• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.219-225
• /
• 2020

The directed energy deposition (DED) process of metal 3D printing technologies has been treated as an effective method for welding, repairing, and even 3-dimensional building of machinery parts. In this study, stainless steel 316L (STS316L) and Inconel 625 (IN625) alloy powders are additively manufactured using the DED process, and the microstructure of the fabricated STS316L/IN625 sample is investigated. In particular, there are no secondary phases in the interface between STS316L and the IN625 alloy. The EDS and Vickers hardness results clearly show compositionally and mechanically transient layers a few tens of micrometers in thickness. Interestingly, several cracks are only observed in the STS 316L rather than in the IN625 alloy near the interface. In addition, small-sized voids 200-400 nm in diameter that look like trapped pores are present in both materials. The cracks present near the interface are formed by tensile stress in STS316L caused by the difference in the CTE (coefficient of thermal expansion) between the two materials during the DED process. These results can provide fundamental information for the fabrication of machinery parts that require joining of two materials, such as valves.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권2호
• /
• pp.183-187
• /
• 2005

관상접근법 후 발생한 측두부 함몰의 기전은 아직 명확하지는 않으나 중측두동맥의 손상에 의한 측두지방대의 소실과 변위, 측두근의 부피감소, 봉합시의 잘못된 위치에 의해 발생된다. 이에 저자등은 관상접근법 후 발생한 측두부 함몰을 빠른 혈관화와 골조직의 성장, 낮은 합병증을 보이는 $Medpor^{(R)}$를 이용하여 심미적인 개선을 얻을 수 있었고 이후 현재까지 양호한 경과를 보이기에 문헌고찰과 함께 보고하는 바 이다.

• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.281-289
• /
• 2016

The effect of nitrogen on the electrochemical corrosion and nanomechanical behaviors of martensitic stainless steel was examined using potentiodynamic polarization and nanoindentation test methods. The results indicate that partial replacement of carbon with nitrogen effectively improved the passivation and pitting corrosion resistance of conventional high-carbon and high- chromium martensitic steels. Post-test observation of the samples after a potentiodynamic test revealed a severe pitting attacks in conventional martensitic steel compared with nitrogen- containing martensitic stainless steel. This was shown to be due to (i) microstructural refinement results in retaining a high-chromium content in the matrix, and (ii) the presence of reversed austenite formed during the tempering process. Since nitrogen addition also resulted in the formation of a $Cr_2N$ phase as a process of secondary hardening, the hardness of the nitrogen- containing steel is slightly higher than the conventional martensitic stainless steel under tempered conditions, even though the carbon content is lowered. The added nitrogen also improved the wear resistance of the steel as the critical load (Lc2) is less, along with a lower scratch friction coefficient (SFC) when compared to conventional martensitic stainless steel such as AISI 440C.

• 한국자원식물학회지
• /
• 제15권3호
• /
• pp.285-292
• /
• 2002

도입 마(Dioscorea alate L.) 계통 중 품질이 우수하고 이 용 가치가 기대되는 열대산 마(D. alata)를 우리나라에서 재배 시 그 가능성과 제 기관의 생육특성을 밝히기 위하여 실시하였다 D. alata. 및 D. opposita의 생육패턴 및 수량성을 비교 도입 재배 가능성을 시험하였다. 1. 4월 하순에 정식한 마의 지상부는 70일까지는 완만한 생육을 보였으나, 그후에 급격히 생장하여, 200일 이후 지상부의 하부가 낙엽지며 감소하였다. 생육은 D. atara, 단마 순이였다. 2. 도입마(D. alate)의 형성은 정식 50일 정도에서 일어났으나, 그 후 비대생장이 늦어서 150일 이후에 급격 히 비대하였다. 3. D. alata(도입마)의 일반성분은 D. opposita(단가) 보다 단백질, 섬유, 지방의 함량이 낮았다. 4. D. alata의 경도를 보면 2696.2로 D. opposita 4946.9 보다 약 2배정도 낮고, 색도 중 명도(L)는 D. alata가 73.99으로 D. opposite 보다 높았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.170-170
• /
• 2000

Synthetic polymers such as polyimide, polycarbonate, and poly(methyl methacrylate) are long chain molecules which consist of carbon, hydrogen, and heteroatom linked together chemically. Recently, polymer surface can be modified by using a high energy ion beam process. High energy ions are introduced into polymer structure with high velocity and provide a high degree of chemical bonding between molecular chains. In high energy beam process the modified polymers have the highly crosslinked three-dimensionally connected rigid network structure and they showed significant improvements in electrical conductivity, in hardness and in resistance to wear and chemicals. Polyimide films (Kapton, types HN) with thickness of 50~100${\mu}{\textrm}{m}$ were used for investigations. They were treated with two different surface modification techniques: Plasma Source Ion Implantation (PSII) and conventional Ion Implantation. Polyimide films were implanted with different ion species such as Ar+, N+, C+, He+, and O+ with dose from 1 x 1015 to 1 x 1017 ions/cm2. Ion energy was varied from 10keV to 60keV for PSII experiment. Polyimide samples were also implanted with 1 MeV hydrogen, oxygen, nitrogen ions with a dose of 1x1015ions/cm2. This work provides the possibility for inducing conductivity in polyimide films by ion beam bombardment in the keloelectronvolt to megaelectronvolt energy range. The electrical properties of implanted polyimide were determined by four-point probe measurement. Depending on ion energy, doses, and ion type, the surface resistivity of the film is reduced by several orders of magnitude. Ion bombarded layers were characterized by Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS), XPS, and SEM.

• 열처리공학회지
• /
• 제36권3호
• /
• pp.128-136
• /
• 2023

In this study, the effects of heat treatment on the nano-scale creep behavior of CoCrFeMnNi high-entropy alloy (HEA) processed by high-pressure torsion (HPT) was investigated through nanoindentation technique. Nanoindentation experiments with a Berkovich indenter were performed on HPT-processed alloy subjected to heat treatment at 450℃, revealing that the hardness of the HPT-processed alloy (HPT sample) significantly increased with the heat treatment time. The heat treatment-induced microstructural change in HPT-processed alloy was analyzed using transmission electron microscopy, which showed the nano-sized Cr-, NiMn-, and FeCo-rich phases were formed in the HPT-processed alloy subjected to 10 hours of heat treatment (HPT+10A sample). To compare the creep behavior of HPT and HPT+10A samples, constant load nanoindentation creep experiments were performed using spherical indentation indenters with two different radii. It was revealed that the predominant mechanism for creep highly depended on the applied stress level. At low stress level, both HPT and HPT+10A samples were dominated by Coble creep. At high stress level, however, the mechanism transformed to dislocation creep for HPT sample, but continued to be Coble creep for HPT+10A sample, leading to higher creep resistance in the HPT+10A sample.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1019-1024
• /
• 2023

Ceramic materials have excellent material properties such as stability at high temperatures, chemical stability, corrosion resistance, and wear resistance, so they are applicable even in extreme environments of high temperature and pressure. In particular, silicon carbide can be applied in the field of structural ceramics due to its characteristics of high strength, hardness, corrosion resistance, and heat resistance even at high temperatures. In this study, considering the application of silicon carbide materials to next-generation turbines, silicon carbide materials were manufactured using a liquid phase sintering method. When manufacturing liquid phase sintered silicon carbide, sintering additives were added to lower the sintering temperature and densify the material. In Al₂O₃-SiO₂, it was confirmed that the secondary product of the sintering additive was observed as a slightly dark area and was evenly distributed overall, and the fracture surface of Al₂O₃-SiO₂ was in the form of transgranular fracture in which cracks progressed along the crystal plane, and the flexural strength for Al₂O₃-SiO₂ was about 445.6 MPa.

• Journal of Animal Science and Technology
• /
• 제65권5호
• /
• pp.1065-1080
• /
• 2023

The solubility and structure of myosin and the properties of pork gel with NaCl, KCl, CaCl₂, and MgCl₂ were investigated. Myofibrillar proteins (MPs) with phosphate were more solubilized with NaCl than with KCl (p < 0.05). CaCl₂ and MgCl₂ showed lower MP solubilities than those of NaCl and KCl (p < 0.05). The α-helix content of myosin was lower in KCl, CaCl₂, and MgCl₂ than in NaCl (p < 0.05). The pH of pork batter decreased in the order of KCl, NaCl, MgCl₂, and CaCl₂ (p < 0.05). The cooking yield of the pork gel manufactured with monovalent salts was higher than that of the pork gel manufactured with divalent salts (p < 0.05). The pork gel manufactured with KCl and MgCl₂ showed lower hardness than that of the pork gel manufactured with NaCl. The solubility and structure of myosin were different with the different chloride salts and those led the different quality properties of pork gel. Therefore, the results of this study can be helpful for understanding the quality properties of low-slat meat products manufactured by replacing sodium chloride with different chloride salts.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.395-403
• /
• 2006

[ $MgAl_2O_4$ ] 막은 MgO 보호막 보다 단단하며 수분 흡착 오염 문제에 상당히 강한 특성을 가진다. 본 연구에서 AC-PDP 의 유전체보호막으로 사용되는 MgO 보호막의 특성을 개선하기 위해 $MgAl_2O_4/MgO$ 이중층 보호막을 제작하여 특성을 조사하였다. 전자빔 증착기를 사용하여 Cu 기판에 MgO 와 $MgAl_2O_4$을 각각 $1000\AA$ 두께로 증착, $MgAl_2O_4/MgO$ 을 $200/800\AA$ 두께로 적층 증착 후, 이온빔에 의한 충전현상을 제거하기 위해 Al 을 $1000\AA$ 두께로 증착하였다. 집속 이온빔 (focused ion beam: FIB) 장치를 이용하여 10 kV 에서 14 kV 까지 이온빔 에너지에 따라 MgO는 $0.364{\sim}0.449$ 값의 스퍼터링 수율에서 $MgAl_2O_4/MgO$ 을 적층함으로 $24{\sim}30 %$ 낮아진 $0.244{\sim}0.357$ 값의 스퍼터링 수율이 측정되었으며, $MgAl_2O_4$는 가장 낮은 $0.088{\sim}0.109$ 값의 스퍼터링 수율이 측정되었다. g-집속이온빔 (g-FIB) 장치를 이용하여 $Ne^+$ 이온 에너지를 50 V 에서 200 V 까지 변화시켜 $MgAl_2O_4/MgO$ 와 MgO 는 $0.09{\sim}0.12$의 비슷한 이차 전자방출 계수를 측정하였다. AC- PDP 셀의 72 시간 열화실험 후 SEM 및 AFM으로 열화된 보호막의 표면을 관찰하여 기존의 단일 MgO 보호막과 $MgAl_2O_4/MgO$의 적층보호막의 열화특성을 살펴보았다.

• 한국포장학회지
• /
• 제21권2호
• /
• pp.73-78
• /
• 2015

단감은 수확 전 저온에 노출되는 경우가 종종 발생하며, 저온에 노출된 단감은 수확 후 저장 품질이 저하될 우려가 있다. 본 연구는 수확시기별 단감 과원의 기온이 '부유' 단감의 저장 품질에 미치는 영향을 조사하였다. 10월 중순에서 11월 중순 사이에 단감 과원의 기온변화를 관찰한 결과, 단감의 동상해를 유발하는 온도의 $-2.1^{\circ}C$ 이하의 저온이 과수원에 5회 내습하였으며, 그 중 11월 19일 $-5.4^{\circ}C$로써 수확기 중 가장 낮은 기온을 기록하였다. $0^{\circ}C$의 저장고에서 150일 저장하는 동안, 세 처리구 중 3차 수확단감은 1, 2차와 비교하여 지속적으로 높은 a값을 유지하였지만 L값과 경도는 감소함에 따라서 이는 동상해 피해 증상으로 인한 품질저하로 판단된다. 반면에, 1차 수확단감은 저장기간 중 a값의 증가와 높은 경도를 일정하게 유지하여 수확 후 저장 중 후숙에 의한 변화로 보였다. 또한, 유리당 함량 변화에서 1, 2차 수확단감은 fructose, glucose 및 sucrose 모두 비슷한 수준을 유지하는 반면에 3차 수확단감은 fructose와 glucose 증가 및 sucrose 감소하는 경향을 보여주었다. 결론적으로, 기온저하가 급작스럽게 발생할 수 있는 11월 중순은 수확 및 저장 과실 품질 저하를 유도할 수 있어 적합하지 않는 시기이므로, 이 시기 전에 수확을 완료할 수 있도록 수확시기를 결정하는 것이 적합한 것으로 사료된다.