• 한국수자원학회논문집
• /
• 제50권9호
• /
• pp.587-595
• /
• 2017

본 연구에서는 낙동강에서 보운영에 의한 유사이송능력에 영향을 주는 수리학적 특성변화를 분석하고, 낙동강 주요 4개 지점(낙동, 구미, 왜관, 진동)의 유량-유사량 실측값을 분석하여, 각 지점별 지수형 유량-유사량 관계식을 유도하였다. 모든 지점에서 유사이송능은 감소할 것으로 예측되었으며 실제로 4대강 사업 이후인 2013년도 실측결과 사업 이전에 비해 유사이송 능력이 확연히 감소된 것을 확인하였다. GUIDE 프로그램에서 제공하는 9개 범용 유사이송능 산정기법의 적용성을 검토하여 4개 지점별로 적용 가능한 기법을 선정, 제시하였다. 주요 9개 지류를 포함한 낙동강 전 구간에 대한 유사수지분석 결과 전체적으로 퇴적이 우세한 것으로 나타났다. 유사이송능 산정기법으로는 Engelund-Hansen 공식이 가장 작은 오차를 보였으며 이는 4개 지점별 유사이송능 산정기법 적용성 검토 결과와도 일치한다. 한편 유사수지분석이 내포하는 오차가 낙동강 9개 지류로부터 유입되는 유사량 오차보다 더 작게 나타나 낙동강의 경우 지류의 유입유사량 산정기법에 대한 정밀도 향상이 시급한 과제임을 확인하였다.

• 한국방재학회 논문집
• /
• 제7권1호통권24호
• /
• pp.67-72
• /
• 2007

본 연구에서는 토사에 대한 질량보존의 법칙을 이용하여 자연유역 내 토양의 침식 및 퇴적 잠재능을 산정할 수 있는 모델을 개발하였다. 이 프로그램은 각 셀 별 토사에 대한 질량보존의 법칙을 적용하여 GIS환경하에서 구동 가능하도록 구성되어있으며 셀 별 토사발생량은 RUSLE 공식을 이용하여 산정하였다. 토양의 침식 및 퇴적 잠재능은 토사의 유출량과 유입량의 차에 의해 각 셀이 침식되거나 퇴적된다는 질량보존의 법칙을 이용하여 산정하였다. 질량보존의 법칙을 적용하기 위한 셀 별 토사유출량은 토사발생량과 토사전달률을 곱하여 산정하였으며 이 토사 유출량이 흐름방향 알고리즘에 의해 결정되는 하류 셀의 토사유입량이 된다. 본 연구에서 개발된 모델을 이용하여 국내 소유역에 대해 적용하였으며 그 결과를 실측치와 비교함으로써 모델을 검증하였다.

• Environmental Engineering Research
• /
• 제19권2호
• /
• pp.165-174
• /
• 2014

A model combining multi-dimensional discretized population balance equations with a computational fluid dynamics simulation (CFD-DPBE model) was developed and applied to simulate turbulent flocculation and sedimentation processes in sediment retention basins. Computation fluid dynamics and the discretized population balance equations were solved to generate steady state flow field data and simulate flocculation and sedimentation processes in a sequential manner. Up-to-date numerical algorithms, such as operator splitting and LeVeque flux-corrected upwind schemes, were applied to cope with the computational demands caused by complexity and nonlinearity of the population balance equations and the instability caused by advection-dominated transport. In a modeling and simulation study with a two-dimensional simplified pond system, applicability of the CFD-DPBE model was demonstrated by tracking mass balances and floc size evolutions and by examining particle/floc size and solid concentration distributions. Thus, the CFD-DPBE model may be used as a valuable simulation tool for natural and engineered flocculation and sedimentation systems as well as for flocculant-aided sediment retention ponds.

• 한국해양공학회지
• /
• 제27권2호
• /
• pp.107-113
• /
• 2013

Most natural river reach are approximately balanced with respect to sediment inflow and outflow. Dam construction dramatically alters this balance, creating an impounded river reach characterized by extremely low flow velocities and efficient sediment trapping. The impounded reach will accumulate sediment and lose storage capacity until a balance is again achieved, which would normally occur after the impoundment has become "filled up" with sediment and can no longer provide water storage and other benefits. This paper aims to investigate the sediment removal process in dam reservoir using simultaneously pressure flushing operation and vibrator machine. The main objective of this study is to identify the effect of vibrator in flushing cone dimensions. To achieve the objectives of present study, laboratory test have conducted under different hydraulic conditions such as two bottom outlets with diameter equal to 2" and 3", five discharges 0.23, 0.53, 1.21, 1.53 and 2.1 lit/s and only one water depth above the center of bottom outlets. Using the vibrator machine mounted into the reservoir and close to the bottom outlet, different frequency e.g. 20, 35 and 50 HZ, have been introduced to the deposited sediment at the vicinity of outlet. The results indicate that the volume and width of flushing cone are strongly affected by frequency of vibrations. The results indicate that the volume and width of flushing cone are strongly affected by frequency of vibrations.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.167-167
• /
• 2020

Annual sediment deposition in reservoirs behind weirs poses flood risk, while its accurate prediction remains a challenge. Sediment management by hydraulic flushing is an effective method to maintain reservoir storage. In this study, an integrated approach to predict sediment inflow and sediment flushing simulation in reservoirs is presented. The annual sediment inflow prediction was carried out with Artificial Neural Networks (ANN) modelling. RESCON model was applied for quantification of sediment flushing feasibility criteria. The integrated approach was applied on Sangju Weir and also on estuary of Nakdong River (NREB). The mean annual sediment inflow predicted at Sangju Weir and NREB was 400,000 ㎥ and 170,000 ㎥, respectively. The sediment characteristics gathered were used to setup RESCON model and sediment balance ratio (SBR) and long term capacity ratio (LTCR) were used as flushing efficiency indicators. For Sangju Weir, the flushing discharge, Q_f = 140 ㎥/s with a drawdown of 5 m, and flushing duration, T_f = 10 days was necessary for efficient flushing. At NREB site, the parameters for efficient flushing were Q_f = 80 ㎥/s, T_f = 5 days, N = 1, El_f = 2.24 m. The hydraulic flushing was concluded feasible for sediment management at both Sangju Weir and NREB.

• 한국수자원학회논문집
• /
• 제38권3호
• /
• pp.223-233
• /
• 2005

본 연구에서는 분포형 모형과 셀의 유입, 유출 및 저류량에 대한 질량보존의 법칙을 이용하여 토사의 이송 및 퇴적분포예측기법을 개발하였다. 모형은 (a) 토사침식 예측 (b) 흐름방향 및 유출량 산정 그리고 (c) 토사에 대한 질량보존의 법칙에 따른 셀별 토사이동량 산정의 세 단계로 구성되었다. 토양침식은 범용토양손실공식(USLE)을 활용하였으며 분포형 모형에서의 경사장(L) 산정은 일방향(SF)과 다방향 흐름 알고리즘(MF)을 사용하였다. 경사(S) 산정을 위해서는 Maximum Downhill Slope Method (MDS) and the Neighborhood Method (NBH) 기법을 활용하였고 셀별 토양의 이동은 Ferro등(1998)과 Swift (2000)의 토사전달률(DR)개념을 적용하였다. 개발된 모형은 시험유역의 실측 토사량과의 비교검토를 통하여 검증하였다. 3개의 농업용 저수지 유역에 적용한 결과, Ferro의 토사전달률 산정공식과 MDS, MF 기법을 이용한 해석이 저수지의 운영기록과 가장 유사한 결과를 제시한다는 사실을 확인할 수 있었다.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.19-29
• /
• 2011

In order to assess the influences of bottom sediment on water quality, following measurement were made. (1) Estimations of pollutant loads from the bottom sediment based on mass balance concept, (2) measurements of pollutant concentrations in the sediment to assess the pollution level and influence potential, (3) in situ and laboratory measurements of Sediment Oxygen Demants (SOD) and pollutant load (sediment release) from bottom sediment. Analyses of inflow and outflow loadings using simple mass balance show that there are some variations found according to the pollutants. However, there is no consistent evidence that the sediment can be a source of pollutants. Pollutant concentrations in the sediment range 16~724.8 mg/kg (COD), 1.68 ~12.64 mg/kg (T-P), 5.6~76.8 mg/kg (T-N), 0.32~21.6 mg/kg ($NH_3$-N), 0.092~0.544 mg/kg ($NO_2$-N), 4.8~18.4 mg/kg ($NO_3$-N), and 1.59~11.23 mg/kg ($PO_4$-P). Measured SOD ranges $0.190{\sim}0.802g{\cdot}m^{-2}{\cdot}d^{-1}$ and measured release rate ranges $-1618.42{\sim}10mg/m^2{\cdot}d$(COD), $-12{\sim}16mg/m^2{\cdot}d$(T-P), $-197.37{\sim}140mg/m^2{\cdot}d$(T-N), $0.4{\sim}74.32mg/m^2{\cdot}d$($NH_3$-N), $-2.04{\sim}0.8mg/m^2{\cdot}d$ ($NO_2$-N), $-70{\sim}40mg/m^2{\cdot}d$ ($NO_3$-N), and $-26.11{\sim}28.55mg/m^2{\cdot}d$($PO_4$-P). All study results indicate that bottom sediments in the Seoha weir show only limited effects on the water quality. It implies that sediment dredging is not an effective option or management measure to reduce pollutant loading.

• 산업기술연구
• /
• 제19권
• /
• pp.391-402
• /
• 1999

The numerical model predicting the behaviours of submerged mound constructed by dredged material is developed in this paper. The model is based on the Bailard's sediment transport formula, Stokes' second-order wave theory and the sediment balance equation. Nonlinear partial differential equation which is the same form as convection-dispersion equation which represents change of bed section can be obtained by substituting sediment transport equation for equation of sediment conservation. By this process, the analytical solution by which the characteristic of the behaviours of submerged mound can be estimated is derived by probably combining the convention coefficient and the dispersion coefficient governing the behaviours of submerged mound and the probability density function representing the wave characteristics. The validity of the analytical solution is verified by comparing the analytical solution which is assumed to estimate the movement rate submerged mound by bed-load with the field data of the past and its characteristic is analyzed quantitatively by obtaining the mean of the dispersion coefficient representing the extent of the decrease rate of the submerged mound height.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.62-66
• /
• 2010

This study presents velocities of bedload sediment transport in both longitudinal and lateral directions and applied in considering morphological change of straight open channel. The velocities of particle motion have obtained by considering the forces balance acting on particles on the bed between the drag, tangential component of the immersed weight of the particle, and Coulomb's resistive forces. Numerical profiles of particle motion velocities reveals good agreement in comparison between this study and Kovacs and Parker (1994). The evaluated velocities components of particle transport are get used to estimate bedload transport rate in considering morphological change of straight open channel. For the application, numerical solution is applied to laboratory experiment which shows very close solution profiles between this study and observed data of a self-formed straight channel.

• Journal of the korean society of oceanography
• /
• 제37권3호
• /
• pp.144-153
• /
• 2002

This is a review paper, assessing progress reported in a Special Issue (Prandle and Lane, 2000) of Coastal Engineering focusing on simulation of SPM in the North Sea, against issues over a diverse range of shelf seas and their coastal margins. The broad objectives of reproducing the characteristics of sediment fluxes off an open coast and relating these to tidal and wave forcing were achieved. However, accurate computation of these fluxes remains sensitive to largely empirical coefficients used in determining erosion and deposition rates. Bed roughness strongly influences both these coefficients and the associated near-bed current magnitudes (including wave impact thereon). Bed roughness can change significantly over a tidal cycle and dramatically over seasons or in the course of a major event. Accurate simulation of sediment fluxes on a day-to-day basis is constrained by dependency on the initial distribution of mobile sediments. The latter depends on rates and locations of original sources and the time history of preceding events. Remote sensing via aircraft could provide data for assimilation into such models to circumvent these constraints. The approaches described here can be readily applied to other coastal regions to indicate the likely distributions and pathways of known sediment sources. However quantitative simulations will require an associated observational programme. A subsequent stage is to understand the evolving balance between the forecasted sediment movement - the resulting morphological adjustments and thence modifications to the prevailing tidal current and wave regimes.