• ALGAE
• /
• v.39 no.1
• /
• pp.31-41
• /
• 2024

Acadian marine plant extract powder (AMPEP) and Kelpak are commercial biostimulants derived from brown algae Ascophyllum nodosum. This study was to determine if AMPEP and Kelpak can induce thermal resistance in Pyropia yezoensis. P. yezoensis blades were exposed to different concentrations (control: 0, low: 0.001, high: 1 ppm) of AMPEP and Kelpak at 10℃ for 6 and 7 days, respectively. Those blades were then cultivated in von Stosch enriched seawater medium at different temperatures (10, 15, 20, and 25℃) with 12 : 12 L : D photoperiod and 100 µmol m^-2 s^-1 of photosynthetically active radiation for additional 15 days. Results showed that P. yezoensisreproduced archeospores at 20 and 25℃ at all biostimulant conditions within 15 days. At lower temperatures (10 and 15℃), only AMPEP-treated P. yezoensis reproduced archeospores. P. yezoensis exposed to 1 ppm Kelpak exhibited higher phycoerythrin and phycocyanin contents than control and 0.001 ppm conditions at 15℃. AMPEP-treated conditions showed higher phycoerythrin and phycocyanin contents than control at 10℃. These results suggest that AMPEP and Kelpak may not enhance the thermal resistance of P. yezoensis. However, AMPEP stimulated archeospores release at lower temperatures. The treatment of AMPEP and Kelpak also increased the pigment contents in P. yezoensis. These results suggest that the use of seaweed-derived biostimulants can provide some economic benefits in P. yezoensis aquaculture. The enhancement of archeospores formation by AMPEP at lower temperature may also increase the productivity since Pyropia farming relies on the accumulation of secondary seedings via asexual reproduction.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.473-476
• /
• 2004

In this study, hydrochemical studies of thermal waters in the Bugok and Magumsan areas showing geothermal anomalies were carried, and the applicability of ion seothermometers and multiple mineral equilibrium approach was examined to estimate their potential deep reservoir temperatures. Typical thermal waters of the two areas are clearly grouped into two major types, according to water chemistry: Na-Cl type (group A) and Na-SO4 type (group D). Compared to group A, group B and C waters show some modifications in chemistry. Group E waters show the modified chemistry from group D. Geothermal waters from the two areas showed some different chemical characteristics. The thermal waters of group A and B in Magumsan area are typically neutral to alkaline (pH=6.7 to 8.1) and Cl-rich (up to 446.1 mg/L), while the waters of group D and E in Bugok area are alkaline (pH=7.6 to 10.0) and SO$_4$-rich (up to 188.0 mg/L). The group A (Na-Cl type) and group D (Na-SO$_4$ type) waters correspond to mature or partially immature water, whereas the other types are immature water. The genesis of geothermal waters are considered as follows: group A and B waters were formed by seawater infiltration into reservoir rocks along faults and fracture zones and possibly affected by fossil connate waters in lithologic units through which deep hot waters circulate; on the other hand, group D and E waters were formed by the oxidation of sulfide minerals (mainly pyrite) in surrounding sedimentary rocks and/or hydrothermal veins occurring along restricted fracture channels and were possibly affected by the input and subsequent oxidation of S-bearing gases (e.g. H2S) from deep thermal reservoir (probably, cooling pluton). The application of quartz, Na-K, K-Mg geothermometers to the chemistry of representative group A and D waters yielded a reasonable temperature estimate (99-147$^{\circ}C$ and 90-142$^{\circ}C$) for deep geothermal reservoir. Aqueous liquid-rich fluid inclusions in fracture calcites obtained from drillcores in Bugok area have an average homogenization temperature of 128$^{\circ}C$, which corresponds to the results from ion geothermometers. The multiple mineral equilibrium approach yielded a similar temperature estimate (105-135$^{\circ}C$ and 100-14$0^{\circ}C$). We consider that deep reservoir temperatures of thermal waters in the Magumsan and Bugok areas can be estimated by the chemistry of typical Na-Cl and Na-SO$_4$ type waters and possibly approach 105-135$^{\circ}C$ and 100-14$0^{\circ}C$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.2
• /
• pp.52-62
• /
• 1974

The fresh water prawn, Macrobrachium rosenbergi (De Maan) is a very common species in Info-pacific region inhabiting both fresh and brackish waters in low land areas, and especially abundant in the lower reaches of most rivers which are influenced by seawater, It is one of the largest and commercial species of genus Macrobrachium. As a place of the researches to clear the possibilities of transplantation and propagation of this species in the Far East region the larval development, growth, optimum temperature and metamorphose rate up to first post larvae in aquaruim are cleared under the conditions of salinity $6.58-7.05\%_{\circ}$ Cl, pH 8.0-8.2, the rate of flow 0.3 liter per minute and illumination 3000 lux. Temperature ranged from 27.5 to $28.7^{\circ}C$ during the period of earlier larval development. For the study oil the relationship between temperature and metamorphose rate from zoea to first post larvae, the temperatures in experimental tank were $22.2^{\circ}C\pm1$, $26.1^{\circ}C\pm0.85$, $28.1^{\circ}C\pm0.34$, $30.4^{\circ}C\pm0.66$, $33.7^{\circ}C\pm0.66$, $33.7^{\circ}C\pm0.38$ and $36.8^{\circ}C\pm0.26$. During the work, food used for the larvae was Artemia salina nauplius in the filter-circulation aquariums. This species metamorphosed to the first post-larvae through eleven zoea stages, and the characters of each larval stage are described and optimum temperature for metamorphosis rate and survivals to the first post larvae is $28.1^{\circ}C\pm0.34$.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.238-244
• /
• 1994

To investigate the bacterial potentials for utilizing dissolved organic matter in highly eutrophic estuary, the annual fluctuations of microbiological and physicochemical environmental parameters were analyzed in Naktong River Estuary. Total bacterial number ranged from 0.33 to $2.09{\times}10^7$ cells/ml, and correlated with the heterotrophic bacterial numbers in more eutrophic sites, especially. Bacterial biovolume and biomass varied between 0.064 and 0.156 2.09${\mu}m^3$/cell, 0.163 and 1.036 ${\mu}g$-C/ml, respectively. Bacterial secondary productivity ranged from 0.24 to 60.86 ${\mu}g$-C/l/h, and showed high correlations with the environmental parameters of pollution indicator. The seasonal variation pattern of bacterial productivity in freshwater sites was high in winter and low in summer, which was interpreted as the results of pollution loads varied with the amount of rainfall. In seawater site, the pattern was different from those of freshwater sites; high in summer and low in winter. In this site, the values of bacterial productivity showed positive correaltions with chlorophyll a, heterotrophic bacterial number, and temperature (r>0.5, p<0.05). These results suggested that the main source of organic matter which influences the bacterial productivity may be allochthonous materials in the upper freshwater zone of Naktong River Barrage, and autochthonous algal excretory products in the lower seawater zone of Naktong River Barrage.

• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.134-141
• /
• 2015

An agarolytic marine bacterium (H9) was isolated from the coastal seawater of the West Sea, South Korea. The isolate, H9, was gram-negative and rod-shaped with a smooth surface and polar flagellum. Cells grew at 20-30℃, between pH 5.0 and 9.0, and in ASW-YP (Artificial Sea Water-Yeast extract, Peptone) media containing 1-5% (w/v) NaCl. The G+C content was 41.56 mol%. The predominant isoprenoid quinone in strain H9 was ubiquinone-8. The major fatty acids (>10%) were C_16:1ω7c (34.3%), C_16:0 (23.72%), and C_18:1ω7c (13.64%). Based on 16S rRNA gene sequencing, and biochemical and chemotaxonomic characterization, the strain was designated as Pseudoalteromonas sp. H9 (=KCTC23887). In liquid culture supplemented with 0.2% agar, the cell density and agarase activity reached a maximum level of OD = 4.32 (48 h) and OD = 3.87 (24 h), respectively. The optimum pH and temperature for the extracellular crude agarases of H9 were 7.0 and 40℃, respectively. Thin-layer chromatography analysis of the agarase hydrolysis products revealed that the crude agarases hydrolyze agarose into neoagarotetraose and neoagarohexaose. Therefore, the new agar-degrading strain, H9, can be applicable for the production of valuable neoagarooligosaccharides and for the complete degradation of agar in bio-industries.

• Fisheries and Aquatic Sciences
• /
• v.1 no.1
• /
• pp.82-93
• /
• 1998

Monthly changes of the gonad follicle index (GFI), reproductive cycle, egg-diameter composition, first sexual maturity of the Pacific oyster, Crassostrea gigas, were studied based on the samples which have been collected from the intertidal zone of Poryong west coast of Korea, from January to December, 1996. C. gigas, is dioecious, while a few individuals are alternatively hermaphroditic. Monthly variation of gonad follicle index (GFI) used for determination of spawning period, coincided with the reproductive cycle. GFI increased from April when seawater temperatures gradually increased and reached the maximum in May. And then, GFI sharply decreased from June to September due to spawning. Reproductive cycle of this species can be divided into five successive stages: in females, early active stage (March to April), late active stage (April to May), ripe stage (May to August), partially spawned stage (June to September) and spent/inactive stage (September to February); in males, early active stage (February to March), late active stage (April to May), ripe stage (May to September), partially spawned stage (June to September) and spent/ inactive stage (September to February). The diameter of fully mature eggs are approximately 50um. Spawning occurred from June to September, and two spawning peaks were observed in June and August when the seawater temperature was above $20^{\circ}C$. Percentages of the first sexual maturity of males of 20.1-25.0 mm in shell height were over $50\%$, while those of females of 25.1-30.0 mm in shell height were over $50\%$. All the males of > 30.1 mm and all the females of ^gt; 35.1 mm completed their first sexual maturity. The results suggest that C. gigas has a protandry phenomenon. Sex ratios of 919 oysters observed were 453 females $(49.29\%)$, 429 males $(46.68\%)$, 16 hermaphrodites $(1.74\%)$, and 21 indeterminate individuals $(2.29\%)$. In age class I, sex ratio of males were $64.00\%$, thus, a higher percentage than that of females. It was noted that $64.00\%$ of the young males (age class I) were more functional than females in age class I, but 2-3 year-old oysters showed higher percentage of females. Percentages of hemaphrodites in 2-3 year classes were relatively higher than those in other year classes. Histological pattern of hermaphrodites can be divided into two types: Type I (hermaphrodite having a number of newly formed developing oocytes on the oogenic tissues within a degenerating spermatogenic follicle after discharge of numerous spermatozoa) and Type II (hermaphrodite having two separate follicles in the same gonad).

• Journal of fish pathology
• /
• v.24 no.2
• /
• pp.85-93
• /
• 2011

Edwardsiella tarda is a broadly infectious agent against freshwater and seawater fishes. In the present study, E. tarda specific phage was isolated from fish farms on the west coast of Korea, and the effect of environmental factors such as pH and water temperature on the phage activity was investigated. As a fish model, Nile tilapia (Oreochromis niloticus) was used and the interaction between E. tarda and phage was investigated. The phage activity, in pH test, appeared even higher in seawater than freshwater and was evenly constant up to $50^{\circ}C$. The phage and E. tarda were inoculated in tilapia and the phage activity and E. tarda viability were checked on the time intervals. As a result, the number of E. tarda in the group of E. tarda plus phage was constantly reduced to 24 hr post-inoculation compared to the control group without phage, whereas the phage activity was slightly increased in the experiment group. The results suggest that it might be possible to use phage to control the fish disease caused by E. tarda.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.69-78
• /
• 1978

It is well known that the aluminizing steel is excellent in corrosion resistance and heat resistance. Therefore it has been used as boiler parts, heat exchanger parts and guide rails which are used under comparatively simple conditions. Recently, it has been noticed that aluminizing steel has high resistance to various atmosphere, high temperature oxidation and seawater resistance. So its usage has been extended widely to the production of parts such as intake and exhaust valve of internal combustion engine, turbine blade and pipelines On ships which required such properties. It is considered that aluminium coated steel is excellent in wear resistance because of high hardness on main ingredient FezAIs of Fe-AI alloy layer existed in diffusion coating layer. And it will beused as a new material taking wear resitance with seawater resistance in marine field. However it is difficult to findout any report concering the wear behaviors or properties of alum in izing steel. In this study the experiment was carried out under the condition of rolling-sliding contact using an Amsler-type wear testing machine at 0.80, 0.91, 1. 10, 1. 25% of slip ratio and 55.43, 78.38, 110.85 kg/mm^2 of Hertz's contact stress in run-in period for the purpose of service-ability test of aluminizing steel as a wear resisting material and obtaining the available design data. The followings are the obtained results from the experimen tal study; 1) The 2nd diffusion material has most excellent wear resistance. This material has brought out about 18% decrease of wear weight in a lower friction load level and 40~G decrease in a higher level comparing to the raw material. 2) Satisfactory effect of wear resistivity cannot be much expected in 2nd diffusion specimens. This is considered due to the formation of fine void in the alloy layer near the boundary to the aluminium layer. 3) Fracture on friction surface of aluminizing steel by the rolling-sliding contact is spalling, and spalling crack occurres initially beneath the specimen surface near the boundary in diffusion coating layer.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.561-569
• /
• 2012

To evaluate the bacteriological water quality in Yongnam-Gwangdo, located in western Jinhae Bay, seawater samples were analyzed using sanitary indicator bacteria at 57 sampling stations. According to survey results from January 2007 to December 2009, the range of the geometric mean and the estimated 90th percentile for coliforms and fecal coliforms in the samples were <1.8-16.5 and 1.8-246.8 MPN/100 mL and <1.8-7.1 and 1.8-74.8 MPN/100 mL, respectively. The samples, including those taken from stations located in Wonmunman, Gwangdo, and Dangdong, showed high levels of microbial contamination caused by the climate and weather patterns in the marine environment. The bacteriological water quality in the area met Korean criteria for a designated shellfish growing area for export and National Shellfish Sanitation Program criteria for an approved shellfish growing area, except at station #49. A total of 24 direct pollution sources were discharged into the shellfish growing area. The radius of impact was calculated for each pollution source to assess the effect on the shellfish growing area. The calculated radius of impact for most of the pollution sources was below 300 m. However, the radius of impact for the combined pollution sources in Kyeonnaeryang was 93-1973 m. There were significant differences between the calculated closed sea area and actual monitoring results. The closed sea area values calculated from the fecal coliform load in drainage water tended to be higher than the actual monitoring results. Tidal currents and environmental factors such as salinity, water temperature, sunlight, and microbiological factors affect the survival of fecal indicator bacteria in seawater.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.10-18
• /
• 2018

The primary purposes of this study are to understand a fundamental aspect of current uniformity around a reinforcing bar (rebar) in cement mortar, and to develop an accurate monitoring method in a wet-dry cycling process with the alternative current (AC) impedance method. Three cement mortar specimens with two embedded rebars were prepared in the laboratory. As a main variable, the distance between two rebars was designed to be 10, 20 and 30 mm with the same thickness of 20 mm. To simulate the corrosion of rebars in concrete structures in a marine environment, three cement mortar specimens were exposed to 15 wet-drying cycles (24-hour-immersion in seawater and 48-hour-drying in a room temperature) in the laboratory. It was observed that the potential level shifted to a noble value during corrosion potential monitoring, which is attributed to acceleration of dissolved oxygen diffusion at the drying process. AC impedance was measured in a frequency range from 100 kHz to 1 mHz on a wet-drying process. A theoretical model was proposed to explain the interface condition between the rebars and cement mortar by using the equivalent circuit consisting of a solution resistance, a charge transfer resistance and a CPE (constant phase element). It was observed that the diffusion impedance appeared in a low frequency range as corrosion of rebars progresses. At the drying stage of the wet-drying cycles, the currents line for monitoring tended to be non-uniform at the interface of rebar/mortar, being phase shift, ${\theta}$, close to $-45^{\circ}$.