• 한국물환경학회지
• /
• 제22권5호
• /
• pp.865-870
• /
• 2006

The behavior and influence of EPS on membrane fouling by changing of hydraulic retention time was investigated, using lab. scale submerged membrane bio-reactor, which was operated with gravitational filtration and fed supernatant of primary sedimentation in waste water treatment plant as influent. The membrane was adopted micro-filter of polyethylene hollow fiber. EPS was analysed as polysaccharides and protein especially, into soluble and bound EPS separately. The concentration of soluble EPS was increased at short HRT, then membrane fouling was rapidly progressed and flux was depressed. The most of EPS clogged membrane pore were polysaccharides, while protein was important parameter affected on membrane fouling because of it's more accumulating in the more term operating.

• Geomechanics and Engineering
• /
• 제9권2호
• /
• pp.243-259
• /
• 2015

Comparative study has been performed to investigate the behavior of dredged fills on rigid (Model 1) and flexible (Model 2) containers. The study was focused on the sedimentation of soil fills and the development of total stresses. Model 1 is made of an acrylic cylinder and Model two is a scale-size geotextile tube. Results indicate that for rigid containers, significant decrease of the sediment height is apparent during the dewatering process. On the other hand, because the geotextile is permeable, the water is gradually dissipated during the filling process on flexible containers. Hence, significant loss in the tube height is not apparent during the duration of the test. Pressure spikes are apparent on rigid containers during the filling process which can be attributed to the confining effect due to hydrostatic pressure. For the flexible containers, the pressure readings gradually increases with time during the filling process and normalize at the end on the filling stage. No pressure spikes were apparent due to the gradual dissipation of pore water pressure.

• Journal of Korean Neurosurgical Society
• /
• 제38권3호
• /
• pp.206-210
• /
• 2005

Objective : Our aim is to evaluate the early changes of biologic markers such as white blood cell[WBC] count, erythrocyte sedimentation rate[ESR] and C-reactive protein[CRP] in early diagnosis of postoperative infection and to differentiate infection from inflammatory reaction in lumbar spine surgery. Methods : We reviewed 330patients who had undergone spinal operations between May 1999 and October 2001. For this study, the patients were classified into two groups, which include a group that underwent spinal decompressive surgery without instrumentation[SD], and the other group that underwent fusion surgery with spinal instrumentation[SI]. And each group was also subdivided into two groups respectively, one with infection and the other without infection. We retrospectively analyzed the WBC count, ESR and CRP preoperatively and postoperatively, according to their operation type and postoperative infection history. Results : Inflammatory indices were physiologically affected by instrumentation itself. But ESR and CRP elevations were more prolonged and sustained under infection. In SD patients without infection, ESR and CRP were stabilized 5 days after surgery. In SI patients without infection, CRP was stabilized about 7days after surgery, but ESR showed sustained and variously elevated. In both SD and SI groups, the stabilization of CRP was the most reliable behavior of surgery without infection. Conclusion : C-reactive protein is most sensitive parameter for postoperative spine infection. The knowledge of the inflammatory indices and their relatively uniform patterns with or without infection offers surgeons the ability to infer the state of surgical wound.

• 한국항해항만학회지
• /
• 제32권6호
• /
• pp.489-497
• /
• 2008

정부는 지역제조산업 육성을 목적으로 기존 부지를 개선 확장하거나 해안지역 매립을 통하여 신설하는 방향으로 산업단지조성을 위한 정책을 펼치고 있다. 따라서, 물리적 환경적인 특성의 관점에서 해안지역매립으로 인한 영향의 분석은 반드시 필요하다. 본 논문도 임해지역 국가산업단지 조성에 따른 영향을 인근 해역의 해양물리적 특성, 퇴적 및 확산 체계 변화, 해양환경 변화 등의 현상을 현장관측조사 및 수치시뮬레이션을 통하여 분석하고자 한다. 적용대상역은 울산광역시의 온산국가산업단지 인근의 해안선경계역이다. 검증을 위해 조석, 조류 및 퇴적에 관한 기존의 관측자료를 확보하였으며 일부 특정지점에서는 현장관측도 수행하였다. 검증한 모델로 실제대상해역에 적용하고 장래변화를 분석하였다.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4491-4498
• /
• 2022

The thermal stress between W plasma-facing material (PFM) and Cu heat sink in fusion reactors can be significantly reduced by using a W-Cu functionally graded material (W-Cu FGM) interlayer. However, there is still considerable stress at the joining interface between W and W-Cu FGM in the W/W-Cu FGM/Cu portions. In this work, we fabricate W skeletons with continuous gradients in porosity by a modified sedimentation method. Sintering densification behavior and pore characteristics of the sedimented W skeletons at different sintering temperatures were investigated. After Cu infiltration, the final W-Cu FGM was obtained. The results indicate that the pore size and porosity in the W skeleton decrease gradually with the increase of sintering temperature, but the increase of skeleton sintering temperature does not reduce the gradient range of composition distribution of the final prepared W-Cu FGM. And W-Cu FGM with composition distribution from pure W to W-20.5wt.% Cu layer across the section was successfully obtained. The thickness of the pure W layer is about one-fifth of the whole sample thickness. In addition, the prepared W-Cu FGM has a relative density of 94.5 % and thermal conductivity of 185 W/(m·K). The W-Cu FGM prepared in this work may provide a good solution to alleviate the thermal stress between W PFM and Cu heat sink in the fusion reactors.

• 한국재료학회지
• /
• 제34권1호
• /
• pp.27-33
• /
• 2024

Al₂O₃ has excellent sintering properties and is important in semiconductor manufacturing processes that require high-temperature resistance and chemical inertness in a plasma environment. In this study, a comprehensive analysis of the chemical characteristics, physical properties, crystal structure, and dispersion stability of three commercially available Al₂O₃ powders was conducted. The aim was to provide a technological foundation for selecting and utilizing appropriate Al₂O₃ powders in practical applications. All powders exhibited α-Al₂O₃ as the main phase, with the presence of beta-phase Na₂O-11Al₂O₃ as the secondary phase. The highest Na⁺ ion leaching was observed in the aqueous slurry state due to the presence of the secondary phase. Although the average particle size difference among the three powders was not significant, distinct differences in particle size distribution were observed. ALG-1SH showed a broad particle size distribution, P162 exhibited a bimodal distribution, and AES-11 displayed a uniform unimodal distribution. High-concentration Al₂O₃ slurries showed differences in viscosity due to ion release when no dispersant was added, affecting the electrical double-layer thickness. Polycarboxylate was found to effectively enhance the dispersion stability of all three powders. In the dispersion stability analysis, ALG-1SH exhibited the slowest sedimentation tendency, as evidenced by the low TSI value, while P162 showed faster precipitation, influenced by the particle size distribution.

• 한국철도학회논문집
• /
• 제8권4호
• /
• pp.372-378
• /
• 2005

화강풍화토의 강도와 변형특성을 조사하기 위하여 불포화배수 삼축압축시험을 실시하였다. 주응력방향과 다짐방향을 0, 45, 90도의 세가지 방향성을 갖도록 하였다. 등방압축시 발생하는 압축변형률은 다짐각도에 따라 크게 영향을 받는다. 이차압축시의 변형거동에 관한 시간의존성은 다짐각도와 관계가 없는 것으로 판단되었다. 다짐각도가 압축강도와 변형에 미치는 영향은 특히 낮은 구속압력시에 크다. 다짐각도가 다르다 하더라도 다일러턴시 비율은 다일러턴시로 인한 강도증가와 상관하여 변화한다. 따라서 다짐풍화토는 초기 비등방성 조직을 갖고 있는 모래와 같이 비등방성 역학적 성질을 갖는다고 할 수 있다.

• Korean Journal of Hydrosciences
• /
• 제10권
• /
• pp.1-15
• /
• 1999

A relaxed similarity theory which can be applied to river madels with movable beds is established by modifying existing theory by Einstein and Chien(1954). Experimental data collected from river models with movable beds were used to evaluate the applicability of the proposed theory. Effects of similarity of flow. $\Delta$F$\Delta$M, and similarity of sediment movement, $\Delta$$F_s$, were examined by analyzing the behavior of total river-bed change. The results show that the smaller $\Delta$F$\Delta$M or $\Delta$$F_s$ is, respectively, the larger total sedimentation is. The modified similarity theory established in this study would be useful and practical whenever it is impossible or very difficult to satisfy strict theoretical requirments concerning the river model experiments with movable beds.

• 대한토목학회논문집
• /
• 제41권6호
• /
• pp.675-686
• /
• 2021

본 연구는 폐석적치장 하부 경사지에서 발생하고 있는 지반변위를 조사하고 산사태에 의한 재해 가능성에 대해 검토하였다. 이를 위하여 먼저 무인 항공기 사진측량을 실시하여 지반변위의 크기와 범위를 조사하였다. 2019년 4월부터 2020년 7월까지 5회의 무인 항공기 측량의 평균 오차율은 0.011 - 0.034 m이었으며, 토층의 이동으로 2.97 m의 표고 변화가 발생하였다. 급경사지 중 일부 구역만 표고 변화를 보이며 이것은 상부의 폐석 하중의 영향보다는 강우 시 발생한 지하수에 의한 땅밀림에 의한 것으로 판단된다. LS-RAPID 시뮬레이션을 위한 민감도 분석을 실시하였으며, 지형자료로서 DEM과 DSM을 각각 10 m, 5 m, 4 m 격자로 적용하여 시뮬레이션 결과를 비교, 분석하였다. 공간 해상도가 높은 자료를 이용하면 DEM에서는 산사태 물질의 퇴적 범위가 지나치게 확대되는 경향을 보인 반면, 지형을 세밀하게 반영한 DSM을 적용한 결과에서는 공간 해상도 변하여도 확산범위는 크게 영향을 받지 않으며 하천형상에 따른 퇴적 거동을 정밀하게 표현할 수 있었다. 결과적으로 DEM보다 DSM을 적용하는 것이 퇴적범위가 크게 확대되지 않으며, 현장상황을 잘 반영한 결과가 얻어지는 것으로 평가되었다.

• 해양환경안전학회지
• /
• 제24권1호
• /
• pp.119-125
• /
• 2018

입자기반 전산유체역학 기법은 유체역학에서의 라그란지안 접근법에 기반을 두고 있다. 입자기반 방식은 입자 각각이 물리량을 가지고 움직이며 이러한 입자의 움직임을 추적하는 방식으로 유체의 거동을 구현할 수 있다. 이러한 방식은 격렬한 움직임에 의한 자유표면 혹은 경계면의 운동 재현에 우수성이 있으나 연속체역학을 위반할 수 있다는 문제점 역시 포함하고 있다. 이를 반대로 말하자면 특별한 조치를 취하지 않는 경우에는 연속체가 아닌 물질에 대한 구현이 매우 쉽게 가능하다는 것이기도 하다. 이에 따라, 기존의 유체에서 사용되는 입자기반 전산해석방식을 지배방정식 단계에서부터 고체입자형으로 변형이 가능하다는 것을 알 수있다. 본 연구에서는 입자기반 전산해석방식을 고체입자에 알맞은 형태로 변환하였다. 변환을 위해 유체에서 사용되는 점성항을 제거하고 대신 마찰항을 추가하였다. 본 연구에서 개발된 고체입자형 전산해석 프로그램을 이용하여 고체입자의 붕괴를 구현하였으며 이를 유체입자 붕괴와의 비교를 통해 입증하였다. 또한 유체입자가 가질 수 없는 고체입자만의 특성인 안식각을 구현하여 고체입자를 위한 입자기반 전산해석 프로그램을 완성하였다.