• The Korean Journal of Ceramics
• /
• v.1 no.4
• /
• pp.179-184
• /
• 1995

Sodium superionic conductor (NASICON) compounds were prepared. The effects of sintering temperature and cooling rate on the formation and the distribution of crystalline NASICON and $ZrO_3$ second phase were investigated. In the von Alpen-type composition, the $ZrO_2$ second phase is in thermal equilibrium with the crystalline NASICON above $1320^{\circ}C$, but when cooled through 1260-$1320^{\circ}C$ crystalline NASICON was formed by reaction between $ZrO_2$ and liquid phase. Very slow cooling ($1^{\circ}C$/hr) to $1260^{\circ}C$ from sintering temperature decreased the amount of sodium which prevents the formation of the crystalline NASICON resulted high number of $ZrO_2$ grains near the surface of some sintered bodies. Maximum electrical conductivity of 0.200 ohm-1cm-1 was obtained at $300^{\circ}C$ for well-sintered samples with little $ZrO_3$. On the other hand, low conductivities were obtained for rapid-cooled samples which have less dense microstructure.

• Journal of Powder Materials
• /
• v.26 no.3
• /
• pp.214-219
• /
• 2019

In this study, the microstructure and characterization of an overlay welding layer using Fe-based composite powders are reported. The effects of the number of passes and composition of powders on the microstructure and mechanical properties are investigated in detail. The welding wire and powders are deposited twice on a stainless-steel rod using a laser overlay welding process. The microstructure and structural characterization are performed by scanning electron microscopy and X-ray diffraction. The mechanical properties of the first and second overlay layers are analyzed through the micro-Vickers-hardness tester and abrasion wear tester. In the second overlay layer, the hardness and specific wear are approximately 840 Hv and $2.0{\times}10^{-5}mm^3/Nm$, respectively. It is suggested that the increase of the volume fractions of $(Cr,Fe)_7C_3$ and NbC phases in the second welding layer enhances the hardness and wear resistance.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.153-159
• /
• 2021

A two-step process for increasing the leaching efficiency of yttrium and neodymium from coal fly ash were investigated at solid loadings of 5.0 g ash ~1,000 g ash/l of 1.0 N~10.0 N H₂SO₄, temperature ranging from 30℃ to 90℃, ultrasonic leaching time of 1~10 hours, and ultrasonic power of 25~200 W. The yttrium and neodymium from coal fly ash were effectively leached into ion phases by step change of the first conventional dissolution at room temperature and then the second heating process with the aid of ultrasonic wave, and maximum leaching efficiency of yttrium and neodymium obtained were 66 % and 63 %, respectively. The activation energies for the leaching reaction of yttrium and neodymium at second heating process dependent on leaching time and temperature were derived to be 41.540 kJmol^-1 and 507.92 kJmol^-1, respectively. The optimum conditions for the maximum leaching of yttrium and neodymium were found to be the solid loading of 250 g ash/l of H₂SO₄, solvent concentration of 2.0 N H₂SO₄, and second step process of temperatures of 30℃ for 3 hours and then 90℃ for 4 hours with ultrasonic intensity of 100 W.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• The Korean Journal of Zoology
• /
• v.11 no.2
• /
• pp.48-54
• /
• 1968

Male rats of the Albino strain received methylene blue in the dose of 40mg/kg by subcutaneous injection and were subjected to total body X-irradiation, 300 roentgen, at 30 minutes after the injection. The protective effect of methylene blue against the single total body X-irradiation was studied for 24 days after X-irradiation with regard to the levels of liver glycogen, blood glucose, and electrolytes in serum. 1. Total body X-irradiation generally casued an increase in the levels of the liver glycogen and blood glucose in both methylene blue treated and control group during the entire experiment. 2. Methylene blue has been shown to delay slightly the increase of the levels of the liver glycogen and blood glucose when comparing with both groups which were given methylene blue and control saline injection before irradiation in the rats. 3. The delay in the increase in the levels of liver glycogen, in experimental group injected with methylene blue, significantly came in two phases. The first phase appeared at there days after the exposure, the second followed at eighth day. It appeared that the recovery phase was at nineteenth day. 4. During the experimental days the levels of the blood glucose increased generally, methylene blue, however, caused delay in two phases; the first at fifth day, the second at eighteenth day after the exposure to X-rays. 5. In electrolytes, there was not a significant difference. The levels of chloride were, however, slightly decreased in both groups, levels of potassium appeared different in two phases at first day and twelfth day, and the levels of sodium appeared to show irregular changes at the same levels, but there was no significant difference. 6. It may be considered that methylene blue greatly reduces the sensitivity of rats to X-rays, provided that methylene blue is given before the exposure.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3223-3228
• /
• 2012

HMGN5 is a typical member of the HMGN (high mobility group nucleosome-binding protein) family which may function as a nucleosomal binding and transcriptional activating protein. Overexpression of HMGN5 has been observed in several human tumors but its role in tumorigenesis has not been fully clarified. To investigate its significance for human lung cancer progression, we successfully constructed a shRNA expression lentiviral vector in which sense and antisense sequences targeting the human HMGN5 were linked with a 9-nucleotide loop. Inhibitory effects of siRNA on endogenous HMGN5 gene expression and protein synthesis were demonstrated via real-time RT-PCR and western blotting. We found HMGN5 silencing to significantly inhibit A549 and H1299 cell proliferation assessed by MTT, BrdU incorporation and colony formation assays. Furthermore, flow cytometry analysis showed that specific knockdown of HMGN5 slowed down the cell cycle at the G0/G1 phase and decreased the populations of A549 and H1299 cells at the S and G2/M phases. Taken together, these results suggest that HMGN5 is directly involved in regulation cell proliferation in A549 and H1299 cells by influencing signaling pathways involved in cell cycle progression. Thus, our finding suggests that targeting HMGN5 may be an effective strategy for human lung cancer treatment.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4807-4814
• /
• 2012

Purpose: The chemoresistance of human hepatocellular carcinoma (HCC) to cytotoxic drugs, especially intrinsic or acquired multidrug resistance (MDR), still remains a major challenge in the management of HCC. In the present study, possible mechanisms involved in MDR of HCC were identified using a 5-fluorouracil (5-FU)-resistant human HCC cell line. Methods: BEL-7402/5-FU cells were established through continuous culturing parental BEL-7402 cells, imitating the pattern of chemotherapy clinically. Growth curves and chemosensitivity to cytotoxic drugs were determined by MTT assay. Doubling times, colony formation and adherence rates were calculated after cell counting. Morphological alteration, karyotype morphology, and untrastructure were assessed under optical and electron microscopes. The distribution in the cell cycle and drug efflux pump activity were measured by flow cytometry. Furthermore, expression of potential genes involved in MDR of BEL-7402/5-FU cells were detected by immunocytochemistry. Results: Compared to its parental cells, BEL-7402/5-FU cells had a prolonged doubling time, a lower mitotic index, colony efficiency and adhesive ability, and a decreased drug efflux pump activity. The resistant cells tended to grow in clusters and apparent changes of ultrastructures occurred. BEL-7402/5-FU cells presented with an increased proportion in S and G2/M phases with a concomitant decrease in G0/G1 phase. The MDR phenotype of BEL-7402/5-FU might be partly attributed to increased drug efflux pump activity via multidrug resistance protein 1 (MRP1), overexpression of thymidylate synthase (TS), resistance to apoptosis by augmentation of the Bcl-xl/Bax ratio, and intracellular adhesion medicated by E-cadherin (E-cad). P-glycoprotein (P-gp) might play a limited role in the MDR of BEL-7402/5-FU. Conclusion: Increased activity or expression of MRP1, Bcl-xl, TS, and E-cad appear to be involved in the MDR mechanism of BEL-7402/5-FU.

• Journal of Animal Science and Technology
• /
• v.58 no.10
• /
• pp.37.1-37.10
• /
• 2016

Background: Providing of insufficient nutrients limits the potential growth of pig, while feeding of excessive nutrients increases the economic loss and causes environment pollution. For these reasons, phase feeding had been introduced in swine farm for improving animal production. This experiment was conducted to evaluate the effects of dietary energy levels and phase feeding by protein levels on growth performance, blood profiles and carcass characteristics in growing-finishing pigs. Methods: A total of 128 growing pigs ([Yorkshire ${\times}$ Landrace] ${\times}$ Duroc), averaging $26.62{\pm}3.07kg$ body weight, were assigned in a $2{\times}4$ factorial arrangement with 4 pigs per pen. The first factor was two dietary energy level (3,265 kcal of ME/kg or 3,365 kcal of ME/kg), and the second factor was four different levels of dietary protein by phase feeding (1growing(G)-2finishing(F) phases, 2G-2F phases, 2G-3F phases and 2G-3F phases with low CP requirement). Results: In feeding trial, there was no significant difference in growth performance. The BUN concentration was decreased as dietary protein level decreased in 6 week and blood creatinine was increased in 13 week when pigs were fed diets with different dietary energy level. The digestibility of crude fat was improved as dietary energy levels increased and excretion of urinary nitrogen was reduced when low protein diet was provided. Chemical compositions of longissimus muscle were not affected by dietary treatments. In backfat thickness ($P_2$) at 13 week, pigs fed high energy diet had thicker backfat thickness (P = 0.06) and pigs fed low protein diet showed the trend of backfat thinness reduction (P = 0.09). In addition, water holding capacity was decreased (P = 0.01) and cooking loss was increased (P = 0.07) as dietary protein level reduced. When pigs were fed high energy diet with low subdivision of phase feeding, days to 120 kg market weight was reached earlier compared to other treatments. Conclusion: Feeding the low energy diet and subdivision of growing-finishing phase by dietary protein levels had no significant effect on growth performance and carcass characteristics. Also, phase feeding with low energy and low protein diet had no negative effects on growth performance, carcass characteristics but economical profits was improved.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.579-587
• /
• 2013

A total of 288 crossbred (Duroc${\times}$Landrace${\times}$Yorkshire) growing pigs were used in two experiments to investigate the effects of adding ${\beta}$-mannanase to corn-soybean meal-based diets on pig performance and apparent total tract digestibility (ATTD). Both experiments lasted 28 d and were split into two phases namely 1 to 14 days (phase 1) and 15 to 28 days (phase 2). In Exp. 1,144 pigs weighing $23.60{\pm}1.59$ kg BW were assigned to one of four corn-soybean meal-based diets containing 0, 200, 400 or 600 U/kg ${\beta}$-mannanase. Increasing the level of ${\beta}$-mannanase increased weight gain (quadratic effect; p<0.01) and feed efficiency (linear and quadratic effect; p<0.01) during the second phase and the overall experiment. However, performance was unaffected (p>0.05) by treatment during phase 1. Increasing the amount of ${\beta}$-mannanase in the diet improved (linear and quadratic effect; p<0.05) the ATTD of CP, NDF, ADF, calcium, and phosphorus during both phases. Based on the results of Exp. 1, the optimal supplementation level was determined to be 400 U/kg and this was the level that was applied in Exp. 2. In Exp. 2, 144 pigs weighing $23.50{\pm}1.86$ kg BW were fed diets containing 0 or 400 U/kg of ${\beta}$-mannanase and 3,250 or 3,400 kcal/kg digestible energy (DE) in a $2{\times}2$ factorial design. ${\beta}$-Mannanase supplementation increased (p<0.01) weight gain and feed efficiency while the higher energy content increased (p<0.01) feed intake and feed efficiency during both phases and overall. Increased energy content and ${\beta}$-mannanase supplementation both increased (p<0.05) the ATTD of DM, CP, NDF, ADF, phosphorus, and GE during both phases. There were no significant interactions between energy level and ${\beta}$-mannanase for any performance or digestibility parameter. In conclusion, the ${\beta}$-mannanase used in the present experiment improved the performance of growing pigs fed diets based on corn and soybean. The mechanism through which the improvements were obtained appears to be related to improvements in ATTD.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1411-1415
• /
• 2008

The purpose of the present study was to determine the onset of breeding season, the occurrence of silent and true heats and the duration of estrus in female Markhoz goats of the Kurdistan province in Iran. Ten, 3 years-old Markhoz does with an average weight of $34.05{\pm}2.62kg$ and with one kidding record, were used. The goats were maintained in an open barn under constant nutritional levels and natural photoperiod. One aproned buck was used twice a day every 12 h to detect estrus from mid August to early January. For the determination of the onset of reproductive activity as well as occurrence of silent heat, blood samples were collected every 10 days, from the beginning of the experiment. After $2^{nd}$ standing heat, blood samples were obtained twice a week in order to assess luteal activity and the length of estrous cycles. In this study, estrous behavior was observed including sniffing, vocal exchange, following courtship, flehman, standing heat and mounting. The results of the progesterone assay indicated that in this goat silent heats occur mostly in the early breeding season. The first standing heat was observed in mid-October which was considered as the onset of the breeding season. Duration of the estrous cycle and estrus was recorded as being $20.93{\pm}1.56days$ and $38.86{\pm}15.19h$, respectively. The correlation coefficient between length of daylight and occurrence of estrus was negative (r = -0.470) but not significant (p>0.05). The data showed that there was no significant effect of body weight on estrous cycles (first, second and third) and estrous periods (first, second, third and fourth). Progesterone levels were not significantly different in the first, second and third estrous cycles at days 0, 4, 10, 12, 14 and 19. The results of progesterone assay during the estrous cycle indicate that follicular and luteal phases last 4-5 and 14-15 days, respectively and the concentration of serum progesterone in these phases was $0.88{\pm}0.08$ and $7.44{\pm}0.26ng/ml$, respectively. The study concluded that Markhoz does could be considered as a breed with a short breeding season and an optimal estrous activity in autumn.