Browse > Article
http://dx.doi.org/10.4313/JKEM.2008.21.10.916

A Study on Discharge Characteristics of the PDP Packaged with In-situ Vacuum Sealing with the MgO Protective Layer Deposited by Optimal Evaporation Rate  

Li, Zhao-Hui (경원대학교 전자공학과)
Cho, Eou-Sik (경원대학교 전자공학과)
Kwon, Sang-Jik (경원대학교 전자공학과)
Publication Information
Journal of the Korean Institute of Electrical and Electronic Material Engineers / v.21, no.10, 2008 , pp. 916-922 More about this Journal
Abstract
AC PDP with MgO protective layer coated with the optimum evaporation rate of $5{\AA}/s$ can generate more enhanced efficiency through the vacuum in-line sealing process. However, the optimized process conditions still require the optimum driving scheme on the ramp-up and ramp-down slope of the reset waveform for enhancing the efficiency. In this paper, for the in-situ vacuum sealed PDP with the optimum evaporation rate of MgO protective layer, the address delay time was investigated with various slopes of ramp waveform during a reset ramp-up and ramp-down period. In this study, the minimum statistical delay time was obtained at the ramp-up rate of $6.0 V/{\mu}s$ and the ramp-down rate of $0.7 V/{\mu}s$ of the reset waveform.
Keywords
PDP; MgO; Vacuum In-line sealing; Efficiency; Addressing delay time;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 J. H. Eun, J. H. Lee, S. G. Kim, M. Y. Um, S. Y. Park, and H. J. Kim, "The protection of MgO film against hydration by using $Al_2O_3$ capping layer deposited by magnetron sputtering method", Thin Solid Films, Vol. 435, No. 1-2, p. 199, 2003   DOI   ScienceOn
2 A. Seguin, L. Tessier, H. Doyeux, and S. Salavin, "Measurement of addressing speed in plasma display devices", Proc. IDW'99, p. 699, 1999
3 Q. Yan, N. Kosugi, Y. Oe, H. Tachibana, and L. F. Weber, "Analysis of priming source for addressing discharge of AC PDP", Proc. IDW'06, p. 359, 2006
4 L. F. Weber, "Plasma display challenges", Proc. Asia Display'98, p. 15, 1998
5 K. Sakita, T. Takayama, K. Awamoto, and Y. Hashimoto, "Analysis of. a weak discharge of ramp-wave driving to control wall voltage and luminance in AC-PDPs", SID'00 Dig., p. 110, 2000
6 T. Komaki, H. Taniguchi, and K. Amemiya, "High luminance. AC-PDPs with waffle-structured barrier ribs", Proc. IDW'99, p. 587, 1999
7 H. Uchiike, K. Miura, N. Nakayama, T. Shinoda, and Y. Fukushima, "Secondary electron emission characteristics of dielectric materials in AC-operated plasma display panels", IEEE Trans. Electron. Dev., Vol. 23, No. 11, p. 1211, 1976   DOI   ScienceOn
8 B. Moine and G. Bizarri, "Rare-earth doped phosphors: oldies or goldies?", Mat. Sci. and Eng. B, Vol. 105, No. 1-3, p. 2, 2003   DOI   ScienceOn
9 S. J. Kwon, Y. J. Kim, and S. E. Lee, "Material properties and plasma display panel discharging characteristics depending on MgO evaporation rate", Jpn. J. Appl. Phys., Vol. 45, No. 11, p. 8709, 2006   DOI
10 J. H. Shin and C. H. Park, "Effects of the impurity gases on the characteristics of ac PDP", J. of KIEEME(in Korean), Vol. 15, No. 10, p. 909, 2002
11 G. Oversluizen, S. Zwart, M. F. Gillies, T. Dekker, and T. J. Vink, "The route towards a high efficacy PDP; influence of Xe partial pressure, protective layer, and phosphor saturation", Microelectronics J., Vol. 35, No. 4, p. 319, 2004   DOI   ScienceOn
12 M. Polovic, V. markovix, and S. Mekict, "Electrical breakdown time delay distribution in nitrogen for small values of the afterglow period", J. Phys. D: Appl. Phys., Vol. 24, p. 779, 1991   DOI   ScienceOn
13 M. Makino, E. Mizobata, and K. Toki, "Dependence on a horizontally adjacent cell discharge of addressing discharge time lag in AC PDP cell", Proc. IDW'01, p. 809, 2001