• 대한토목학회논문집
• /
• 제26권5B호
• /
• pp.469-479
• /
• 2006

본 연구에서는 사행수로에서 주 흐름과 이차류의 특성을 정량적으로 분석하고자 중심각이 $150^{\circ}$이고 사행도 1.52인 S자형 사행수로에서 실험을 수행하였다. 평균수심과 유량을 달리하여 다양한 실험 조건 하에서 수행한 실험을 통해 다중 만곡부를 갖는 사행수로에서 이차류의 공간적 변화양상을 관찰하였다. 실험결과, 주 흐름은 실험조건에 관계없이 직선구간에서 좌우 대칭적인 유속분포를 보였고, 만곡부에서는 내안쪽에 최대유속이 발생하고 외안쪽에 최소유속이 발생하는 현상을 발견 할 수 있었다. 이렇게 주 흐름이 최단노선을 따라 발생하는 현상은 기존 연구자들의 결과와 일치하는 것이다. 이차류의 거동은 첫번째 만곡부보다 두 번째 만곡부에서 더욱 활발하게 발달하고 외안 회전류가 뚜렷히 나타남을 발견하였다. 이차류의 강도는 직선구간에서는 낮게 나타나고 만곡부에서는 증가하는 주기적인 현상을 보였으며, 만곡부의 이차류 강도가 직선구간보다 2~3배 크게 나타났다. 또한, 두 번째 만곡부에서 이차류 강도의 최대값이 발생했다. 주 흐름방향의 난류 강도와 Reynolds 전단응력을 분석한 결과, 주 흐름 난류 강도는 주 흐름의 유속편차가 클수록 증가하는 것으로 나타났고 Reynolds 전단응력은 주 흐름방향 유속의 편차가 크게 벌어지는 동시에 이차류가 활발히 생성되는 지점에서 크게 나타나는 경향을 보였다.

• 한국수자원학회논문집
• /
• 제37권7호
• /
• pp.527-540
• /
• 2004

다중 만곡부에서의 주흐름과 이차류의 흐름 특성을 분석하기 위하여 중심각 120$^{\circ}$인 두 개의 만곡부로 이루어진 사행수로에서 실험을 수행하였다. 실험수로의 횡단면은 직사각형과 곡선형 두 가지 형태로 제작하였으며, 곡선형 단면 형상 결정에는 베타함수를 이용하였다. 3차원 유속장의 측정은 micro-ADV를 이용하였다. 실험결과, 직사각형 수로에서 주흐름은 수로의 가장 짧은 경로를 따라 발생하였으며, 이는 기존 연구자들의 결과와 일치한다. 곡선형 수로에서도 주흐름이 직사각형 수로에서의 주흐름의 거동과 비슷한 양상을 보이는 것으로 밝혀졌다. 곡선형 수로에서의 실험결과가 실제 자연하천의 만곡부에서의 주흐름 거동(최심선을 따라 발생)과 상이하게 나타나는 이유는 실험수로의 바닥 조도와 사행도에 기인한 것으로 사료된다. 이차류의 정량적인 분석을 위하여 흐름함수를 도입한 결과, 만곡부에서 주 셀 뿐만 아니라 바깥제방 셀의 위치 및 형태를 확인할 수 있었다. 또한 이차류 강도를 계산한 결과, 직사각형 및 곡선형 수로에서 최대값은 두 번째 만곡부의 정점 부근에서 가장 크게 나타나며 곡선형 수로의 이차류의 강도가 직사각형 수로의 값보다 크게 나타나고 있음을 알 수 있었다. 직사각형 수로의 경우, 하폭 대 수심비가 커질수록 이차류의 강도가 증가하고 있음을 확인하였다.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.240-249
• /
• 1994

The basic experiments for designing the effective gas turbine combustor were performed. There are several factors that define the characteristics of gas turbine combustor. Among them, experiment was focused on swirl effects by three types of swirler with different swirl numbers(0.0, 0.38, and 0.62). Particularly, an interest was concentrated on primary zone where the flame characteristics of total combustor was dominated strongly and secondary zone where the remaining unburned gas was reacted again or cooling effect was done according to degree of swirl intensity. For this study, following measurements have been carried out, that is, time mean and fluctuating temperature, exhaust gas composition including NO concentration, and ion current. From this study, it was found that swirl intensity affects largely not only flame style but also emission formation, furthermore that it is important to select proper swirl intensity.

• Earthquakes and Structures
• /
• 제4권1호
• /
• pp.109-132
• /
• 2013

Current codes incorporate simplified methods for the prediction of acceleration demands on secondary structural and non-structural elements at different levels of a building. While the use of simple analysis methods should be advocated, damage to both secondary structural and non-structural elements in recent earthquakes have highlighted the need for improved design procedures for such elements. In order to take a step towards the formation of accurate but simplified methods of predicting floor spectra, this work examines the floor spectra on elastic and inelastic single-degree of freedom systems subject to accelerograms of varying seismic intensity. After identifying the factors that appear to affect the shape and intensity of acceleration demands on secondary structural and non-structural elements, a new series of calibrated equations are proposed to predict floor spectra on single degree of freedom supporting structures. The approach uses concepts of dynamics and inelasticity to define the shape and intensity of the floor spectra at different levels of damping. The results of non-linear time-history analyses of a series of single-degree of freedom supporting structures indicate that the new methodology is very promising. Future research will aim to extend the methodology to multi-degree of freedom supporting structures and run additional verification studies.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.70-77
• /
• 2007

The application of focused ion beam(FIB) technology has been broadened in the fabrication of nanoscale regime. The extended application of FIB is dependent on complicated reciprocal relation of operating parameters. It is necessary for successful and efficient modifications on the surface of silicon substrate. The primary effect by Gaussian beam intensity is significantly shown from various aperture size, accelerating voltage, and beam current. Also, the secondary effect of other process factors - dwell time, pixel interval, scan mode, and pattern size has affected to etching results. For the process analysis, influence of the secondary factors on FIB micromilling process is examined with respect to sputtering depth during the milling process in silicon material. The results are analyzed by the ratio of signal to noise obtained using design of experiment in each parameter.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.9-16
• /
• 2014

The electronic ballast for HID lamps needs high ignition voltage which is consisted of high voltage pulse ignitor. However, In the case of street lamp it is far from a lamp to a ballast, the conventional pulsed high voltage ignitor can not turn on the HID lamps because of reduction of ignition voltage. Therefore, it needs to do the research on a resonant ignition to turn on the HID lamps. However, the resonant circuit which is consisted of LC occurs over current, so the capacity of the ignitor increases. The capacity of the ignitor can be reduced by using the transformer. In this case, the capacitor for resonance is installed to the secondary of the transformer, and the capacitor needs high withstanding voltage. Therefore, it needs to do the research on a resonant ignition to reduce the voltage over the resonant capacitor by dividing the secondary of the transformer.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1267-1269
• /
• 2010

The pure crystalline $Li_{1.1}V_{0.9}O_2$ powder has been prepared by a simple solid state reaction of $Li_2CO_3$ and $V_2O_3$ precursors under nitrogen gas containing 10 mol % hydrogen gas flow. The structure of $Li_{1.1}V_{0.9}O_2$ powder was analyzed using Xray diffraction (XRD) and scanning electron microscope (SEM). The stoichiometric $Li_{1.1}V_{0.9}O_2$ powder was used as anode active material for lithium secondary batteries. Its electrochemical properties were investigated by cyclic voltammetry and constant current methods using lithium foil electrode. The observed specific discharge capacity and charge capacity were 360 mAh/g and 260 mAh/g during the first cycle, respectively. In addition, the cyclic efficiency of this cell was 72.2% in the first cycle. The specific capacity of $Li_{1.1}V_{0.9}O_2$ anode rapidly declines as the current rate increases and retains only 30 % of the capacity of 0.1C rate at 1C rate. The crystallinity of the $Li_{1.1}V_{0.9}O_2$ anode decrease as discharge reaction proceeds. However, the relative intensity of main peaks was almost recovered when the cell was charged up to 1.5 V.

• 대한물리의학회지
• /
• 제15권1호
• /
• pp.25-32
• /
• 2020

PURPOSE: This study examined the efficacy of an interferential current (IFC) treatment on the improvement of pain, disability, and quality of life in stroke patients with lumbago. METHODS: A double-blind, randomized clinical trial was conducted on 40 stroke patients with lumbago. The patients were allocated randomly into two groups: the IFC treatment group (n= 20) and the placebo treatment group (n= 20). The IFC group received 30 minutes of IFC treatment on the lumbar region, while the placebo group received IFC treatment but without real electrical stimulation. The intervention was administered five days a week for four weeks. The primary outcomes of pain intensity were measured using a visual analogue scale. The secondary measurements included the Barthel Index, Oswestry Disability Index (ODI), and health-related quality of life (HRQoL). RESULTS: The measurements were conducted before and after the two-week intervention period. Compared to the placebo treatment group, the IFC treatment group showed significantly greater improvement in the pain intensity (p<.05), ODI (p<.05), and SF-36 (p<.05) at the end of the intervention. No significant differences in the Barthel Index were found between the two groups. CONCLUSION: These findings show that an IFC treatment can improve pain, functional ability, and quality of life, highlighting the benefits of somatosensory stimulation from IFC in stroke patients with lumbago.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.891-899
• /
• 1996

A model for predicting the characteristics of elastic ferromagnetic materials having a moving gap was presented. Based on the model parameters concerning behavior of material, such as the instantaneous field intensity, attractive force between the poles, length of gap, and the induced current/ emf in the circuit can be determined from the numerical integrations of the governing equations derived. From the results of the model it is found that when dc emf is imposed on the circuit the current sharply rise and fall for very short duration then stabilize at extremely low level which depends mainly on elasticity, permeabilities and ratio of resistivity. Subsequently output emf is shown stabilized at constant value which depends on the previous parameters as well as the resistivity ratio of primary to secondary circuit after sufficient progress of time.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.233-238
• /
• 2017

In this paper we propose a freeform secondary lens for an LED fishing/working lamp (LFWL). This innovative LED lamp is used to replace the traditional HID fishing lamp, to satisfy the lighting demands of fishing and the on-board activities on fishing boats. To realize the freeform lens's geometry, Gaussian decomposition is involved in our optics-design process for approaching the targeted light intensity distribution curve (LIDC) of the LFWL lens. The simulated results show that the illumination on the deck, on the sea's surface, and underwater shows only small differences between LED fishing/working lamps and HID fishing lamps. Meanwhile, a lighting efficiency of 91% with just one third of the power consumption can be achieved, when the proposed LED fishing/working lamps are used instead of HID fishing lamps.