigated.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.75-86
• /
• 2002

본 연구에서는 준설토 전체건조시료중의 모래함유율을 모래혼합비율, S-C라고 정의하고 단계별 투기방법에 의한 실내침강압밀시험을 통하여 S-C별 침강 및 압밀, 퇴적현상을 제시하였다. 또한 혼합토에서 서로 다른 거동을 보이는 점토분과 조립분을 분리시켜 S-C에 따른 점토분만의 간극비와 침하량을 계산하였다. 투기완료 후 S-C별 실내시험결과를 기존의 경험적인 해석방법과 쌍곡선법을 응용한 새로운 방법으로 산정한 투기완료 후의 계면고, 체적비 변화와 비교, 분석하였다. 시험결과 자중압밀완료 후 S-C가 증가할수록 액성한계가 혼합토의 컨시스턴시에 대한 영향을 많이 끼치며, 그 한계는 대략 65%로 판단된다. S-C에 따라 점토성분만의 간극비를 계산한 결과, 점토간극비는 S-C가 0%와 50%의 경우 투기완료 후 시간이 아무리 경과되더라도 각각 2와4이하가 될 수 없음을 보였다. 침하와 시간의 관계에서 재초기화 곡선의 시작점은 矢野弘一郞(1985)가 제시한 팀강곡선의 변곡점에 해당하였고 직선과 상관계수가 거의 1인 재초기화 곡선의 거동을 보였다. 재초기화 곡선의 기울기와 절편은 30cm이후 전체높이 별 지수함수의 형태로 파악하는게 타당하다고 판단되며, 시료높이별로 계면고변화를 고려하고 투기완료 후 기울기가 시험결과와 잘 일치하는 쌍곡선 법을 응용한 예측방법이 기존의 경험적인 방법보다 모래의 영향을 고려한 지역에서 준설 매립 할 경우 더 합리적이라고 판단된다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 Energy Saving Membrane Separtion Systems 에너지 절약형 막분리 시스템
• /
• pp.39-39
• /
• 1999

Membrane separation technology has become a more attractive technology on waste water treatment and water recycle in recent years. On this application, membrane does not take main part of treatment, such as decomposition or handling of organic matter in the waste water, but it is very important supporting method in the total system. Activated sludge is most popular method as main part. In the system , membrane works as a separator to obtain clear water after biological treatment, by which the permeate could be released, recycled or applied to further additional treatment, instead of conventional sedimentation, coagulation and sand filtration. We would like to introduce our system cases for waste water treatment and water recycle, in which membrane separation technology works. In most of cases, membranes are applied to solid- liquid separation of activated sludge. Our experiences will be introduced as following items.

• 한국임상수의학회지
• /
• 제11권2호
• /
• pp.579-583
• /
• 1994

In the present studies, samples of blood were taken from 24 Holstein cattle over 2 years old. By using the angled tube method the normal ESR values were determined in cattle under various diseases. The results obtained were summarized as follows ; The standardized ESR/hr using 45$^{\circ}$ angled capillary tubes were 19.0% in case of necrotic mastitis, 23.0% in nephritis, 12.2% in anemia and 4.2% in diarrhea. And the ESR was increased from some necrotic disease, decreased from diarrhea conditions and general the normal ESRs were shown in the sub-clinical or recovery stage of infections or disorders.

• 한국동물위생학회지
• /
• 제13권1호
• /
• pp.103-109
• /
• 1990

To investigate the swine parasitic infection rate, we performed centrifugal floatation method and sedimentation method between Jan. 1989. and Dec. 1989. This results are shown as follows. 1. The numbers of infection were 593 pigs in 1080, shown 54.9% of infection rate. 2. In this survey, eight species of swine parasite were detected. The percentage of Balantidium coli was 44.5, revealed hightest level. There were 14.5% in Ascaris suum and 11.8% in Oesophagostomum SP respectively. 3. In this survey, there was high rate(86.0%) of parasitic infection in the pig raised at sawdust fermantation house. This results suggest that pig maybe liable to infect parasite.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.456-462
• /
• 2009

In comparison to processed wheat flour products, there is no established method for determining the water absorption of rye flour. The aim of this study was to work out a method using the Planetary mixer P 600 for the determination of water absorption (WA) and the rheological properties in rye dough made from rye flours of 4 different types (I-IV). In the correlation analysis showed that WA had positive correlation with ash, beginning of gelatinization, $125-160{\mu}m$ particles, sedimentation values at 20 and 25 min, bread yield, pH, and total titratable acidity, but had negative correlation with initial viscosity, gelatinization maximum, viscosities on swelling at 25, 28, and $31^{\circ}C$. The WA determined by the Planetary mixer P 600 agreed well with the experimental baking tests.

• 한국세라믹학회지
• /
• 제28권8호
• /
• pp.577-584
• /
• 1991

Among various forming techniques for ceramics, we have studied the slip casting method for the binary system of SiC and carbon. The stability of the slip of silicon carbide and carbon were investigated by measurements of zeta potential, viscosity, sedimentation height, and also studied as functions of PH and amounts of dispersants. A preform of SiC and C was prepared by slip casting and heat treatment at 400∼600$^{\circ}C$ under N2 gas. The preform was reacted with Si metal at 1550$^{\circ}C$, 10-1 mmHg to give rise a reaction bonded SiC with a density of 3.0g/㎤ and a bending strength of 580 MPa.