• 지식경영연구
• /
• 제19권2호
• /
• pp.109-132
• /
• 2018

Recently, new financial services related to FinTech has gained attention more and more. Online P2P financial services transactions such as FinTech require careful examination of the constituents of information systems as an investment is made based on the information presented on the online platform without direct face-to-face contact. The purpose of this study is to find out the success factors of online P2P Lending service among FinTech. To serve the purpose, we build IS (information system) success model, and then use Kano model and fuzzy analytic hierarchy process (Fuzzy-AHP) to find out factors for the success of online P2P Lending service. In particular, this study uses Kano model to classify information system satisfaction factors and to calculate the satisfaction coefficient. The Kano model, however, has a drawback of evaluating single criterion. Therefore, we use multi-criteria decision-making technique such as Fuzzy-AHP to derive the relative importance of the factors. The analysis results show different results depending on the analysis technique. In the Kano model, most of the information system factors are a one-dimensional quality attribute. The satisfaction coefficient is highest for personalized service, followed by the responsiveness of service, ease of using a system, understanding of information, usefulness of information' reliability. The service reliability is the highest in dissatisfaction coefficient, followed by system security, service responsiveness, system stability, and personalized service. The results of the Fuzzy-AHP analysis shows that the usefulness of information quality, the personalization of service quality, and the security of system quality are the significant factors and the stability of system quality was a secondary factor.

• Journal of Astronomy and Space Sciences
• /
• 제23권3호
• /
• pp.177-188
• /
• 2006

소백산 천문대의 61cm 망원경과 2K CCD 카메라로 2003년 1월 6일부터 24일까지 5일간 WUMa형 접촉쌍성 V523 Cas를 측광판측하여 총 920개의 관측점(${\Delta}B$: 230점, ${\Delta}V$. 230점, ${\Delta}R$: 230점, ${\Delta}I$: 230점)을 얻었다. 우리의 관측점으로부터 9개의 새로운 극심시각(주극심: 5개, 부극심: 4개)을 산출하였다. 2004년도 Wilson-Devinney(WD) 쌍성 모형으로 우리가 얻은 새로운 BVRI 광도곡선과 Rucinski et al.(2003)의 시선속도 곡선을 결합하여 분석함으로서 V523 Cas의 제 물리요소를 새롭게 산출하였다. 광도곡선에 나타난 작은 비대칭을 온도가 높은 주성의 광구 표면에 차거운 흑점과 반성에 뜨거운 흑점을 가정하여 설명하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.1150-1158
• /
• 2009

현재 영상의학과에서 사용되는 촬영장비는 질환을 가지고 있는 환자와의 접촉이 불가피 하기 때문에 병원균이 존재 할 수밖에 없다. 따라서 영상의학과 촬영실에서의 세균 오염도를 측정하고, 검출된 세균들을 소독(물, Tissue Cleaner, 70% 알코올)하여 소독 전 후 세균의 감소율을 비교함으로써 병원감염예방에 있어 소독제 사용의 중요성과 병원감염관리의 인식을 높이고자 한다. 영상의학과 촬영실에서의 세균 오염도를 측정 하였을 때 여러 가지 세균들이 검출되었다. 영상의학과 촬영실내를 소독할 때 물이나 Tissue Cleaner, 환기 보다는 70% Alcohol을 사용하여 소독을 실시하는 것이 세균 사멸 및 병원감염 예방부분에 있어 효과적임을 알 수 있었다. 따라서 세균을 사멸시키기 위해 보다 좋은 소독제를 개발하여야 하며, 병원 내 각종 의료 장비는 언제나 오염될 가능성이 있으므로 기구에 대한 소독 및 멸균을 실시하여 병원감염으로 인해 환자에게 2차 감염을 유발되지 않도록 노력해야 할 것이다.

• 보건행정학회지
• /
• 제24권1호
• /
• pp.100-106
• /
• 2014

Background: There is no consensus on the definition of primary care in South Korea. This study's objective was to define the concept of primary care using a Delphi method. Methods: Three expert panels were formed, consisting of 16 primary care policy researchers, 45 stakeholders, and 16 primary care physicians. Three rounds of voting, using 9-point appropriateness scales, were conducted. The first round involved rating the appropriateness of 20 previously established attributes of primary care. In the second round, panelists received a summary of the first-round results and were asked to once again vote on the 10 undetermined attributes and the provisional definition. The final round involved voting on the appropriateness of the revised definition. The Korean Language Society reviewed the revised definition. Results: Four core (first-contact care, comprehensiveness, coordination, and longitudinality) and three ancillary (personalized care, family and community context, and community base) attributes were selected. The Korean definition of primary care was accomplished with all three panel groups arriving at a 'very good' level of consensus. Conclusion: The Korean definition of primary care will provide a framework for evaluating performance of primary care in South Korea. It will also contribute to resolving confusion about the concept of primary care.

• Applied Microscopy
• /
• 제25권3호
• /
• pp.63-74
• /
• 1995

The development of pale chub oocyte from the immature oogonium to mature oocyte was investigated by light and electron microscope. The cytoplasm of pale chub oogonia was acidic and many vesicles were located at inner side of nuclear membrane. In primary oocytes, yolk vesicles were distributed in cytoplasm. Also, fibrous materials and protuberances were distributed on the surface of zona radiata. The nucleus of secondary oocyte was enlarged and yolk vesicles in cytoplasm migrated to zona radiata. In early egg, yolk mass are formed and yolk vesicles were located at inner side of zona radiata. Three-layered zona radiata was about $3{\mu}m$ in thickness. The three layers were an outer fibrous material layer, a middle nurse cell layer in which microvilli of early egg cytoplasm contact with processes of nurse cells, and an inner layer with high electron density. In mature egg, euchromatin and a germinal vesicle were developed, mitochondria, free ribosomes, and yolk mass were distributed in cytoplasm. But, yolk vesicles were disappeared. Specially, zona radiata of matured eggs were better thin than the one of immature eggs In conclusion, it is summerized that the oogenesis of pale chub were the increase of cell size, the formation and accumulation of yolk, the decrease in nucleat electron density, changes of zona radiata, and the development of microvilli.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.188.1-188.1
• /
• 2014

Aluminum is widely used as a material for electrode on silicon based devices. Especially, aluminum films are used as backside and front-side electrodes in silicon quantum dot (QD) solar cells. In this point, the diffusion of aluminum is very important for the enhancement of power conversion efficiency by improvement of contact property. Aluminum was deposited on a Si (100) wafer and a Si QD layer by ion beam sputter system with a DC ion gun. The Si QD layer was fabricated by $1100^{\circ}C$ annealing of the $SiO_2/SiO_1$ multilayer film grown by ion beam sputtering deposition. Cs ion beam with a low energy and a grazing incidence angle was used in SIMS depth profiling analysis to obtain high depth resolution. Diffusion behavior of aluminum in the Al/Si and Al/Si QD interfaces was investigated by secondary ion mass spectrometry (SIMS) as a function of heat treatment temperature. It was found that aluminum is diffused into Si substrate at $450^{\circ}C$. In this presentation, the effect of heat treatment temperature and Si nitride diffusion barrier on the diffusion of Al will be discussed.

• 자원환경지질
• /
• 제3권4호
• /
• pp.199-222
• /
• 1970

One of the biggest sulfide metallic (Cu, Pb, Zn) ore deposits of South Korea is located in the area of Seo-myeon, Shiheung-gun, Gyeonggi-do. Geology of the region is mostly composed of metasediments of biotite schist, graphite schist, injection gneiss, sericite schist, limesilicate and quartzite from bottom, those are applicable to so-called Yeoncheon System of Pre-Cambrian, and granodiorite, quartz porphyry, basic dykes are outcroped in a small scope as intrusives. The origin of the ore deposit is pyrometasomatic contact deposits due to hydrothermal replacement and the ore bodies are imbedded in lower bed of limesilicate formation as impregnation and ore minerals are galena, sphalerite, marmatite, chalcopyrite, bornite, chalcocite, covellite, and the later two minerals are both hypogene and supergene. Gangue minerals are mostly skarn minerals those hornblende, diopside, epidote, hedenbergite, chlorite, garnet and quartz except primary calcite and quartz. Boundary plane (NS strike) between schists and limesilicate seemed to be primary opening of ore solution and fractures bearing $N50^{\circ}{\sim}80^{\circ}W$ are secondary structural control for localization of ore minerals and the third structural controls are both irregular gashes and schistosity in small scale. Photogeological study was carried with vertical aerial photo scaled 1: 38,000 and enlarged 1 : 10,000 under stereoscope. The study on the area convinced the fact that the geologic boundaries between rocks, limesilicates and quartzites, are traced easily by their typical topographic feature and drainage, and the main fracture patterns which derived from the result of fracture traces, that photogeologic lineament observed under stereoscope, are those bearing (1) $N20^{\circ}W$, (2) $N58^{\circ}W$, (3) $N76^{\circ}W$, (4) EW, (5) $N20^{\circ}W$, (6) $N62^{\circ}W$, (7) $N77^{\circ}W$. Among the written fractures, (5) (not schistosity, in case of fault) (6) (7) are post-mineral faults and others are pre-mineral faults and others are pre-mineral structures, and (2) (3) (6) (7) are coincided with statistical figure of 208 fractures surveyed in underground. By the result of the study, mineralized zone, are presumed to extend north and southward, total length about 4km.

• 한국산업보건학회지
• /
• 제30권3호
• /
• pp.256-269
• /
• 2020

Objectives: Everyone has been affected in some way by the COVID-19 pandemic, while some workers face threats to their health due to their jobs as well as worries about spreading the virus to intimate family members. With these concerns in mind, this study aims to identify occupations more vulnerable to COVID-19 and suggests the necessity of providing proper control measures against the risks in a timely manner in Korea. Methods: Daily briefing reports by the Korea Centers for Disease Control and Prevention (KCDC) were compiled (n=120) between January 20 and May 31, 2020. A total of 11,486 confirmed cases were included, which were sorted by occasion, area, and occupation. Among them, 2,411 cases were classified with specific occasions and/or areas of infection, while only 544 cases were determined with identifiable occupations. Guidelines for biological hazard management and COVID-19 guidelines for workplaces from domestic and international bodies were enlisted and compared. Results: It is unsurprising to find that healthcare professionals are experiencing the most immediate threat from COVID-19. In addition, service workers with face-to-face practices or indirect contact are also facing high risks. Religion facilities and eating places (dining, drinking bar, café, etc.,) follow. Guidelines and manuals for biological hazards are still lacking in Korea compared to the US and EU. Workplace manuals for managing COVID-19 are neither as comprehensive as the approaches of NIOSH's hierarchy of controls nor inclusive enough for minimizing secondary or tertiary suffering. Conclusions: The COVID-19 crisis is still ongoing and there is no doubt there will be more such events in the future. This analysis suggests that occupational health professionals, amid a pandemic including COVID-19, are urged to anticipate emerging risks related to all sorts of occupations, identify vulnerable workers and working environments, and plan and take actions to protect workers' health.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.238-239
• /
• 2010

Dimethyl sulphoxide (DMSO) is one of the widely-used secondary dopants in order to enhance the conductivity of poly(3, 4-ethylenedioxy-thiophene):poly(styrene sulfonate) (PEDOT:PSS) film. In this work, we investigated the effect of DMSO doping in to PEDOT:PSS on the electrical performance of the bulk heterojunction photovoltaics consisting of poly(3-hexylthiophene-2, 5-diyl) and phenyl-C61-butyric acid methyl ester. Correlation between the power conversion efficiency and the mechanism of improving conductivity, surface morphology, and contact properties was examined. The PEDOT:PSS films, which contain different concentration of DMSO, have been prepared and annealed at different annealing temperatures. The mixture of DMSO and PEDOT:PSS was prepared with a ratio of 1%, 5%, 15%, 25%, 35%, 45%, 55% by volume of DMSO, respectively. The DMSO-contained PEDOT:PSS solutions were stirred for 1hr at $40^{\circ}C$, then spin-coated on the ultra-sonicated glass. The spin-coated films were baked for 10min at $65^{\circ}C$, $85^{\circ}C$, and $120^{\circ}C$ in air. In order to investigate the electrical performance, P3HT:PCBM blended film was deposited with thickness of 150nm on DMSO-doped PEDOT:PSS layer. After depositing 100nm of Al, the device was post-annealed for 30min at $120^{\circ}C$ in vacuum. The fabricated cells, in this study, have been characterized by using several techniques such as UV-Visible spectrum, 4-point probe, J-V characteristics, and atomic force microscopy (AFM). The power conversion efficiency (AM 1.5G conditions) was increased from 0.91% to 2.35% by tuning DMSO doping ratio and annealing temperature. It is believed that the improved power conversion efficiency of the photovoltaics is attributed to the increased conductivity, leading to increasing short-circuit current in DMSO-doped PEDOT:PSS layer.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.285-291
• /
• 2016

There has been an accelerating increase in water reuse due to growing world population, rapid urbanization, and increasing scarcity of water resources. However, it is well recognized that water reuse practice is associated with many human health and ecological risks due to numerous chemicals and pathogenic microorganisms. Especially, the potential transmission of infectious disease by hundreds of pathogenic viruses in wastewater is one of the most serious human health risks associated with water reuse. In this study, we determined the response of different bacteriophages representing various bacteriophage groups to chlorination in real wastewater in order to identify a more reliable bacteriophage indicator system for chlorination in wastewater. Different bacteriophages were spiked into secondary effluents from wastewater plants from three different geographic areas, and then subjected to various doses of free chlorine and contact time at $5^{\circ}C$ in a bench-scale batch disinfection system. The inactivation of ${\phi}X174$ was relatively rapid and reached ~4 log10 with a CT value of 5 mg/L*min. On the other hand, the inactivation of bacteriophage PRD1 and MS2 were much slower than the one for ${\phi}X174$ and only ~1 log10 inactivation was achieved by a CT value of 10 mg/L*min. Overall, the results of this study suggest that bacteriophage both MS2 and PRD1 could be a reliable indicator for human pathogenic viruses for chlorination in wastewater treatment processes and water reuse practice.