• Journal of the Korea Society for Simulation
• /
• v.31 no.2
• /
• pp.21-32
• /
• 2022

The ROK Navy is seeking to secure an aircraft carrier(CVX) to take responsibility for the maritime security of the Republic of Korea. In order for the CVX to complete the mission given to it, the crew must be able to operate the CVX perfectly, and for this purpose, the operating skills of the CVX crew result from constant training. Therefore, this paper proposes an On-board Training System(OBTS) so that the best training can always be performed even on ship. CVX OBTS should be built in the form of a thorough simulator based on a Synthetic Training Environment(STE) so that it can be optimally applied to ship and provide the best training environment to the crew. In order to satisfy the various training requirements and implementation conditions of the CVX, this paper proposes a plan to consist of Embedded Training System(ETS), VR training system, AR maintenance system, MR training system, MR metaverse training system, and realistic simulator training system.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.77-86
• /
• 2024

'UAS flight recording system' is a system that is mounted on an unmanned aircraft system consisting of various components and records flight-related data. The data recorded by this system should be used for aviation accident and incident investigations to prevent similar accidents. In particular, for the category of UAS with high operating risk, safety devices close to that of manned aircraft are required, and it is urgent to develop flight recording systems reflecting the characteristics of the UAS to secure airworthiness. This paper highlights the need for UAS flight recording systems for aviation accident and incident investigations and seek a method to derive flight recording system parameters for 'Certified Category' with high operational risk. To this end, Inter-City UAM was used as a concrete use case, and the process of approaching system parameters was devised by assuming accident occurrences and hazards from mission profiles and scenarios. As a result of the study, it was confirmed that parameters could be derived through this process.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.1
• /
• pp.79-86
• /
• 2004

In general, operating system is offering the security function of OS level to support several web services. However, it is true that security side of OS level is weak from many parts. Specially, it is needed to audit/trace function in security kernel level to satisfy security more than B2 level that define in TCSEC(Trusted Computer System Evaluation Criteria). So we need to create audit data at system call invocation for this, and do to create audit data of equal format about almost event and supply information to do traceback late. This Paper Proposes audit/trace system module that use LKM(Loadable Kernel Module) technique. It is applicable without alteration about existing linux kernel to ensure safe evidence. It offers interface that can utilize external audit data such as intrusion detection system, and also offers safe role based system that is divided system administrator and security administrator These data will going to utilize to computer forensics' data that legal confrontation is Possible.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.129-131
• /
• 2000

We must precisely understand the current state of system for efficiently and safely operating the power system of subway and it is the important problem to secure the high-quality data for state estimation. The current state of subway system is calculated by data to be transmitted to central control office from every place to install the measuring instruments so the high accuracy and trust can be maintained if the measured data have a high quality. But it is difficult to estimate the accurate state of system because of the noises in transit data and the inaccuracy due to errors of measuring instruments. So the object is to reduce the difference from the real value in terms of improving considerably the inaccuracy due to instrumental errors and noises using the state estimation method. In this paper we estimate the accurate state of the subway power system in the arbitrary measured values of a Sangin station in Deagu subway, and consider the possibility to apply to the real subway power system on the basis of that. This test shows to make sure of the possibility to apply to the real system usefully.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.69-77
• /
• 2019

Today, most of elevators have an emergency call facility for emergency situations. However, if the network installed in the elevator is also out of power, it cannot be used for the elevator remote monitoring and management. So, we develop an integrated and unified emergency call system, which can transmit not only telephone call but also data signals using PSTN(Public Switched Telephone Network) in order to remote monitoring and management of elevators, even though a power outage occurs. The proposed integrated emergency call system to process multiple data such as voice and operational information is a multi-channel board system which is composed of an emergency phone signal processing module and an operational information processing module in the control box of elevator. In addition, the RMS(remote management server) systems based on the Web consist of a dial-up server and a remote monitoring server where manages the elevator's operating information, status records, and operational faults received via the proposed integrated and unified emergency call system in real time. So even if there's a catastrophic emergency, the proposed RMS systems shall ensure and maintain the safety of passengers inside the elevator. Also, remote control of the elevator by this system should be more efficient and secure. In near future, all elevator emergency call system need to support multifunctional capabilities to transmit operational data as well as phone calls for the safety of passengers. In addition, for safer elevators, it is necessary to improve them more efficiently by combining them with high-tech technologies such as the Internet of Things and artificial intelligence.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.582-588
• /
• 2013

Solid Oxide Fuel Cell (SOFC) has been focused as a promising power source, which can replace a diesel engine regarding as major source of air pollution by the ship, due to high efficiency and eco-friendly. High operating temperature of SOFC is enable to secure of high efficiency, use various fuels and no need of high priced catalyst, but it may damage to components of SOFC. Therefore temperature control system has to be designed and validated before employing the fuel cell system for securing high efficiency and reliability. In this paper, instead of using typical method to validate performance of the controller, which consumes high cost and time, performance validation system using Hardware-in-the-loop simulation was developed and validated performence of the designed temperature controller for SOFC system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.44-51
• /
• 2005

Water flow in rivers during flood season can be 10 to 100 fold higher than normal seasons (low precipitation) in Japan and predicting flood runoff is essential for operating reservoirs with discharging gates. Abundant experiences and knowledge are requisites for operators to be able to make efficient decisions at work. This research investigated a method to transfer technical knowledge by acquiring skills and knowledge from actual dam operators and by using the information to construct an educational training system. The purpose of the research was to enable the execution of a secure and rational reservoir operation during flood period. The educational training system for reservoir operation was developed with the focuses on acquiring knowledge on hydraulics and hydrology and learning about decision making related to the reservoir operation as well as the timing of control. The system is capable of conducting education that corresponds to individual levels in each location. Of the educational training methods, a lecture method that uses textbooks is effective for the understanding of basic knowledge and concepts while a training method that uses a simulation device is essential for the practice of advanced and specialized procedures in specific fields. Simulation devices are used in operational training for airplane flight and driving cars and trains. The educational system presented here was designed to provide further assistance to those who have acquired basic knowledge and concepts through textbooks and also to at low them to perform the satisfactory operation of dam equipment. Our research proposes a method which can realize a system to acquire technical skills-the skills which are the foundation of technical knowledge and operation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.2
• /
• pp.149-155
• /
• 2023

Photovoltaic power generation is the most familiar power generation facility among new and renewable energies, and its supply began to expand about 10 years ago, and at this point, interest in solutions and technologies for system maintenance management is increasing. In particular, it is necessary to take measures to maximize the overall efficiency of the solar power generation system, whether or not there is an abnormality in the solar power generation system, and when to replace parts. The PV inverter, one element of the photovoltaic power generation system, is a power conversion system that relies on power switching devices, and DC-Link capacitors are used according to the configuration of DC/DC converters and DC-AC inverters. These DC capacitors also affect system safety (Safety) through renewable energy facilities due to the decrease in power generation of PV inverters, power loss, and increase in harmonics (THD, total distortion of AC output current) due to aging and deterioration due to long-term use. factors can be analyzed. Therefore, in this paper, the PV inverter operating characteristics according to the DC capacitor capacity state currently operating in the photovoltaic power generation system were considered, and research contents were proposed to secure the safety and reliability of renewable energy facilities.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1086-1090
• /
• 2004

Architecture generation is the first step in the design of software systems. Most of the qualities that the final software system possesses are usually decided at the architecture development stage itself. Thus, if the final system should be usable, testable, secure, high performance, mobile and adaptable, then these qualities or non-functional requirements should be engineered into the architecture itself. In particular, adaptability is emerging as an important attribute required by almost all software systems. The machinery and tools in the remote site surveillance and connects intelligence information machinery and tools at Internet. We need the server which uses different embedded operating system to become private use. With the progress of information-oriented society, many device with advanced technologies invented by many companies. However, the current firmware technologies have many problems to meet such high level of new technologies. In this paper, we have successfully ported linux on an embedded system, which is based on intel Strong ARM SA-1110 processor, then written several network modules for internet-based network devices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.133-138
• /
• 2022

In this paper we present the system we produced to help workers at logistic centers and prevent accidents, in which they could get hurt. As a base we use the main control device, named Arduino uno, which measures the weight by using load cells. When operating with the system, by placing object on it, the system measures the weight of the object and keeps the highest point at the same height by lowering its board. This improves the convenience while placing and removing objects from the board. If the weight of the placed object is exceeding the set value the board will also lower itself to secure the safety. By using a line tracer system, the objects are being moved only on a set route with the goal to make it even more comfortable to use.