• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1398-1401
• /
• 2004

In case the problem came into the headlight composed of a bulb, lens and reflecting mirror, it has a sealed-beam type which must exchange all and semi-sealed beam type which can exchange only bulb. The headlight of train must be used at the time of going into tunnel and atmospheric phenomena such as heavy snow, rain and foggy as a rule, also it can be used with whistle blow when the dangerous article appears. In this study, general technical specification to improve headlight of the KTX and G7 high speed train is described throughout investigation technique of the industrialized country and headlight specification of train which is on commercial service.

• 한국공간구조학회논문집
• /
• 제2권3호
• /
• pp.103-113
• /
• 2002

This thesis investigates vibration response characteristics of building frames in which dampers are installed. The frames belong to passively vibration-controlled. Structures which utilizes energy dissipation of mechanical dampers provided in the structure. In this thesis, a turbulent flow damper sealed by visco-elastic material was dealt with as the device of passive vibration control. To investigate the resisting force characteristics of the damper, harmonic vibratration tests were carried out. Based on the test results, a theoretical model of the damper resistance was presented and a method of identifying the model parameters was proposed. Shaking table tests of the frame with and without the dampers were carried out and the effectiveness of the damper was examined. The response of the frame with the dampers was reduced to 1/2 or 1/3 of the cases without the damper.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1559-1566
• /
• 1994

Using the finite element method, the contact force, contact band width and temperature distribution of lip seals analyzed for the interference including some nonlinearities such as material nonlinearity, geometrical nonlinearity and nonlinear contact boundary condition. The calculated results showed that the contact stress concentrated on the contact zone between the garter spring and the rubber toward the flex side, the contact edge of lip seals. The high contact forces due to the increased interference separate the sealing gap between the lip edge and the rotating shaft. This may lead to leak the sealed oil.

• 농업과학연구
• /
• 제11권1호
• /
• pp.45-52
• /
• 1984

Changes of chemical componts and populations of total bacteria and lactic acid bacteria were examined during a month-long storage of sweet potatoes crushed and sealed up with polyethylene film at $7-8^{\circ}C$. 1. Changes of starch, total protein, volatile acid and ammonia-nitrogen contents were li 2. In a three days, pH down and increase of non-volatile acid content were notable, populations of total bacteria and lactic acid bacteria were maximum. 3. Vitamic C and soluble sugar contents tended to be reduced during the storage and the leftover were 75-85% and 41-45% respectively. 4. ${\beta}$-Amylase activity decreased gradually and vanished 15-30days. 5. Variations of chemical compontents of the samples inoculated lactic acid bacteria were larger than non- treated to some extent. 6. As above results, mainly homo lactic acid fermentation was done in this storage condition.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.21-23
• /
• 2002

Two sampling methods for chlorofluorocarbons(CFCs) in groundwater were compared and assessed with groundwater samples in Jeju Island. CFCs concentrations from copper tube method were widely variable among triplicates and higher than those from flame-sealed glass ampule method. For the copper tube method, this is aggravated by rubber packings in the faucet of discharge line of wells, which was removed for the glass ampule method. The poor reproducibility and apparent contamination of results by copper tube method is due to the improper sealing of copper tubes and materials in water discharge line. This suggests that it is more difficult to achieve complete isolation from the atmosphere in the copper tube method and that materials that could release CFCs should be avoided along the sampling flow lines. It seems that the flame-sealed glass ampule method is more relevant for groundwater sampling for CFCs though it requires more complicated equipments and procedures.

• Journal of Korean Neurosurgical Society
• /
• 제47권6호
• /
• pp.477-479
• /
• 2010

A case of delayed progressive extradural pneumatocele after microvascular decompression (MVD) is presented. A 60-year-old male underwent MVD for hemifacial spasm; the mastoid air cell was opened and sealed with bone wax during surgery. One month after surgery, the patient complained of tinnitus, and progressive extradural pneumatoceles without cerebrospinal fluid (CSF) leakage was observed. Revision surgery was performed and the opened mastoid air cell was completely sealed with muscle patch and glue. The patient's symptoms were resolved, with no recurrence of pneumatoceles at 6 month follow up. Progressive extradural pneumatocele without CSF leakage after posterior fossa surgery is a very rare complication. Previous reports and surgical management of this rare complication are discussed.

• Tribology and Lubricants
• /
• 제15권4호
• /
• pp.304-313
• /
• 1999

High-speed rotors set a lot of high vibration and stability problems especially when the speed of rotation is going through the first or the second critical speed. The aim of this paper is to investigate the possibility of an active control of a rigid rotor with squeeze film damper which has a good configuration of easily controlled end seal clearances and/or adjustment of a feed pressure. A theoretical method is presented and some numerical results are compared with test measurements. Both results show that the vibration or bit sizes are decreased when the end seal gap decreases with constant supply pressure, and when the supply oil pressure increases with constant seal gap. The experimental results show also a pleasing similarity on both orbit sizes and their decrement ratio compared with theoretical analysis. The possibility of an active control with the squeeze film damper was verified by adjusting the seal gap and the supply pressure.

• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.120-125
• /
• 2006

Inverse pinch 스위치는 기존 스위치와 달리 전극의 손상을 줄이기 위해 나선형 전극형태로 제작하였다. 이 스위치는 전기적 트리거 펄스전압을 인가하여 동작시키며, 본 연구의 실험결과 전극간에 발생되는 아크확산 및 전류이동 때문에 전극수명이 길고, 대전류에도 견디기 때문에 펄스파워 시스템에 사용할 수 있다는 것을 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.105-111
• /
• 2002

New high-performance Ka-band waveguide-to-microstrip transitions for millimeter-wave transceiver applications have been developed and characterized. These transitions are probe-type, but the dielectric material completely covers the whole waveguide aperture, thus providing moisture-barrier and robustness in the probe section. The new probe transitions are also designed to be less sensitive to fabrication tolerances. Further performance enhancements have been obtained by placing vias around the waveguide aperture. Also, the resonance phenomena associated with waveguide wall-penetration have been identified. The developed probe transitions provide insertion loss less than 0.4 dB over entire Ka-band frequencies, but can be optimized for narrowband applications with insertion loss less than 0.2 dB.

• 한국식품저장유통학회지
• /
• 제7권1호
• /
• pp.33-37
• /
• 2000

Effects on keeping quality according to the different package environment in cabbage and brccoli were studied. Opened 2 mil LDPE (low density polyethylene) sealed 4 mil LDPE and BA(barrier polyethylene) were used as package films. Weight loss was markedly in opened 2 mil LDPE in cabbage and broccoli as 6 and 28%, respectively. Carbon dioxide was higher in seal-packaging cabbage and broccoli with BA held at 4 $^{\circ}C$ was above 15 and 31% within 15 days, respectively, while oxygen content was depleted to 2% or less after 10 days. The main difference between volatile sulfur-containing compounds produced from cabbage and broccoli were the relative quantities and rates of production of hydrogen sulfide, carbonyl sulfide, methanethiol and dimethyl disulfide in opened 2 mil LDPE , sealed 4 mil LDPE and barrier bags during storage.