• Geomechanics and Engineering
• /
• v.36 no.1
• /
• pp.51-69
• /
• 2024

Currently, composite lining mountain tunnels in China are generally classified based on the [BQ] method for the surrounding rock grade. Increasingly, tunnel field construction is replicated indoors for scale down model tests. However, the development of analogous materials for model tests of composite lining tunnels with different surrounding rock grades is still unclear. In this study, typical Class III and V surrounding rock analogous materials and corresponding composite lining support materials were developed. The whole processes of excavation-support dynamics of the mountain tunnels were simulated. Data on the variation of deformations, contact pressures and strains on the surrounding rock were obtained. Finally, a comparative analysis between model tests and numerical simulations was performed to verify the rationality of analogous material development. The following useful conclusions were obtained by analyzing the data from the tests. The main analogous materials of Class III surrounding rock are barite powder, high-strength gypsum and quartz sand with fly ash, quartz sand, anhydrous ethanol and rosin for Class V surrounding rock. Analogous materials for rockbolts, steel arches are replaced by aluminum bar and iron bar respectively with both shotcrete and secondary lining corresponding to gypsum and water. In addition, load release rate of Class V surrounding rock should be less than Class III surrounding rock. The fenestration level had large influence on the load sharing ratio of the secondary lining, with a difference of more than 30%, while the influence of the support time was smaller. The Sharing ratios of secondary lining in Class III surrounding rock do not exceed 12%, while those of Class V surrounding rock exceed 40%. The overall difference between the results of model tests and numerical simulations is small, which verifies the feasibility of similar material development in this study.

• Economic and Environmental Geology
• /
• v.7 no.3
• /
• pp.101-122
• /
• 1974

The study area is located in between Susanri and Hwanggangri where the formations of Okcheon group and Chosun group supposedly come in contact so that the area is structurally very import. Present study reveals that the meta-volcanic rocks distribute from south to north along contact zone of Okcheon and Chosun groups in the center of the area. Meta-volcanic rocks seem to be originated from the andesite or andesitic basalt rocks which was known to be Surchangri formation consist of phyllite and black slate by previous workers. The meta-volcanic rocks intruded along the fault zone one existed between Okcheon and Chosun groups but obliterated at present by the intrusion of volcanic rocks. The fault seems to be overthrust, and one of the positive evidences of thrust fault is the Yamisan nappe structure in Yamisan near Susanri. This interpretation coincides with O.J. Kim's work which states that the Precambrian Okcheon group is largely overturned and thrusted over the Chosun group. The relation between the Surchangri and the Majeonri formation marks facies change. This fact together with northpluging anticlinal structure made it possible that both formation came into contact along direction without fault. Yongam formation is not overlain unconformably used to be believed by previous workers, but interbed in the Great Limestone series of Chosun goup. It is also clarified that the rock formerly designated as limesilicate rock was meta-liparite. The origin of amphibole pebbles in the Kunjasan formation is of primary and secondary ones; the secondary pebbles were formed by metamorphism of the fragments of limestone or dolomite.

• Journal of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.41-50
• /
• 2006

We present the results of new multi-color CCD photometry for the contact binary XZ Leo, together with reasonable explanations for the period and light variations. Six new times of minimum light have been determined. A period study with all available timings confirms Qian's (2001) finding that the O-C residuals have varied secularly according to $dP/dt\;=\;+8.20{\times}10^{-8}\;d\;yr^{-l}$. This trend could be interpreted as a conservative mass transfer from the less massive cool secondary to the more massive hot primary in the system with a mass flow rate of about $5.37{\times}10^{-8}\;M_{\odot}\;yr^{-l}$. By simultaneous analysis of our light curves and the previously published radial-velocity data, a consistent set of light and velocity parameters for XZ Leo is obtained. The small differences between the observed and theoretical light curves are modelled by a blue third light and by a hot spot near the neck of the primary component. Our period study does not support the tertiary light but the hot region which may be formed by gas streams from the cool secondary. The solution indicates that XZ Leo is a deep contact binary with the values of q=0.343, $i=78^{\circ}.8$, ${\Delta}(T_1-T_2)=126\;K$, and f=33.6 %, differing much from those of Niarchos et al. (1994). Absolute parameters of XZ Leo are determined as follows: $M_1=1.84\;M_{\odot},\;M_2=0.63\;M_{\odot},\;R_1=1.75\;R_{\odot},\;R_2=1.10\;R_{\odot},\;L_1=7.19\;L_{\odot},\;and\;L_2=2.66\;L_{\odot}$.

• Herbal Formula Science
• /
• v.8 no.1
• /
• pp.257-279
• /
• 2000

Allergic contact dermatitis is a common skin disease resulting from specific immunologic to topically applied various allergen. After Dinitrochlorobenzene (DNCB) secondary sensitization, the ICR mice administered Rhemanniae radix extract (RRE) was observed to ascerstain the effect of RRE on allergic contact dermatitis. Purpose of this study was to investigate contact hypersensitivity assay, abdominal skin morphologic changes. Including mast cells and cell-surface glycoconjugates. The change of interleukin 2 (IL-2) receptor (CD25R). ICAM in abdominal skin, lymph node of inguinal region, and electro microscope-morphologic changes of abdominal skin. The results of this study were as follows: 1. The contact hypersensitivity assay, the ear swelling in the RRE had lesser probability than in the ACD Group. 2. In the general morphologic change of skin, hyperplasia of keratinocytes, distribution of vasculogenesis and epidermal lymphocytes infiltration were decreased in the RRE group compared with the ACD group. In epidermal basal layer and prickle layer, cell damage was decreased in the RRE group compared with the group painted with ACD. 3. MasT-cell in dermis was decreased in the RRE group compared with the group painted with DNCB. 4. Distribution of interlukin-2 Receptior positive cell and ICAM positive cell in dermis was decreased in the RRE Group compared with the ACD group. 5. Distribution of helper T-lymphocyte and cytotoxic T-lymphocite in inguinal nodes was decreased in the RRE group, and was observed well in paracortical area and cortical cord. 6. Distribution of apoptotic cell was appeared in the RRE group compared with the ACD group, in skin, dermis. in inguinal nodes, paracortical area observed well. With above results, the restarint of immunosuppression occuring in Allergic contact dermatitis is resulted in the slow progress the effect of Allergic contact dermatitis, and it is thought that ithis fact has a series of relation with apoptosis.

• Korean Journal of Social Welfare
• /
• v.68 no.1
• /
• pp.117-140
• /
• 2016

The purpose of this study is to explore in depth experience of child secondary victimization after sexual violence incident. In order to achieve this study goal, this study contact six child who experienced sexual abuse and acknowledged secondary victimization, and collected data by indepth interview about 2~4 times. collected data was analysed by Colaizzi's analysis method. The results of this study can draw six subcategories. Six subcategories are 'school to collapse protective device', 'family not to depend on' 'judicial authority to fester a wound' 'assailant to rub salt into a wound', and the people around him merely looked on. secondary victimization of child sex abuse victims signify experience to give menace such as huge blow after first victimization. Based on result of analysis, this study suggest and implication of social welfare to prevent Secondary Victimization of sexual violence victim child.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.216-223
• /
• 2006

The high efficiency full-bridge LLC resonant converter using a contact-less transformer Is proposed for the photovoltaic power generation system. For the series resonance with a series capacitor, the LLC resonant converter utilizes the leakage inductance and magnetizing inductance of a contact-less transformer Unlike the conventional series resonant converter operated to the continuous resonant current at above resonance frequency, the proposed converter operates to the discontinuous resonant current at the narrow frequency control range below resonance frequency. Due to the discontinuous mode resonant current, the proposed converter can be achieved the zero voltage switching (ZVS) in the primary switches and the zero current switching (ZCS) in the secondary rectification diodes without my auxiliary circuit. In this paper, the experimental results of the proposed full-bridge LLC resonant converter using a contact-less transformer are verified on the simulation based on the theoretical analysis and the 150W experimental prototype.

• Structural Engineering and Mechanics
• /
• v.76 no.2
• /
• pp.153-162
• /
• 2020

Aiming at the mechanical and structural characteristics of the contact zone composite rock, the shear tests and numerical studies were carried out. The effects of the differences in mechanical properties of different materials and the normal stress on shear properties of contact zone composite samples were analyzed from a macro-meso level. The results show that the composite samples have high shear strength, and the interface of different materials has strong adhesion. The differences in mechanical properties of materials weakens the shear strength and increase the shear brittleness of the sample, while normal stress will inhibit these effect. Under low/high normal stress, the sample show two failure modes, at the meso-damage level: elastic-shearing-frictional sliding and elastic-extrusion wear. This is mainly controlled by the contact and friction state of the material after damage. The secondary failure of undulating structure under normal-shear stress is the nature of extrusion wear, which is positively correlated to the normal stress and the degree of difference in mechanical properties of different materials. The increase of the mechanical difference of the sample will enhance the shear brittleness under lower normal stress and the shear interaction under higher normal stress.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.223-232
• /
• 2005

New BVR CCD light curves of the low mass ratio contact binaries, V410 Aur and V776 Cas, were observed with the 61 cm reflector and a 2K CCD camera at the Sobaeksan Astronomical Observatory. The absolute dimensions of the low mass ratio contact binaries, V410 Aur and V776 Cas, were obtained using WD program from the published spectroscopic and newly observed photometric data. The evolutionary status of this type of binary system including V410 Aur and V776 Cas has been considered. We reconfirmed that the primary stars of the low mass contact binary system were located on the TAMS and secondary stars were located under the ZAMS in H-R diagram.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.3
• /
• pp.189-198
• /
• 2006

We present newly observed BVRI CCD light curves for low mass ratio contact binaries, HN UMa and II UMa. The absolute dimensions of these objects were obtained by applying the Wilson-Devinney program to previously published spectroscopic analysis and to our observed photometric data. The evolutionary status of all 21 low mass ratio contact binary system including HN UMa and II UMa was then considered. The secondaries of all low mass ratio contact binaries are located below the zero age main sequence in HR diagram. This phenomenon could be explained by mass loss from the secondary component in the low mass contact binary system because even small mass loss affects luminosity decrease in the low mass stars.

• Journal of Astronomy and Space Sciences
• /
• v.16 no.2
• /
• pp.227-240
• /
• 1999

We performed CCD photometric observations of W UMa type contact binary BV Dra during eight nights from May 1996 to June 1999 using 61cm telescope at Sobaeksan Optical Astronomy Observatory, and completed BV R light curves of the system. From our observations, we derived nine new times of minimum lights (five timings for primary eclipse, four for secondary) and determined new light elements with the times of minima observed since 1999. Our BV R light curves and Batten & Lu(1986)'s radial-velocity ones were simultaneously analyzed with contact mode (Mode 3) of Wilson-Devinney's binary model, and the photometric and spectroscopic solutions for BV Dra were solved. In the analysis, we derived the solutions of 1999 light curves with and without spots, respectively. As the results, asymmetry of light curves may be interpreted as produced by the existence of two spots; hot spot on the secondary and cool on the primary. Combining solutions of light curves and radial-velocity ones, absolute dimensions of BV Dra are $M_1=0.40M_{odot}$, $M_2=1.01M_{odot}$, $R_1=0.72R_{odot}$, $R_2=0.40R_{odot}$. In mass-radius diagram, the less massive and hotter primary component of BV Dra is near TAMS and the secondary is near ZAMS, which is very similar to the other W-type W UMa binaries.