• Journal of The Korean Association For Science Education
• /
• v.11 no.2
• /
• pp.13-21
• /
• 1991

For development of teaching model for observational experiment and the major contents of science education guide books published for secondary school teacher in America, the actual survey to the secondary schools and the investigation of science education guide were carried out. The results were summarized as follows. 1. The major concepts of contents in science education books are constituted of introduction(9.67%), ability(8.94%), activity(6.61%), curriculum(11.61%), instruction planning(5.25%), instruction strategy(l7.74%), materials and facilities(1O.97%), evaluation(8.62%), society and community(l0.55%), guidelines(4.76%), practice(3.54%), and index(1.74%). 2. The constitution of multimedia teaching model for observational instruction was developed and arranged in order of six steps as observation, materialization, broad understanding, advanced study, application, and synthesis. This model was thought as the most effective for the achievement of the instructive goal for observational unit and others.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.225-231
• /
• 1999

A lubrication model on a two dimensional Reynolds equation is presented in this paper. And also this paper gives mathematical models of primary and secondary motion of piston skirt.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.116-121
• /
• 2011

Performance of Secondary Injection Thrust Vector Control system is investigated under various secondary injection operating conditions. 3-dimensional converging-diverging nozzle having 8 secondary injection nozzles is used in this numerical study. Total pressure of flow inside the nozzle is about 70bars, and total temperature set to 300K for cold flow simulation. Effect of secondary injection flow rate and injection nozzle configuration is considered in this research. Simulation is conducted with commercial CFD code Ansys Fluent v13. Spalart-Allmaras(1-equation)model is used for turbulence modeling with AUSM+ scheme. Various performance factors as Axial thrust, side force, system specific impulse ratio are considered and explained for system performance evaluation.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.13 no.1
• /
• pp.96-106
• /
• 2006

Purpose: This study was dont: to evaluate the factors that influence secondary traumatic stress, burnout, and physical symptoms experienced by firefighters. In addition, a hypothetical model was developed. Method: The data were collected using self-reported questionnaires from 410 field service firefighters. Data analysis was done with the SPSSWIN 10.0 program for descriptive statistics and Windows LISREL program to determine the causal relationship between the measurement variables. Results: The hypothetical model which was developed fits well with actual data(${\chi}^2$=3.16, p=0.99, GFI=1.00, AGFI=0.99, NFI=0.99, and NNFI=1.06). The variable, personality type, social support, and impact mobilization frequency had a significant effect and accounted for 7% of the secondary traumatic stress in firefighters. The variables, career, social support, and secondary traumatic stress had a significant effect and accounted for 24% of the burnout in firefighters. Social support, impact mobilization frequency, and secondary traumatic stress were important variables and accounted for 31% of the physical symptoms in firefighters. Conclusion: It is necessary for firefighters to manage themselves according to their personality types. Strategies that can increase the firefighters' social support and decrease their perceived secondary traumatic stress also need to be developed to minimize or prevent a negative effect on their health.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.2 s.11
• /
• pp.11-14
• /
• 2005

In plasma processing reactors, it is common practice to control plasma density and ion bombardment energy by manipulating excitation voltage and frequency. In this paper, a dually excited capacitively coupled rf plasma reactor is self-consistently simulated with a three moment model. Effects of phase differences between primary and secondary voltage waves, simultaneously modulated at various combinations of commensurate frequencies, on plasma properties are investigated. The simulation results show that plasma potential and density as well as primary self-dc bias are nearly unaffected by the phase lag between the primary and the secondary voltage waves. The results also show that, with the secondary frequency substantially lower than the primary frequency, secondary self·do bias remains constant regardless of the phase lag. As the secondary frequency approaches to the primary frequency, however, the secondary self-dc bias becomes greatly altered by the phase lag, and so does the ion bombardment energy at the secondary electrode. These results demonstrate that ion bombardment energy can be more carefully controlled through plasma simulation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.643-651
• /
• 2008

In the present paper, turbulent open-channel flows over longitudinal bedforms are numerically simulated. The Reynolds- averaged Navier-Stokes equations in curvilinear coordinates are solved with the non-linear $k-{\varepsilon}$ model by Speziale( 1987). First, the developed model is applied to rectangular open channel flows for purposes of model validation and parameter sensitivity studies. It is found that the parameters $C_D$ and $C_E$ are important to the intensity of secondary currents and the level of turbulent anisotropy, respectively. It is found that the non-linear $k-{\varepsilon}$ model can hardly reproduce the turbulence anisotropy near the free surface. However, the overall pattern of the secondary currents by the present model is seen to coincide with measured data. Then, numerical simulations of turbulent flows over longitudinal bedforms are performed, and the simulated results are compared with the experimental data in the literature. The simulated secondary currents clearly show upflows and downflows over the ridges and troughs, respectively. The numerical results of secondary currents, streamwise mean velocity, and turbulence structures compare favorably with the measured data. However, it is observed that the secondary currents towards the troughs were significantly weak compared with the measured data.

• Journal of computational fluids engineering
• /
• v.8 no.2
• /
• pp.8-15
• /
• 2003

Three nonlinear κ-ε models with the wall function method are applied to the fully developed turbulent flow in a triangular subchannel of a bare rod bundle. Typical predicted quantities such as axial and secondary velocities, turbulent kinetic energy and wall shear stress are compared in details both qualitatively and quantitatively with both each other and experimental data. The nonlinear κ-ε models by Speziale[1] and Myong and Kasagi[2] are found to be capable of predicting accurately noncircular duct flows involving turbulence-driven secondary motion. The nonlinear κ-ε model by Shih et aL.[3] adopted in a commercial code is found to be unable to predict accurately noncircular flows with the prediction level of secondary flows one order less than that of the experiment.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.603-606
• /
• 2002

Numerical analysis and its inverse design process of 2nd stage of JT8D aircraft engine is described. One of the most important factors that affect the performante of turbomachine is secondary flow in the blade passage, so that the performance of turbomachine can be improved by controlling secondary flow. In this paper, as a method to control secondary flow, commercial inverse design program, TurboDesign is used. Meridional derivative of angular momentum is selected as a parameter to control blade leading in this program, To validate inverse designed model, computational analysis is applied which includes rotor-stator-interaction. In this paper, CFB results of both original and inverse designed model are compared to examine how much the performance improves without reduction of work output.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.5
• /
• pp.453-461
• /
• 1990

In this paper, a short primary-short secondary single-sided linear induction motor which is used as the driving source for an automatic conveyor system, is selected as an analysis model. The finite element method in which the current vector potential is introduced is adopted to analyze the eddy current distribution and thrust force which are produced according to the relative position of the primary and the secondary. Also, the analysis results are compared with experimental ones, to show the propriety of this model.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.265-267
• /
• 2012

This paper analyzes network selection issues of secondary users (SUs) in Cooperative Cognitive Radio Networks (CRNs) by utilizing Queuing Model. Coordinating with Handover Cost-Based Network selection, this paper also addresses an opportunity for the secondary users (SUs) to enhance QoS as well as economics efficiency. In this paper, network selection of SUs is the optimal association between Overall System Time Minimization Problem evaluation of Secondary Connection (SC) and Handover Cost-Based Network selection. This will be illustrated by simulation results.