• International Commerce and Information Review
• /
• v.12 no.3
• /
• pp.35-53
• /
• 2010

In connection with a non-cash payment through the banking system, "finality of payment" has acquired diverse meanings. In according to Section 4A-209(2), the acceptance by the beneficiary's bank by means of receiving payment "pursuant to section 4A-403(a)(1) or 4A-403(a)(2)," constitutes final settlement through a Federal Reserve Bank or through a funds-transfer system" or credit to the account of the beneficiary's bank. Above of all, Acceptance by beneficiary's bank is the most important. According to 4A-209(b), the beneficiary's bank can accept a payment order in one of four ways : First, by paying the beneficiary; obligating itself to pay the beneficiary or, Second, by notifying the beneficiary of receipt of the order or notifying the beneficiary that its account was credited or, Thirdly, by receiving full payment from the sender's order or Lastly, by passage of time, i.e., the opening of the next funds transfer business day of the bank following the payment date of the order. A beneficiary's bank is considered to have accepted a payment order when the earliest of the four means of acceptance occurs.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.35-41
• /
• 2014

The wood pellet, which is one of the woody biomass energy, has very high economic efficiency and combustion efficiency during their combustion. The existing pellet burner have many problems such as low combustion efficiency, flame stabilization, ash problem and ignition time etc. We developed cyclonic wood pellet burner aim to 20,000kcal/hr boiler and measured temperature profiles and exhaust gases in order to investigate the flame stability and optimum combustion condition at any air flow conditions. As results, we confirmed the reappearance and the isotropy of the experimental results in the burner. At the first air flow inlet condition of excess air ratio ${\alpha}=0.02$, second air flow $490{\ell}/min$ had the best combustion condition when pellet supplied 30g. This result means that we need much air supply only for the swirling of second air flow. So we tested various second air flux at first air excess air ratio ${\alpha}=0.7$ condition. At this condition, we could find out that we don't need much second air and total air flux compared to the former condition. We will continuously test this work of air flow distribution, and swirl effect of first air flow, and ash elimination.

• Steel and Composite Structures
• /
• v.12 no.5
• /
• pp.445-464
• /
• 2012

In order to evaluate the dynamic behavior of passive energy dissipation system, two steps need to be considered for prediction of structural response in the presence of ductile element in an off-centre bracing system. The first is a detailed analysis of the proposed ductile element and the second is the effect of this ductile element on an off-centre bracing system. The use of ductile bracing system is expanding in steel structures in order to increase the force reduction factor. Therefore, regarding the nonlinear behavior of steel material used in an off-centre bracing systems and using ductile element in OBS bracing systems, the seismic evaluation of the mentioned systems seems to be necessary. This paper aims to study linear and nonlinear behavior of steel frames with off-centre bracing system and ductile element, in order to get the best position of these bracing elements. To achieve this purpose, the modeling has been done with ANSYS software. The optimum eccentricity has been obtained by modeling three steel frames with different eccentricities and evaluating the results of them. The analytical results showed that the model OBS-C with 0.3 eccentricities has higher performance among the models.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.414-420
• /
• 1997

An intelligent speed control system for marine diesel engines is presented. The approach adopt¬ed is to use a conventional PID controller for normal operation and a feedforward controller for adaptive control. The feedforward controller is a neural network. The neural network is the inverse dynamics model of the plant, which is being trained on line. The parametric model of the diesel engine is represented in a linear second-order system, with a first-order combustion part and a revolution part each at a normal operating point. The time delay in the control of the com¬bustion part is approximated to the first-order system. The tuned PID parameters are set based on the model for normal operating point. To obtain the inverse dynamics of the diesel engine system, two neural networks are used, one for inverse, the other for forward dynamics. The former is posi¬tioned across the plant to learn its inverse dynamics during operation, and the latter is placed in series with the controlled plant. Simulation results are presented to illustrate the applicability of the proposed scheme to intelligent adaptive control of diesel engines.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.6
• /
• pp.751-771
• /
• 2011

Biogenic Volatile Organic Compound (BVOC) emissions are estimated with BEIS3.12 (Biogenic Emissions Inventory System version 3.12) over the Seoul Metropolitan Area (SMA) and then used in CMAQ (Community Multiscale Air Quality) simulations for two high ozone episodes in 2004 and 2007 June. The first- and second-order sensitivity coefficients of ozone to BVOC emissions are estimated with High-order Decoupled Direct Method (HDDM) simulation in order to estimate the influence of BVOC emissions on ozone using the Zero-Out Contribution (ZOC) approach. ZOC analysis shows that relative contribution of BVOC emissions on daily maximum 1-hr ozone is as high as 30% for high ozone days above 100 ppb. However simulated isoprene concentrations were over-estimated by a factor of 2 when compared to the observations at the PAMS (Photochemical Air Monitoring Station) for the 2007 episode. When assumed that actual BVOC emissions are 50% less than estimated, the ZOC of BVOC emissions on daily maximum ozone drops by more than 10 ppb for the episode. The result indicates that uncertainty in BVOC emissions may have significant impact on high ozone prediction in the SMA.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.721-726
• /
• 2004

A simplified method for the computation of first second and higher order derivatives of eigenvalues and eigenvectors derivatives associated with repeated eigenvalues is presented. Adjacent eigenvectors and orthonormal conditions are used to compose an algebraic equation whose order is (n+m)x(n+m), where n is the number of coordinates and m is the number of multiplicity of the repeated eigenvalues. The algebraic equation developed can be used to compute derivatives of both eigenvalues and eigenvectors simultaneously. Since the coefficient matrix in the proposed algebraic equation is non-singular, symmetric and based on N-space it is numerically stable and very efficient compared to previous methods. This method can be consistently applied to structural systems with structural design parameters and mechanical systems with lumped design parameters. To verify the effectiveness of the proposed method, the finite element model of the cantilever beam is considered.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.804-811
• /
• 2009

This paper deals with the relationship between zeros and step response of the second and third order LTI(Linear Time Invariant) SISO(Single-Input and Single-Output) systems. As well known, if a system has a single unstable zero, it shows the step response with undershoot and, on the other hand, a stable zero slower than the dominant pole causes the system to have the step response with overshoot. Generally, in the case of a system with two unstable real zeros, it is known to have B type undershoot[7]. But there are many complex cases of the step response extrema corresponding to zeros location in third order systems. This paper investigates the whole cases depending on DC gains of the additive equivalence systems and they are to be classified by the region of zeros which are related to the shape of the step response. Moreover, monotone nondecreasing conditions are proposed in the case of complex conjugate zeros as well as the case of two stable zeros.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.577-580
• /
• 1998

In this paper, we psresent the design strategy of the assistive communication system for the mute and speech disorder to be able to communicate with people under the restricted circumstances. First, it should be used conventiently in daily life and a specific domain should be set accoridng to the circumstance. Second, proper words in each domain should be selected according to the physical and mental ability of users. This paper seeks to highlight some of the issues involved in using semantic compaction in adynamic environment. (e.g. noun and verb explorable system). In additon, symbols are used in this system in order to make users recognize clearly the meaning of a words. The sentences are compounded from symbols. The compounded sentences are shown on the display monitor in letter,s and synthesized naturally in voice in order to be understood easily.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.755-760
• /
• 1990

VAXIMA is a computer software which gives us results in terms of parameters. We use VAXIMA to analyze quantitatively a conservative dynamical system with cubic and quintic nonlinear terms. The system is described by a nonlinear second-order autonomous ordinary differential equation. Using the Lindstedt-Poincare method, we obtain period-amplitude characteristics. In order to check the validity of the approximate solution, we integrate numerically the equation of motion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.215-224
• /
• 2000

In order to reduce the variation effects of uncertainties in the engineering environments, new robust optimization method, which considers the uncertainties in design process, is proposed. Both design variables and system parameters are considered as random variables about their nominal values. To ensure the robustness of performance function, a new objective is set to minimize the variance of that function. Constraint variations are handled by introducing probability constraints. Probability constraints are solved by the advanced first order second moment (AFOSM) method based on the reliability theory. The proposed robust optimization method has an advantage that the second derivatives of the constraints are not required. The suggested method is examined by solving three examples and the results are compared with those for deterministic case and those available in literature.