• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.445-448
• /
• 2005

A new high efficiency phase shifted full bridge (PSFB) converter for sustaining power module of plasma display panel (PDP) is proposed in this paper .The proposed converter employs the rectifier of voltage doubler type without output inductor. Since it has no output inductor, the voltage stresses of the secondary rectifier diodes can be clamped at the level of the output voltage. Therefore, no dissipative resistor-capacitor (RC) snubber for rectifier diodes is needed and a high efficiency as well as low noise cutout voltage can be realized. In addition, due to elimination of the large output inductor, it features a simple structure, lower cost, less mass, and lighter weight. Furthermore, the proposed converter has wide zero voltage switching (ZVS ) ranges with low current stresses of the primary switches. Also the resonance between the leakage inductor of the transformer and the capacitor of the voltage doubler cell makes the current stresses of the primary switches and rectifier diodes reduced. In this paper, the operational principles, analysis of the proposed converter, and the experimental results are presented.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.2 s.11
• /
• pp.39-43
• /
• 2005

In the study, in order to deposit TaN thin film for diffusion barrier and bottom electrode we made the Plasma Assisted ALD equipment and confirmed the electrical characteristics of TaN thin films grown PAALD method. Plasma Assisted ALD equipment depositing TaN thin film using PEMAT(pentakis(ethylmethlyamino) tantalum) precursor and NH3 reaction gas is shown that TaN thin film deposited high density and amorphous phase with XRD measurement. The degree of diffusion and reaction taking place in Cu/TaN (deposited using 150W PAALD)/$SiO_{2}$/Si systems with increasing annealing temperature was estimated for MOS capacitor property and the $SiO_{2}$, (600${\AA}$)/Si system surface analysis by C-V measurement and secondary ion material spectrometer (SIMS) after Cu/TaN/$SiO_{2}$ (400 ${\AA}$) layer etching. TaN thin film deposited PAALD method diffusion barrier have a good diffusion barrier property up to 500$^{\circ}C$.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.28-32
• /
• 2023

Recently, the use of stable lithium nanostructures as substrates and electrodes for secondary batteries can be a fundamental alternative to the development of next-generation system semiconductor devices. However, lithium structures pose safety concerns by severely limiting battery life due to the growth of Li dendrites during rapid charge/discharge cycles. Also, enabling long cyclability of high-voltage oxide cathodes is a persistent challenge for all-solid-state batteries, largely because of their poor interfacial stabilities against oxide solid electrolytes. For the development of next-generation system semiconductor devices, solid electrolyte nanostructures, which are used in high-density micro-energy storage devices and avoid the instability of liquid electrolytes, can be promising alternatives for next-generation batteries. Nevertheless, poor lithium ion conductivity and structural defects at room temperature have been pointed out as limitations. In this study, a low-dimensional Graphene Oxide (GO) structure was applied to demonstrate stable operation characteristics based on Li+ ion conductivity and excellent electrochemical performance. The low-dimensional structure of GO-based solid electrolytes can provide an important strategy for stable scalable solid-state power system semiconductor applications at room temperature. The device using uncoated bare NCA delivers a low capacity of 89 mA h g-1, while the cell using GO-coated NCA delivers a high capacity of 158 mA h g−1 and a low polarization. A full Li GO-based device was fabricated to demonstrate the practicality of the modified Li structure using the Li-GO heterointerface. This study promises that the lowdimensional structure of Li-GO can be an effective approach for the stabilization of solid-state power system semiconductor architectures.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.32-37
• /
• 2023

For the potential applications in large-area OLED lightings, hydrogen fuel cells, and secondary batteries, we have performed an intermittent coating of high-viscosity polydimethylsiloxane using roll-to-roll slot die coater. During intermittent coating, dead zones inevitably appear where the thickness of PDMS patch films becomes non-uniform, especially at the leading/trailing edge. To reduce it, we have coated the PDMS patches by varying the process parameters such as the installation angle of the slot die head, coating speed, and patch interval. It is observed that the PDMS solution flows down and thus the thickness profile is non-uniform for horizonal intermittent coating, whereas the PDMS solution remaining on the head lip causes an increase in the PDMS thickness at the leading/trailing edges for vertical intermittent coating when the coating velocity is low. As the coating speed increases, however, the dead zone is shown to be reduced. It is addressed that the overall dead zone (the dead zone at the leading edge + the dead zone at the trailing edge) is smaller with horizontal intermittent coating than with vertical intermittent coating.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.130-135
• /
• 2023

Plasma-resistant ceramic (PRC) is a material used to prevent internal damage in plasma processing equipment for semiconductors and displays. The challenge is to suppress particles falling off from damaged surfaces and increase retention time in order to improve productivity and introduce the latest miniaturization process. Here, we confirmed the effect of suppressing plasma deterioration and reducing the etch rate through surface treatment of existing PRC with an initial illumination level of 200 nm. In particular, quartz glass showed a decrease in etch rate of up to 10%. Furthermore, it is believed that micro-scale secondary particles formed on the microstructure of each material grow as crystals during the fluoridation process. This is a factor that can act as a killer defect when dropped, and is an essential consideration when analyzing plasma resistance. The plasma etching suppression effect of the initial illumination is thought to be due to partial over etching at the dihedral angle of the material due to the sputtering of re-emission of Ar+-based cations. This means that plasma damage due to densification can also be interpreted in existing PRC studies. The research results are significant in that they present surface treatment conditions that can be directly applied to existing PRC for mass production and a new perspective to analyze plasma resistance in addition to simple etching rates.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.696-700
• /
• 2012

(Na, K) $NbO_3$ thick film was successfully achieved using a sol-gel coating process with the addition of polyvinylpyrrolidone (PVP) to a metal alkoxide solution. The transparent coating solution, mixed with Nb:PVP = 1:1 in a molar ration, was synthesized by evaporating the solvent to over 62.5 wt%. Additive PVP increased the viscosity of the solution so that the coating thickness could be enhanced. The thickness of the (Na, K) $NbO_3$ film assisted by PVP was ca. 320 nm at the time of deposition; this value is four times thicker than that of the sample fabricated without PVP. Also, due to PVP binding with the OH groups of the metal alkoxide, the condensation reaction in the film was suppressed. The crystalline size of the (Na, K) $NbO_3$ films assisted by PVP was ca. 15 nm smaller than that of the film fabricated without PVP. After the sintering process at $700^{\circ}C$, the (Na, K) $NbO_3$ films were mainly composed of randomly oriented (Na, K) $NbO_3$ phase of perovskite crystal structure, including a somewhat secondary phase of $K_2Nb_4O_{11}$. However, by adding PVP, the content of the secondary phase became quite smaller than that of the sample without PVP. It was thought that the addition of PVP might have the effect of restraining the loss of potassium and that PVP could hold metalloxane by strong hydrogen bonding before complete decomposition. Therefore, the film thickness of the (Na, K) $NbO_3$ films could be considerably advanced and made more crack-free by the addition of PVP.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.12-17
• /
• 2007

The effects of the evaporation rate of MgO films using an electron beam on the MgO properties and the discharge characteristics of a plasma display panel(PDP) were investigated and analyzed. Mgo films were deposited with the various MgO evaporation rates. The MgO properties such as the crystal orientation, the surface roughness, and the film structure, were inspected using XRD(X-ray diffractometry), AFM(atomic force microscopy). From the experiments and Paschen law, the maximum value of the secondary, electron emission coefficient $(\gamma)$ was obtained at the evaporation rate of $5\AA/sec$. The minimum firing voltage and the maximum luminous efficiency were obtained at an evaporation rate of $5\AA/sec$. In the MgO film deposited at $5\AA/sec$, the (200) orientation and $F^+$ center were most intensive. The XRD results and cathode-luminescence(CL) spectra show the $\gamma$ values are correlated with $F/F^+$ centers of the molecular structure of MgO films.

• Journal of the Korean Society of School Health
• /
• v.3 no.2
• /
• pp.63-87
• /
• 1990

The purpose of this study was to investigate the performance rate of regular health instruction by school nurses and its related factors. These data were collected by questionnaire in Mar. 1990. Total 986 school nurses who have been working primary, secondary schools in Seoul were given the questionnaire, and 672 school nurses' respectively, were finally analyzed. Analysis of the data was done utilizing SPSS/PC+for percentage, frequency, mean, $X^2$-test, t-test, ANOVA, correlation, regression. The major findings of this study were as follows : 1. Thc performance rate of regular health instruction by school nurses was 77.7% of 552 respondents. 2. The school nurses in primary school(87.0%) were more likely to perform regular health instruction than the school nurses in secondary school (63.8%). 3. The teachers of regular health instruction were more likely to display favorable attitudes toward need of health instruction. The school level was not statistically significant(P>0.05). 4. The evidence from the data analysis supported the proposition that the teachers of regular health instruction had more positive attitude toward the establishment of health subject(80.3%). The school level was statistically significant(P<0.05). 5. The school principal was a highly significant factor as it affected the performance rate of regular health instruction by school nurses. The school level was statistically significant(P<0.001). 6. The length of past career, the degree of self confidence on health instruction, the need of health instruction did affect the performance rate of regular health instruction by school nurses. On the basis of the above mentioned, so as for regular health instruction of school to be activated more throughly, regular class must be introduced in the form of establishment of health subject, enhancement of quality on the part of school nurses, made and various methods for enhancing perception toward the regular health instruction on the part of school principal are to be carried out.

• Journal of the Korean Society of Earth Science Education
• /
• v.7 no.3
• /
• pp.303-312
• /
• 2014

In order to foster 'creative convergence talents' teachers and pre-service teachers who possess a certain degree of creativity must learn about this new approach as part of their teacher training. In this study, we attempted to identify the implications on the curriculum of the teacher education-training college in question by analysing secondary school teachers' and pre-service teachers' creativity and by collecting sufficient data to develop a positive feedback model for selecting, cultivating, and appointing pre-service teachers who fulfil the requirements of said college of education. Such teachers will display the commitment and professionalism to fulfil their teaching duties in the best possible manner and will consistently produce valuable contributions to their chosen subject matter and integrate these into their daily teaching. These teachers will complete all their tasks in a creative way, including student guidance, administrative duties, and academic lessons. The factors that distinguished creative teachers from others included originality and fluency. Our test group comprised 216 pre-service teachers as well as 137 fully qualified teachers. Teachers' understanding of the factors required in order to qualify as a 'creative and committed teacher' was very low. We provided data to the college of education to increase creativity when selecting teachers and curricula based on an analysis of perceptions of creativity provided by teachers and pre-service teachers.

• Journal of the Korean School Mathematics Society
• /
• v.19 no.4
• /
• pp.459-478
• /
• 2016

With the proven benefits of and increased interest in using technology in education, the role of teachers has become more important in integrating technology into mathematics classroom. Thus, it is important to improve preservice teachers' technological, pedagogical, and content knowledge (TPACK), which are influenced by their beliefs. This study examines how preservice secondary mathematics teachers' experience and beliefs related to technology use in the mathematics classrooms impact their TPACK. The results of this study show that preservice teachers who have more experience using technology and who hold student-centered beliefs towards technology use display higher levels of technology-related knowledge than preservice teachers who have little experience and who hold teacher-centered beliefs. Understanding the relationships between preservice teachers' TPACK and beliefs provides insights into how teacher education programs can support preservice teachers to develop TPACK and integrate technology into their future mathematics instruction.