• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.165-179
• /
• 2007

이 논문에서는 철근콘크리트 구조물의 최적설계를 위해 기둥과 보 부재 설계 단면의 데이터베이스를 구성하고 이로부터 단면 번호와 단면 저항 능력간의 관계를 나타내는 회귀분석식을 구성하여, 직접 탐색법으로 빠르게 최적해를 검색하는 효율적인 알고리즘을 제안하였다. 설계 실무에서 가격을 고려하여 설계하기보다는 성능 최적화에 가까운 설계를 수행한다는 사실로부터 제안된 알고리즘을 이용하여 성능 최적화와 가격 최적화를 모두 수행하여 그 결과를 비교 검토하였고, 예제 구조물을 대상으로 적용성과 효율성을 검토하였다. 본 알고리즘은 목적 함수 구성시 제한 조건이 없고 전개 과정이 매우 단순하면서도 빠른 수렴성을 보이며 선택된 해가 설계 규준과 실무상의 제한 조건에 부합하므로 바로 적용 가능하다는 장점이 있다. 전체 구조물의 최적화는 개별 부재의 최적화를 통해 이루어진다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.391-394
• /
• 2005

A theoretical model was developed to predict the shear strength of slender reinforced concrete beams. The shear force applied to a cross-section of the beam was assumed to be resisted primarily by the compressive zone of intact concrete rather than by the tensile zone. The shear capacity of the cross section was defined based on the material failure criteria of concrete: failure controlled by compression and failure controlled by tension. In the evaluation of the shear capacity, interaction with the normal stresses developed by the flexural moment in the cross section was considered. In the proposed strength model, the shear strength of the beam and the location of the critical section were determined at the intersection between the shear capacity and shear demand curves. The proposed strength model was verified by the comparisons to prior experimental results.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.668-673
• /
• 2003

Line Capacity is a criteria for transport capacity and is used to evaluate railroad investment alternatives or to decide train frequency when establish transportation plan. There are two methodologies to increase transport capacity of railway. One is to invest railroad equipment or vehicles, and the other is to improve operation efficiency through optimization. Such all efforts are intended to increase transport capacity by improving line capacity. So far, this criteria is calculated statical and experimental numerical formula. But, line capacity has special attribute that changes dynamically according to operational conditions, so there is a need of new line capacity estimation system. In this paper, we present a new estimation method of line capacity based on the probability simulation, and apply to normal railline section and special structured railine section.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.599-621
• /
• 2016

In order to study the working mechanism of rectangular steel-concrete composite columns subjected to compression-bending load and further determine the seismic performance index, a bottom strengthened rectangular steel reinforced concrete (SRC) column with concealed steel plates and a bottom strengthened rectangular concrete filled steel tube (CFST) columns were proposed. Six column models with different configurations were tested under horizontal low cyclic loading. Based on the experiments, the load-bearing capacity, stiffness and degradation process, ductility, hysteretic energy dissipation capacity, and failure characteristics of the models were analyzed. The load-bearing capacity calculation formulas for a normal section and an oblique section of bottom strengthened rectangular steel-concrete composite columns were pesented and a finite element (FE) numerical simulation of the classical specimens was performed. The study shows that the load-bearing capacity, ductility, and seismic energy dissipation capacity of the bottom strengthened rectangular steel-concrete composite columns are significantly improved compared to the conventional rectangular steel-concrete composite columns and the results obtained from the calculation and the FE numerical simulation are in good agreement with those from the experiments. The rectangular steel-concrete composite column with bottom strengthened shows better seismic behavior and higher energy dissipation capacity under suitable constructional requirements and it can be applied to the structure design of high-rise buildings.

• 한국안전학회지
• /
• 제7권4호
• /
• pp.63-71
• /
• 1992

Generally, Web & Flange of I shape beam are composed of plane for optimization of measurement in investigating the behavior resistant to horizontal force and bending moment on large section Therefore, longitudinally traperzoidal web section beam has an important function as a body for carrying more load and ensuring more support area. There is only a limited usefulness for analyzing the behavior of web section with opening. It is experimentally verified that this traperzoidal web section has a good resistant caopacity. conclustions on the above research results are as follows : 1) resistant capacity on the above can be more 15% increased than normal case 2) stiffener welding work and complexity of shopdrawing can be excluded in advance 3) traperzoidal section can be applied in structural practice.

• Steel and Composite Structures
• /
• 제47권3호
• /
• pp.375-382
• /
• 2023

The H-shaped steel beam is popular due to its ease of manufacturing and connection to the column. This profile, which is used as a shallow beam, needs the high weak-axis bending stiffness and torsional stiffness to meet the overall stability. Achieving the local beam flange stability, bearing capacity, bending stiffness, and torsional requirements need a great thickness and width of the beam flange, which causes, which will cause more uneconomical structural design. So, the box-section beam is the ideal alternative. However, the current design specifications do not have design rules for the bolt-and-welded connection of the box-section beam and box-section column. The paper proposes a novel bolt-and-welded connection of the box-section beams and box-section columns based on a high-rise structural design scheme. Three connection models, BASE, WBF, and RBS, are analyzed under cyclic loading in ABAQUS software. The failure modes, hysteresis response, bearing capacity, ductility, plastic rotation angle, energy dissipation, and stiffness degradation of all models are determined and compared. Compared with the other two models, the model WBF exhibited excellent seismic performance, ductility, and plastic rotation ability. Finally, model WBF was chosen as the connection scheme used in the project design.

• Steel and Composite Structures
• /
• 제25권1호
• /
• pp.79-92
• /
• 2017

Initial damage to a stud due to corrosion, fatigue, unexpected overloading, a weld defect or other factors could degrade the shear capacity of the stud. Based on typical push-out tests, a FEM model and theoretical formulations were proposed in this study. Six specimens with the same geometric dimensions were tested to investigate the effect of the damage degree and location on the static behavior and shear capacity of stud shear connectors. The test results indicated that a reduction of up to 36.6% and 62.9% of the section area of the shank could result in a dropping rate of 7.9% and 57.2%, respectively, compared to the standard specimen shear capacity. Numerical analysis was performed to simulate the push-out test and validated against test results. A parametrical study was performed to further investigate the damage degree and location on the shear capacity of studs based on the proposed numerical model. It was demonstrated that the shear capacity was not sensitive to the damage degree when the damage section was located at 0.5d, where d is the shank diameter, from the stud root, even if the stud had a significant reduction in area. Finally, a theoretical formula with a reduction factor K was proposed to consider the reduction of the shear capacity due to the presence of initial damage. Calculating K was accomplished in two ways: a linear relationship and a square relationship with the damage degree corresponding to the shear capacity dominated by the section area and the nominal diameter of the damaged stud. This coefficient was applied using Eurocode 4, AASHTO LRFD (2014) and GB50017-2003 (2003) and compared with the test results found in the literature. It was found that the proposed method produced good predictions of the shear capacity of stud shear connectors with initial damage.

• 한국전문물리치료학회지
• /
• 제9권2호
• /
• pp.145-156
• /
• 2002

The objectives of this study were to investigate the effects of thoracic flexibility exercise on chest function and mobility and to provide the information of physical therapy for patients with idiopathic scoliosis. Forty female subjects who were diagnosed with scoliosis participated in this study and were divided into the experimental and control groups. The experimental group consisted of 20 patients who were treated with thoracic flexibility exercise program during the admission (10 days) ad one month after discharge. The control group consisted of 20 patients who were not treated with thoracic flexibility exercise program. Vital capacity was measured using a respirometer. The chest expansion were calculated using differences of chest circumference between maximum inspiration and maximum expiration measured under armpits, at the junction between the sternum and xyphoid process, and at the waist. All subjects were measured two times: before the admission and at one month after discharge. Data were compared by groups using independent t-test, Vital capacity and chest expansion values (the armpit, chest and waist values) were significantly higher for the experimental group compared to those of the control group (p<.05). The findings of this study show that thoracic flexibility exercise program can lead to an increase in vital capacity and chest expansion and has a positive effects in relieving symptoms and restoring thoracic mobility.

• Structural Engineering and Mechanics
• /
• 제84권4호
• /
• pp.547-560
• /
• 2022

By presetting various reinforcement diameters in topology optimization with the discrete model finite element analysis, an algorithm of bidirectional evolutionary structural optimization of multi-level reinforcement diameter is presented to obtain the optimal reinforcement topologies which describe the degree of stress of different parts. The results of a comparative study on different reinforcement feasible domain demonstrate that the more angle types of reinforcement are arranged in the initial domain, the higher utilization rate of reinforcement of the optimal topology becomes. According to the nonlinear finite element analysis of some deep beam examples, the ones designed with the optimization results have a certain advantage in ultimate bearing capacity, although their failure modes are greatly affected by the reinforcement feasible domain. Furthermore, the bearing capacity can be improved when constructional reinforcements are added in the subsequent design. However the adding would change the relative magnitude of the bearing capacity between the normal and inclined section, or the relative magnitude between the flexural and shear capacity within the inclined section, which affects the failure modes of components. Meanwhile, the adding would reduce the deformation capacity of the components as well. It is suggested that the inclined reinforcement and the constructional reinforcement should be added properly to ensure a desired ductile failure mode for components.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.583-588
• /
• 2007

For the purpose of optimum design of RC frame structures. pre-determined section database of column and beam are constructed and arranged in order of the resisting capacity. Then, regression equations representing the relation between section number and resisting capacity are derived. In advance. effective optimization algorithms which search optimized solution quickly using direct search method from these database are proposed. Moreover. the investigation for the applicability and effectiveness of the introduced design procedure is conducted through correlation study for example structures.