• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3334-3343
• /
• 1996

A quantitative flow visualization technique was developed to measure velocity and temperature fields simultaneously in a two-dimensional cross section of thermo-fluid flows. Thermochromic liquid crystal(TLC) particles are used as temperature sensor and velocity tracers. Illuminating a thermo-fluid flow with a thin sheet of white light, the reflected colors from the TLC particles in the flow were captured simultaneously by two CCD cameras; a 3-chip CCD color camera for temperature field measurement and a black and white CCD camera for velocity field measurement. Variations of temperature field were measured by using a HSI true color image processing system and TLC solution. The relationship between the hue values of TLC color image and real temperature was obtained and this calibration curve was used to measure the true temperature under the same camera and illumination condition. The velocity field was obtained by using a 2-frame PTV technique using the concept of match-probability to track true velocity vectors from two consecutive image frames. These two techniques were applied at the same time to the unsteady thermal-fluid flow in a Hele-Shaw cell to measure the temperature and velocity field simultaneously and some results are discussed.

• 한국통신학회논문지
• /
• 제39A권6호
• /
• pp.322-332
• /
• 2014

본 논문에서는 굴곡진 도로를 구간 선형 모델로 근사화한 차선 검출 알고리즘을 제안한다. 기존의 차선 검출 알고리즘들은 지표면이 평면이라는 가정을 이용하기 때문에, 도로면이 굴곡진 실제 도로에서는 강건한 차선 검출이 어렵다. 제안하는 방법에서는 이 문제를 전체 차로를 구간으로 분할하고, 각 구간 내에서 차로를 가장 잘 근사하는 평면 차로를 구함으로써 해결한다. 이를 위해 각 구간 내에서 다양한 각도와 위치를 가지는 평면 형태의 구간 차로 후보들을 생성하였다. 구간 차로 후보들의 연결 조합 중 실제 차로에 가장 가까운 조합을 다이나믹프로그래밍을 이용하여 찾음으로써 굴곡진 차로를 근사한다. 평면 도로 뿐 아니라, 상하, 좌우의 굴곡이 있는 도로 영상으로 구성된 데이터세트에 대하여 제안하는 방법의 차선 검출 성능을 검증하였다. 평면 도로를 가정한 기존의 방법들이 80%에서 90% 초반의 검출률을 보이는 반면, 제안하는 방법은 90% 후반의 검출률을 보임을 통해 굴곡진 도로에서의 차선 검출의 강건성을 입증하였다.

• 디지털융복합연구
• /
• 제12권11호
• /
• pp.357-364
• /
• 2014

기존 증강현실 콘텐츠 경우 고정된 마커를 빠르게 이동시키면 가시화에 끊김 현상이 발생하게 된다. 따라서 동적 마커를 사용할 경우에도 콘텐츠가 끊어짐 없이 사용자에게 제공되는 방법이 요구된다. 카메라에 입력된 한 장의 이미지 내에 두 개 이상의 마커가 존재할 경우 기존의 이미지 기반 마커와 SLAM(Simultaneous Localization & Mapping) 방식을 통해서는 각각의 마커를 동시에 추적할 수 없다. 본 논문은 각 마커 위에 정합된 객체들 간의 상호작용은 불가능하다는 점을 극복함은 물론, 빠르게 움직이는 마커를 실시간으로 추적하여 그 위에 원하는 객체를 정확하게 증강 가시화하는 방법론을 제안한다. 이를 위해, 주행형 로봇과 시범 콘텐츠의 가상로봇을 동기화하여, 주행형 로봇 상에 콘텐츠가 가시화되도록 하였다. 그리고 카메라 한 대로 다중 동적객체를 추적하여 서로 상호작용하는 기술을 제안하였다. 결과적으로 가상로봇과 실제로봇을 연동하여 상호작용하도록 함으로써 실시간 동적객체 추적 및 가시화 기술의 유용성을 검증하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.274-281
• /
• 2018

Experimental studies of the hydrodynamic performance of the draft tube conical spout-fluid bed (DCSF) were conducted using pharmaceutical pellets. The experiments were carried out in a DCSF consisted of two sections: (a) a conical section with the cross section of $120mm{\times}250mm$ and the height of 270 mm, (b) a cylindrical section with the diameter of 250 mm and the height of 600 mm. The flow characteristics of solids were investigated with a high speed camera and a pezoresistive absolute pressure transducer simultaneously. These characteristics revealed different flow regimes in the DCSF: packed bed at low gas velocities, fluidized bed in draft tube at higher gas velocities until minimum spouting, and spouted bed. The stable spouting was identified by the presence of two dominant frequencies of the power spectrum density of pressure fluctuation signature: (i) the frequency band 6-9 Hz and (ii) the frequency band 12-15 Hz. The pressure drops across the draft tube as well as the annulus measured in order to better recognize the flow structure in the DCSF. It was observed that the pressure drop across the draft tube, the pressure drop across the annulus, and the minimum spouting velocity increase with the increase in the height of draft tube and distance of the entrainment zone, but with the decrease in the distributor hole pitch. Finally, this study provided novel insight into the hydrodynamic of DCSF, particularly minimum spouting and stable spouting in the DCSF which contains valuable information for process design and scale-up of spouted bed equipment.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1507-1519
• /
• 2003

The two-phase flow patterns for both non-loop and loop type oscillating capillary tube heat pipes (OCHPs) were presented in this study. The detailed flow patterns were recorded by a high-speed digital camera for each experimental condition to understand exactly the operation mechanism of the OCHP. The design and operation conditions of the OCHP such as turn number, working fluid, and heat flux were varied. The experimental results showed that the representative flow pattern in the evaporating section of the OCHP was the oscillation of liquid slugs and vapor plugs based on the generation and growth of bubbles by nucleate boiling. As the oscillation of liquid slugs and vapor plugs was very speedy, the flow pattern changed from the capillary slug flow to a pseudo slug flow near the annular flow. The flow of short vapor-liquid slug-train units was the flow pattern in the adiabatic section. In the condensing section, it was the oscillation of liquid slugs and vapor plugs and the circulation of working fluid. The oscillation flow in the loop type OCHP was more active than that in the non-loop type OCHP due to the circulation of working fluid in the OCHP. When the turn number of the OCHP was increased, the oscillation and circulation of working fluid was more active as well as forming the oscillation wave of long liquid slugs and vapor plugs in the OCHP. The oscillation flow of R-142b as the working fluid was more active than that of ethanol and the high efficiency of the heat transfer performance of R -142b was achieved.

• 디지털융복합연구
• /
• 제19권8호
• /
• pp.195-203
• /
• 2021

본 연구는 사람의 사용자 전신을 촬영한 이미지를 분석하여, 사용자별 움직임에 대한 정상 가동 범위를 영상으로 디스플레이(display)하는 운동 트레이닝 시스템 구축에 관한 것이다. 본 연구는 입점(立點, standing point)을 기준으로 사용자 전신의 정면과 측면을 촬영하는 카메라부(C), 그리고 카메라부의 촬영 이미지를 분석하여 인체의 관절 위치에 노드(node)를 설정하고, 입점을 원점으로 하는 공간좌표계에 노드를 배치하여 그 사용자의 노드 좌표값을 도출하는 이미지 분석부(I·A)와 이미 설정된 표준 노드 좌표값에 매칭된 운동 동작별 정상 노드 가동범위를 사용자 노드 좌표값에 맞추어 보정하여, 상기에서 언급한 사용자 노드 정상 가동 상태를 정면 영상과 측면 영상으로 생성하여 디스플레이하는 재생부(R·P)를 포함하고 있는 시스템으로 구성된다. 따라서 연구의 방법으로는 주요선행연구와 자료조사를 통해 선행 연구와의 차별성을 기할 수 있는 방법을 제시했으며, 이에 따른 운동 트레이닝 시스템을 구축하고자 하는데 연구의 목적을 둔 것이다.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.417-426
• /
• 2006

A Digital X-ray imaging system using Compton backscattering has been developed to obtain a cross-sectional profile and mass loss of corroded lap-splices of aging aircraft from density variation. A slit-type camera was designed to focus on a small scattering volume inside the material, from which the backscattered photons are collected by a collimated scintillator detector for interpretation of material characteristics. The cross section of the lap-joint is scanned by moving the scattering volume through the thickness direction of the specimen. The mass loss of each layer has been estimated from a Compton backscatter A-scan to obtain the thickness of each layer including the aluminum sheet, the corrosion layer and the sealant. Quantitative information such as location and width of planar corrosion in the lap splices of fuselages is obtained by deconvolution using a nonlinear least-square error minimization method(BFGS method): A simple reconstruction model is also introduced to overcome distortion of the Compton backscatter data due to attenuation effects attributed to beam hardening and quantum noise.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.38-44
• /
• 1995

This paper presents a method to measure the position and orientation of a Cylindrical Object(unknown the eiameter and length) lying on a floor, using a camera. The two extreme cross section of the cylinder will be viewed as distorted ellipese or circular are, while its limb edge will be shown as two straight lines. The diameter of the cylinder is determined from the geometric properties of the two straight lines, which in turn provides information regarding the length of the cylinder. From the 3-dimensional measurement, the 3D coordinates of the center points of the two extreme cross sections are determined to give the position and orientation of the cylinder. This method is used for automated pick-and-place operations of cylinder, such as sheet coils, or drums in warehouses.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.513-516
• /
• 2002

The flow structure and heat transfer characteristics of a turbulent buoyant jet were investigated experimentally. The instantaneous temperature and velocity fields in the near field were measured using a two-frame PIV and PLIF techniques. A thin light sheet illuminated a two-dimensional cross section of the buoyant jet in which Rhodamine B was added as a fluorescent dye. The intensity variations of LIF signal from Rhodamine B molecules scattered by the laser light were captured by a CCD camera after passing an optical filter. By ensemble averaging the instantaneous temperature and velocity fields, the mean temperature and velocity fields as well as the spatial distributions of turbulent statistics were obtained. The results show the flow structure and convective heat transfer of the developing shear layer in the near field.

• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.48-53
• /
• 2011

The shape of nozzle cross-section plays an important role in stabilizing electrospray jet. The angle of contact line is governed based on the famous Young-Laplace equation. Compared to a round nozzle that has a constant curvature along the orifice, the square nozzle has four square corner edges and four straight edges that hold the meniscus in a different manner and is of interest in this study. By utilizing both square and round capillary nozzle, we examine the effect of nozzle shape in electrohydrodynamic jetting. The ejections were recorded with a high speed camera and analyzed to examine the jetting repeatability based on dynamic movement of meniscus. The result suggests that if the corner edges are not sharp, then its effect on repeatability is also limited.