• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.1
• /
• pp.34-39
• /
• 2014

In cognitive radios, secondary users can use the spectrum exclusively allocated to a primary wireless system if the secondary users detect the spectrum in idle states. Because the secondary users can utilize the idle state of the spectrum, the utilization rate of the spectrum can be improved. The idle states can be detected by using secondary users' sensing schemes. However, the wireless channel environment where secondary users perform the spectrum sensing is not very friendly to secondary users because the signal-to-noise ratio of the received primary signal is very low. Hence, cooperative sensing scheme where more than one secondary user take part in the spectrum sensing is generally used in cognitive radios. In this paper, we investigate the cooperative sensing performance for machine-to-machine communication devices operated by batteries with limited energy. In general, the energy consumed for the spectrum sensing increases as the length of the sensing period and the number of cooperative sensing nodes. Accordingly, even though the total amount of the consumed energy is the same, an energy allocation methodology how to distribute the energy to the sensing period and sensing nodes can achieve the optimum sensing performance, which is numerically analyzed.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.65-66
• /
• 2008

This paper proposes a compensating algorithm for the secondary current of the measurement current transformer (CT) that removes the effects of the hysteresis characteristics of the iron-core. The exciting current resulting from the hysteresis characteristics of the core causes an error between the primary current and the secondary current of the CT. The proposed algorithm decomposes the exciting current into the magnetizing current and the core loss current and each of them is estimated. The core loss current is calculated from the secondary voltage and the secondary voltage-core loss current curve. The core flux linkage is calculated and then inserted into the flux-current curve to estimate the magnetizing current. The exciting current at every sampling interval is obtained by summing the core-loss and magnetizing currents and then added to the measured current to compensate the secondary current. The performance of the proposed algorithm is validated under various conditions using EMTP generated data. The test results of the real CT were also included. The results indicate that the proposed algorithm can improve the accuracy of the measurement CT significantly, and thus reduce the size and the cost of the CT.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.305-308
• /
• 2002

Decursinol angelate, a new anticancer agent, was produced by root cultures of Angelica gigas Nakai. In addition, difference of specific yields between primary and secondary root was investigated. It was found that specific yield of secondary root was much higher than that of primary root at various conditions, so that it was thought that the formation and growth of secondary root were feasible. From this point of view, effects of root segmentation and plant growth regulators (NAA, IBA) on root morphology and decursinol angelate production were examined. Root segmentation increased secondary root mass and product formation. On the other hand, addition of NAA or IBA at various concentrations promoted secondary root formation and production of decursinol angelate significantly. Five-fold increase of production was obtained at 4 mg/L of IBA compared to control without NAA and IBA.

• Journal of Engineering Education Research
• /
• v.16 no.5
• /
• pp.9-17
• /
• 2013

The purpose of this study is to analyze elementary and secondary school teachers' recognition about engineering education in elementary and secondary school. For this, we surveyed elementary and secondary school teachers. The result of this study is as follow. First, most teachers perceived that engineering positively affect national competitiveness and development. They also found that engineering education helps student to select natural science and engineering field career. Moreover, they perceived that engineering contents are not applied in elementary and secondary schools curriculums, hence it does not stimulate interest in engineering. Therefore, they perceived that if engineering education contents are systematically applied in formal curriculum, it will have a positive effect on current engineering education. Second, most teachers perceived that roles of engineering education are to make students learn creative design and problem solving process and inform about the engineering field career. They perceived that the best grade to start engineering education is 4~6 grade in elementary school and the best way to apply engineering education is through distributing engineering education contents to related subjects. They also perceived that technology subject has the most relation to engineering education and science subjects; mathematics subject follow after.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.11a
• /
• pp.114-119
• /
• 2002

In driving situation, driver’s performance can be divided into primary task and secondary task. Many studies of primary task have been in progress, but those of secondary task are not implemented sufficiently. However, the driver’s error is greatly influenced by secondary task. In this study, an experiment was assessed to determine the relationship between the driver's operation time for the secondary task and mental workload due to speed changes in a driving simulation. The time to perform the secondary task was analyzed with Fitts’ Law, and mental workload was analyzed with RNASA-TLX(Revision of NASA-Task Load Index). The results has showed that the higher speed, the weaker the explanation by the use of Fitts' Law and the result of analyzing mental workload using RNASA-TLX was similar to the result of Fitts’ Law.

• Journal of Power System Engineering
• /
• v.18 no.2
• /
• pp.25-30
• /
• 2014

In this paper, the heat transfer coefficient and pump consumption power of indirect refrigeration system using $CO_2$ as a secondary refrigerant were investigated experimentally. First, from the comparison of pump consumption powers of existing brines(EG, PG, EA etc.) and $CO_2$ as secondary refrigerants at the same experimental conditions, PG and $CO_2$ show the highest and lowest power, respectively. Second, the heat transfer coefficient of $CaCl_2$ is the highest, but PG is the lowest among other secondary refrigerants. From the above results, it is confirmed that $CO_2$ as the secondary refrigerant has excellent characteristics when comparing to existing brines. Thus, it is concluded that $CO_2$ is applicable as the secondary refrigerant of indirect refrigeration system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.10
• /
• pp.835-842
• /
• 2003

A three dimensional numerical analysis has been conducted for a stoker type incinerator which has the capacity of 1.5 ton/hr. The objective of the present study is to predict the effects of swirl induced by secondary air and to find an optimal operating condition of the incinerator. In this study, combustion characteristics such as distributions of temperature, velocity and concentration of each species have been examined with various injection types of secondary air and with different flow rates of secondary air in the incinerator. It is found that the secondary air injection on the combustion process makes the path of fluid particle longer in the combustor and enhances the mixing between air and combustion gas by arousing a swirl. Therefore, the injection type of secondary air can be an important key in the design process of incinerator.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.6
• /
• pp.37-44
• /
• 2015

Conjugate heat analysis on a high pressure turbine stage including secondary flow paths has been carried out. The secondary flow paths were designed to be located in front of the nozzle and between the nozzle and rotor domains. Thermal boundary conditions such as empirical based temperature or heat transfer coefficient were specified at nozzle and rotor solid domains. To create heat transfer interface between the nozzle solid domain and the rotor fluid domain, frozen rotor with automatic pitch control was used assuming that there is little temperature variation along the circumferential direction at the nozzle solid and rotor fluid domain interface. The simulation results showed that secondary flow injected from the secondary flow path not only prevents main flow from penetrating into the secondary flow path, but also effectively cools down the nozzle and rotor surfaces. Also thermal barrier coating with different thickness was numerically implemented on the nozzle surface. The thermal barrier coating further reduces temperature gradient over the entire nozzle surface as well as the overall temperature level.

• Particle and aerosol research
• /
• v.9 no.2
• /
• pp.111-125
• /
• 2013

Among the hazardous air pollutions(HAPs), characteristics of secondary organic aerosols are not well understood. In this study, the current state for the measurement and analysis of representative secondary PAHs such as oxy-PAHs and nitro-PAHs are presented with the discussion of their toxicity. Also, further research directions for the secondary PAHs are suggested. It was found that the chemical reaction mechanisms and products of PAHs in the air are poorly identified and their toxicities are not well studied. Moreover ambient concentrations of those secondary PAHs are not well documented. Sampling methodologies of those secondary PAHs are similar with PAHs but the analytical protocols for those secondary PAHs are more complicated than PAHs. Future management directions are suggested along with future research directions.

• Journal of the Korean Institute of Educational Facilities
• /
• v.21 no.4
• /
• pp.3-10
• /
• 2014

The opportunity, provided for a direction planning mixed-use facilities for secondary schoo, is the purpose of this paper. Mixed-use facilities are an important issue in school building as it seeks to revive the facilities for local residents in school zone. The latest works of mixed-use facilities in secondary school, however, which are evaluated as well reflected the patterns of education and local community, are still deficient in that communicational elements in secondary school are inadequate. The cases of this paper, which are grown up as an educational building with mixed-use facilities opened to the local residents, are suitable to offer the design method for the future secondary school with mixed-use facilities. This paper reviews an assessment of its success in mixed-use facilities for secondary school as a public building for both of local residents and students and concludes with the establishment of design method for the future school; extraction of the factors contributing to development of mixed-use facilities in school area and proposal of design method; implementation of renewal of mixed-use facilities including educational program and spaces for the creation of identity.