• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.198-203
• /
• 1997

This paper deals with a numerical study of the tribological contact stress distributions of elastomeric lip seah for oscillating shafts when the sealing interference and band width between the lip edge of contact seals the shaft are present. Using the finite element method, the contact stress and band width of scraper seals rare analyzed for the sealing interference including some nonlinearities such as geometrical nonlinearity, material nonlinearity and nonlinear contact boundary condition. The FEM results showed that the contact stress concentrated on the contacting lip zone between the contacting edge of lip and the shaft for the increased interference. In double lip scraper seals, the maximum contact stress of the dust lip, which is used to exclude foreign contaminants, is six times higher than that of the primary sealing lip, which is used to contain lubricants.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권7호
• /
• pp.1103-1112
• /
• 2020

Objective: To measure whether a microbial additive could effectively improve the fermentation quality of delayed-sealing (DS) silage, we studied the effects of inoculants of lactic acid bacteria (LAB) and cellulase enzyme on microbial populations, ensiling characteristics, and spoilage loss of DS silage of Napier grass in Africa. Methods: Quick-sealing (QS) and DS silages were prepared with and without LAB (Lactobacillus plantarum) inoculant, cellulase enzymes, and their combination. The QS material was directly chopped and packed into a bunker silo. The DS material was packed into the silo with a delay of 24 h from harvest. Results: In the QS silage, LAB was dominant in the microbial population and produced large amounts of lactic acid. When the silage was treated with LAB and cellulase, the fermentation quality was improved. In the DS silage, aerobic bacteria and yeasts were the dominant microbes and all the silages were of poor quality. The yeast and mold counts in the DS silage were high, and they increased rapidly during aerobic exposure. As a result, the DS silages spoiled faster than the QS silages upon aerobic exposure. Conclusion: DS results in poor silage fermentation and aerobic deterioration. The microbial additive improved QS silage fermentation but was not effective for DS silage.

• Elastomers and Composites
• /
• 제41권2호
• /
• pp.88-96
• /
• 2006

본 연구에서는 연료 누출 시 자기 밀폐성을 갖는 연료 탱크에 사용할 수 있는 고무재료의 개발을 목적으로 발포천연고무에 카본블랙과 가공유를 $10{\sim}30phr$범위에서 혼련하여 함량에 따른 발포고무의 가황 특성, 밀도, 팽윤실험 및 표면형상을 조사하였다. 미가황 고무의 가황 특성은 가공유에 의해 $ts_2$와 $Tc_{90}$이 느려졌으나 카본블랙에 의해서는 뚜렷한 경향이 나타나지 않았다. 발포에 의한 밀도의 차는 가황 전과 비교해 1/5로 밀도가 감소하였다. 발포천연고무의 팽윤실험 측정 결과, 연료 C, 이소옥탄, 톨루엔에서는 2분 이내에 모든 발포고무에서 자기밀폐작용의 90% 이상이 완료되었다. 전자주사현미경(SEM)으로 표면형상을 관찰한 결과 sodium bicarbonate에 의한 발포는 비균등한 연속 발포 셀로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제46권3호
• /
• pp.35.1-35.11
• /
• 2021

Objectives: Endosequence Bioceramic Root Repair Material (BC-RRM) is used in endodontic microsurgery. It is available as a paste and a putty. However, no studies to date have examined the sealing ability of these forms alone or in combination as root-end filling materials. Hence, this study aimed to compare the sealing properties of these 2 forms of BC-RRM. Materials and Methods: Forty-two extracted upper anterior teeth were divided into 3 experimental groups, a positive and negative control. After the root canal treatment, the root ends were resected, retroprepared and retrofilled with either putty, paste + putty or mineral trioxide aggregate (MTA). The teeth were mounted in tubes so the apical 3 mm was submerged in Brain Heart Infusion (BHI) broth. The coronal portions of the canals were inoculated with Enterococcus faecalis and BHI broth and incubated for 30 days. The broth in the tubes was analyzed for colony forming units to check for leakage of bacteria from the canal. The teeth from the groups were sectioned and analyzed using scanning electron microscopy (SEM). The Kruskal-Wallis test and analysis of variance were used to analyze the data with a significance level p < 0.05. Results: The BC-RRM and MTA groups showed similar sealing ability. The positive control showed leakage in all samples. The SEM imaging showed the presence of bacteria in all experimental groups at the material-tooth interface. Conclusions: No significant differences were noted in the experimental groups, providing sufficient evidence that any combination could be effectively used during endodontic microsurgery.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.173-177
• /
• 2019

Thermal properties of a SiO₂-B₂O₃-BaO ternary glass system depending on compositional change of BaO have been examined to find a proper sealing material for reversible oxide cells. Glass transition temperature and thermal expansion coefficients increased simultaneously up to 55 mol% of BaO content. The structural role of BaO with regard to the thermal properties has been discussed on the basis of Raman spectroscopy results. Flowability of the glass at sealing temperature has been examined with packed glass powders of 12 mm diameter along with a high temperature optical microscope. The practical sealing property of the glass was also examined with YSZ coated with NiO-yittria stabilized zirconia (NiO-YSZ) and it showed good adhesion without noticeable reaction with NiO-YSZ layer.

• 한국방재안전학회논문집
• /
• 제15권3호
• /
• pp.101-113
• /
• 2022

본 연구는 도심지 지하 교통망 건설 중 터널굴착 공정에 적용하는 차수 그라우팅 공사의 과학적 및 공학적인 이론적 기반 체계적인 시공 프로세스를 개발하여 상대적으로 낙후된 국내 터널 차수그라우팅 공사의 시공품질을 어느 누가 시공을 하더라도 시공품질이 향상되며 지속적으로 유지하기 위한 목적으로 계획되었다. 개선된 터널 차수그라우팅의 주요내용은 크게 터널 차수그라우팅 적용구분과 그라우팅재료에 대한 정의, 지하수 수압조건의 그라우팅과 지하수유입에 대한 상관관계 분석, 암반의 특성인자연구 및 그라우팅 시공시 필요한 요소기술 및 주입관리기술들에 검토가 될 수 있다. 세계적인 연구의 추세를 살펴보면 이론적 기반 과학 및 공학적인 그라우팅 분야의 연구가 북유럽국가 (스웨덴, 핀란드, 노르웨이 등), 일본, 독일 및 미국 등을 중심으로 활발하게 진행하고 있다. 따라서, 본 연구에서는 터널 차수 그라우팅 시공기술들의 요소들에 대한 이론적인 분석을 통해 알고리즘을 정립하여 터널 차수 그라우팅 시공을 효과적으로 할 수 있는 시공 프로세스를 포함한 통합 솔류션을 제공하는 것이다.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.489-493
• /
• 2016

In this study, the effect of vanadium oxide ($V_2O_5$) content and pre-sintering atmosphere on sealing property of glass frit that consisted of $V_2O_5-BaO-ZnO-P_2O_5-TeO_2-CuO-Fe_2O_3-SeO_2$ was investigated by XPS (X-ray photoelectron spectroscopy). The content of V2O5 was changed to 15, 30, and 45 mol%, and the pre-sintering was carried out in air and $N_2$ condition, respectively. XPS analysis conducted before and after laser irradiation with identical sample. Before laser treatment, glass frits that were pre-sintered at air condition showed both $V^{4+}$ and $V^{5+}$, but the valence state was changed to $V^{5+}$ after laser irradiation when the glass frits contained 30 and 45 mol% $V_2O_5$; this change led to non-adhesive property. On the other hand, glass frits that were pre-sintered at $N_2$ condition exhibited only $V^{4+}$ and it showed fine adhesion irrespective of the $V_2O_5$ content. As a result, the existence of $V^{4+}$ seems to be a major factor for controlling the adhesive property of glass frit for laser sealing.

• 플랜트 저널
• /
• 제6권4호
• /
• pp.63-71
• /
• 2010

The best way to prevent the corrosion of piston rod is a selection of quality of the material and method of construction which minimize the porosity. The high velocity oxy fuel(HVOF) method, which generates lower porosity than existing plasma spray, was applied to ceramic laminated bond layer. Porosity percentage fell to bellow 2%, lower than that of plasma spray at 7%. Coating material of ceramic-coated main layer was selected as the $Cr_2O_3$ affiliation material, which is more dense than $Al_2O_3$ affiliation. To fill up the pores formed after the coating process, we sealed the bond layer and main layer. Sealing process was performed twice, once after the coating and once after the grinding. Upon the anti-corrosion test on the sealed sample and on the non-sealed sample, it is confirmed that the sealed sample was not corroded for 1,000 hours while the non-sealed sample was corroded within 48 hours.

• 한국소음진동공학회논문집
• /
• 제11권7호
• /
• pp.253-260
• /
• 2001

A Study of interior noise reduction in the magelv train is presented. Tarin speed of interest is low such that aero-dynamic noise is negligible and power supply system is a dominant noise source. Based on the measurements of interior noise and acceleration levels during running and zero speed conditions, dominant noise sources are identified. After spectra characteristics of noise sources are investigated several noise reducing methods are studied such as STL increasement of floor panels. sealing. and absorption treatment It is found that the most important noise sources are VVVF inverter and SLM in running condition, whereas air conditioner and DC/DC converter are dominant in zero speed. Sine the major noise sources are under the floor complete sealing and high STL of the floor panel are shown to be the most crucial factors in noise reduction After sound absorbing material, which is polyurethan foam of 50 mm thickness, is thickness, is attached to the downward side of the floor in addition to sealing treatment, the interior noise is reduced by 3~4 dB.

• 한국전기전자재료학회논문지
• /
• 제21권10호
• /
• pp.916-922
• /
• 2008

AC PDP with MgO protective layer coated with the optimum evaporation rate of $5{\AA}/s$ can generate more enhanced efficiency through the vacuum in-line sealing process. However, the optimized process conditions still require the optimum driving scheme on the ramp-up and ramp-down slope of the reset waveform for enhancing the efficiency. In this paper, for the in-situ vacuum sealed PDP with the optimum evaporation rate of MgO protective layer, the address delay time was investigated with various slopes of ramp waveform during a reset ramp-up and ramp-down period. In this study, the minimum statistical delay time was obtained at the ramp-up rate of $6.0 V/{\mu}s$ and the ramp-down rate of $0.7 V/{\mu}s$ of the reset waveform.