• Composites Research
• /
• 제15권3호
• /
• pp.18-29
• /
• 2002

본 논문에서는 얇은 벽보로 모델링 한 위성체 구조물에 입사되는 열 하중에 의해 발생하는 굽힘 진동과 열적 플러터에 대하여 연구하였다. 복합재료 얇은 벽보는 회전관성과 1차, 2차 와핑, 전단변형의 비고전적 요소를 포함한다. CUS구조물로 모델링한 복합재료 얇은 벽보의 열 진동 특성은 적층 순서와 섬유강화복합재료의 방향특성인자로부터 기인된 종방향 굽힘과 횡방향 굽힘의 언성과 관련하여 연구되었다. 수치 해석적인 방법으로 열적 플러터의 안정성 영역의경계값을 구하였으며, 태양 열 플럭스의 입사각, 감쇠계수, 섬유각의 변화에 의한 보의 변위를 구하였다. 주 구조물에 압전소자를 부착하여, 감지기와 작동기로 사용하여 제어해석을 수행하였다.

• 한국진공학회지
• /
• 제6권4호
• /
• pp.321-325
• /
• 1997

LCD용 칼라 필터를 제작하는 방법으로 감광성 고분자(photosensitive polymer)에 광 리소그라피(photolithography)기술이 많이 이용되어지고 있다. 이로 인해 감광성 고분자 표 면의 물리적, 화학적 성질이 변하게 되는데, 이는 후속 공정인 플라즈마 식각이나 ITO 전극 의 증착 등에도 많은 영향을 주므로, 각 공정에 따른 이들 고분자의 표면 연구는 매우 중요 하다. 본 논문에서는 blue 칼라 필터의 고분자 표면에 대한 연구를 SIMS와 XPS를 이용하 여 수행하였으며, 표면의 거칠기 변화를 AFM을 통해 관찰하였다. SIMS와 XPS결과로부터 초기 공정인 blue 칼라 필터를 스핀 코팅하고 pre bake한 상태에서는 주로 칼라 필터의 주 성분인 단량체와 결합제의 고분자 물질이 표면에 드러나 있다가, 노광 과정을 거치고 post bake한 시료에서는 색깔을 내는 안료 성분이 표면에 드러남을 확인하였고, AFM을 통해서 는 post bake후에 표면에 더 거칠어 짐을 관찰하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.551-555
• /
• 2004

The two-transformer full bridge (TTFB) PWM converter has two transformers which act as the output inductor as well as the main transformer, i.e. as the forward and the flyback transformer. Although the doubled leakage inductor of the TTFB makes it easier to achieve the zero-voltage switching (ZVS) of the lagging leg switch along the wide load range, it instigates a serious voltage ringing in the secondary rectifier diodes, which would require the dissipative snubber circuit, cause the serious power dissipation, and increase the voltage stress across those diodes. To overcome these problems, a, new lossless diode-clamp rectifier (LDCR) is employed as the output rectifier, which helps the voltage across rectifier diodes to be clamped on a half the output voltage $(V_o/2)$ or the output voltage $(V_o)$. Therefore, no dissipative snubber for rectifier diodes is needed and a high efficiency as well as low noise output voltage can be realized. The operations, analysis and design consideration of proposed converter are presented in this paper. To verify the validity of the proposed converter, experimental results from a 425W, 385-170Vdc prototype for the plasma display panel (PDP) sustaining power module (PSPM) are presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.167-170
• /
• 1995

LiCoO$_2$is a electrode material of Li ion Cell which is expected as the cell with a very high electric charge density. The recent study is mainly to focused on a high power secondary cell. If very thin Li ion Cell can be made in the scale of IC substrate it can be a electric souse in IC chip , micro machine or very thin electrical display etc. LiCoO$_2$thin film can be made by CVD, Laser ablation, E-Beam, ton Beam process, sputtering etc. But to make the material with a high quality for a cell is difficult as the electrode in cell have the fitable ratio in components and a lattice structure of bulk etc. In this study, LiCoO$_2$is made by R.F magnetron sputtering with the variance of substrate temperature and oxygen partial pressure etc. In the substrate temperature of 600$^{\circ}C$ and the oxygen rate of 10%, we can acquire the good thin film LiCoO$_2$compared wish a bulk material.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권2호
• /
• pp.105-121
• /
• 2017

Purpose It is a major goal to improve the product yields during production operations in the manufacturing industry. Therefore, factory is trying to keep the good quality materials and proper production resources, also find the proper condition of facilities and manufacturing environment for yields improvement. Design/methodology/approach We propose the hybrid framework to analyze to dataset extracted from MES. Those data is about the alarm information generated from equipment, both measurement and equipment process value from production and cycle/pitch time measured from production data these covered products during production. We adapt a data warehousing techniques for organizing dataset, a logistic regression for finding out the significant factors, and a association analysis for drawing the rules which affect the product yields. And then we validate the framework by applying the real data generated from the discrete process in secondary cell battery manufacturing. Findings This paper deals with challenges to apply the full potential of modeling and simulation within CPPS(Cyber-Physical Production System) and Smart Factory implementation. The framework is being applied in one of the most advanced and complex industrial sectors like semiconductor, display, and automotive industry.

• 제어로봇시스템학회논문지
• /
• 제14권4호
• /
• pp.385-391
• /
• 2008

To effectively cope with a complexity of kinematic metrology due to workspace enlargement of the planar stage, the linear induction motor is suggested as its new driving source. Especially, the linear induction motor under uniform plate type of secondary doesn't inherently have a periodical force ripple which is generally shown in the brushless DC motor. But, it presents a poor transient characteristic at zero or low speed zone owing to time delay of flux settling, resulting in slow response. To improve the servo property of linear induction motor and apply successfully it to the precision stage, this paper discusses a modified vector control methodology. The controller has a novel input form, fixed d-axis current, q-axis current and forward-fed DC current, to control thrust force and normal force of the linear induction motor independently. Influence of the newly introduced input and the feasibility of controller are validated experimentally.

• 복식
• /
• 제52권2호
• /
• pp.19-30
• /
• 2002

This is the research of Abject Art which was originated aesthetically in Abjection Theory of Julia Kristeva, a french psycho-analyst who argued liberational discussions about feminine identity against patricentric ideology which had fastened existing beautiful and elegant oedipal-feminine image and femininity as the secondary sex or the other's sex. and which became known by the planning display at whitney Museum of American in 1993. In Julia Kristeva's Abjection Theory which was written in her book(Power of Horror : An Assay on Abjection, 1992), she named pre-oedipal stage in which there is no sexual difference and has the same significance to both sexes instead of the oedipal stage which is becoming male-supreme reality as the semiotic and reinterpreted that an infant disregards feminine body--mother's body (Julia Kristeva, named it as Chora) as the love and the pain which carries her baby in herself and creates the baby which belonged to herself--which belongs to the semiotic to enter the symbolic smoothly. So the Abjection art is partly consist of some works which express the concertion of the boundary rebated with infant Identity which is not yet the other perfectly nor the subject perfectly, and of some works called Excretory Arts which express the excretion and vomiting which is the original experience of the abject. I expect that this research can be the chance of breaking from the fastened identity which was granted on female and feminine costume in this masculine-view centric society and creating the new position of costume and dress in the field of art by analyzing the costumes especially among these works.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.625-627
• /
• 2002

MgO thin films were deposited on glass and (100) Si substrates by an Arc Ion Plating (AIP) equipment using a magnesium metal target at various oxygen gas flow. In this work, we investigated the relationship between the structural properties and the discharge characteristics of MgO coating layers. X-ray diffraction and AFM have been used to study behaviors of the structure and surface morphology. The optical transmittance and the ion induced secondary electron emission coefficient of the MgO films have been also measured. The resistivity of the deposited MgO films was gradually increased from 0.17 G ohm/${\square}$ to 0.35 G ohm/${\square}$ with the oxygen gas flow. The growth rate of the MgO coating layer was decreased with increasing the oxygen gas flow, while the optical transmittance was improved.

• 한국정보통신학회논문지
• /
• 제17권7호
• /
• pp.1583-1588
• /
• 2013

2008년 통계자료에 의하면 선박충돌로 인한 사고가 전체 사고의 약 25% 비율로 발생하고 있으며, 선박 사고는 단순 충돌사고 와는 다르게 환경오염 등의 2차 피해를 발생시킬 수가 있어 사고를 최소화하기 위한 항해사의 견시 업무의 중요성이 대두되고 있다. 본 연구의 목적은 줌, 회전, 틸트 기능을 가진 CCTV가 해당 선박을 자동 추적하여 CCTV 영상위에 항해 및 선박정보를 표시하기 위한 시스템을 구축하는데 있다. 본 연구 결과물을 통해 항해사는 CCTV 영상 기반의 실제 항만상황과 선박 정보를 함께 관리함으로써 안전한 선박의 항해를 유도하는데 도움이 될 것으로 기대된다.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.103-113
• /
• 2014

Hydrophobicity is the key concept to understand the role of water in protein folding, protein self-assembly, and protein-ligand interaction. Conventionally, hydrophobicity of amino acids in a protein has been argued based on hydrophobicity scales determined for individual free amino acids, assuming that those scales are unaltered when amino acids are embedded in a protein. Here, we investigate how the hydrophobicity of constituent amino acids depends on the protein context, in particular, on the total charge and secondary structures of a protein. To this end, we compute and analyze the hydration free energy - free energy change upon hydration quantifying the hydrophobicity - of three short proteins based on the integral-equation theory of liquids. We find that the hydration free energy of charged amino acids is significantly affected by the protein total charge and exhibits contrasting behavior depending on the protein net charge being positive or negative. We also observe that amino acids in the central ${\beta}$-strand sandwiched by ${\beta}$-sheets display more enhanced hydrophobicity than free amino acids, whereas those in the ${\alpha}$-helix do not clearly show such a tendency. Our results provide novel insights into the hydrophobicity of amino acids, and will be valuable for rationalizing and predicting the strength of water-mediated interaction involved in the biological activity of proteins.