• The Journal of Korean Society for School & Community Health Education
• /
• v.10 no.1
• /
• pp.87-104
• /
• 2009

Objective: In this study, the dental health care knowledge, dental health behaviors and dental health status of elementary school students were compared and analyzed in the cases of their schools having dental health care center or not one. Methods: The target groups were 167 students of A school (experimental group) where pit-and-fissure sealants, fluoride mouthrinsing, and fluoride gel application were carried out with all grades of students by school dental health care center and 158 students of B school (control group) where fluoride mouthrinsing, for all grades students and pit-and-fissure sealants for the first grade students are carried out but have no the school dental health care center. Results: This study was carried out through the answer sheets and recordings of dental inspection. The findings of this study are as follows: 1. The dental health care knowledge was compared and the results showed that on average 14.2$\pm$2.1 in experimental group and 14.0$\pm$1.9 in the control group were no significantly different (p>0.05). 2. The dental health behaviors were compared and the results showed that the experimental group was significantly different(p<0.05) in terms of the number of times of dental brushing a day, the method of tooth brushing, the time of tooth brushing, the experience of tooth brushing with fluorine, the kinds of snacks and tooth brushing in school after lunch. But there was no significant difference(p>0.05) in the time of tooth brushing and the tooth brushing after eating snacks. 3. The DMF rate was compared and the results showed the significantly difference between the average experimental group and 53.8$\pm$5.0 in the control group(p<0.05). 4. The DMFT index was compared and the results showed the significantly difference between the average 0.6$\pm$2 in the experimental group and 1.4$\pm$1.6 in the control group(p<0.05). 5. The DMFI rate was compared and the results showed the significantly difference between the average 4.2$\pm$8.3 in the experimental group and 9.5$\pm$11.0 in the control group. (p<0.05). 6. The DT rate were compared and the results showed the significantly difference between the average 10.2$\pm$29.5 in the experimental group and 32.4$\pm$44.0 in the control group(p<0.05). 7. The FT rate were compared and the results showed the significantly difference between the average 88.5$\pm$31.0 in the experimental group and 67.5$\pm$44.0 in the control group(p<0.05). Conclusions: Based on the results, above there was no significant difference in dental health care knowledge between both the experimental and the control group. But we discovered that the experimental group is better than the other one in dental health care behaviors and dental health status. Therefore, we could conclude that the school dental health care center efficiently carried out the dental care and treatment. As school dental health care centers did not work out efficiently in terms of their educating on the dental health acre knowledge, the related programs to be developed and supported.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.421-430
• /
• 2004

The purpose of this study was to measure and compare the amount of unreacted TEGDMA from pit and fissure sealants cured with three different light sources; conventional halogen light curing unit, plasma arc light curing unit and argon laser. The specimens were eluted in distilled water for different time intervals. The time-related release of TEGDMA were analyzed by reverse-phase high performance liquid chromatography(HPLC). The result of present study can be summarized as follows: 1. The time-related release of TEGDMA decreased with increasing curing time in conventional halogen light, however, that not statistically significant difference(p>0.05). 2. The elution from the specimens cured for 6 and 9 seconds with plasma arc light was similar results corresponding with the time-related TEGBMA release, and was significantly lower than that cured for 3 seconds(p<0.05). 3. The elution of TEGDMA from the specimens cured with argon laser was significantly higher than that cured with halogen and plasma arc light(p<0.05). 4. The elution of TEGDMA from under recommended time of three different light sources were showed to be no statistically significant difference(p>0.05). 5. In time-related release of TEGDMA from recommended time of each light sources, the results correspond to 40 seconds of halogen light and 6 seconds of plasma arc light were similar(p>0.05). 6. The elution of TEGDMA, from over recommended time of three different light sources were showed to be no statistically significant difference(p>0.05). In this study, I suggest that curing time of plasma arc light is 6 and/or 9 seconds in the field of clinical pediatric dentistry claiming its effectiveness in optimal polymerization and reduced chair time.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.321-331
• /
• 2005

The purpose of this study was to compare the effectiveness of mechanical and acid treatment on enamel surfaces for the retention of pit and fissure sealants and evaluate the presence of a prismless layer. The etch pattern produced on enamel from immature and mature premolar teeth extracted with varying period of acid etching using 37% phosphoric acid was examined using a scanning electron microscope(SEM). The composition of each groups was evaluated using an energy dispersive x-ray(EDX) spectroscopy. The result of present study can be summarized as follows: 1. Prismless layer was commonly observed on the fissure enamel in young and mature premolar. 2. There were no differences in micro-structure and etching pattern on fissure enamel between the young and the mature premolar. 3. The most effective etching pattern for retention of pit and fissure sealant was observed in 60 seconds of etching time and no apparent difference of etching pattern was found among 15, 30, and 45 seconds of etching time which showed non-retentive etching patterns. 4. The etching pattern obtained by grinding enamel surface with bur followed by 60 seconds of etching was similar to that of 60 seconds of etching without any pretreatment of fissure surface. 5. Type 2 etching pattern was commonly found on fissure enamel in both young and mature premolar. 6. The calcium content and P/Ca ratio in fissure enamel between the young and the mature premolar were significantly different(P<0.05). But content of calcium, phosphate and P/Ca ratio on various regions of fissure enamel in both young and mature premolar did not showed any difference. Based on these results, prismless layer may negatively influence the retention of pit and fissure sealants. Therefore, the mechanical removal of the prismless layer by grinding prior to etching or by prolonged etching time of enamel within the fissure system should result in an improved bonding of a pit and fissure sealant.

• Journal of dental hygiene science
• /
• v.12 no.2
• /
• pp.139-144
• /
• 2012

Daejeon school-based toothbrushing program using toothbrushing room started at 2007. Ministry of Health and Welfare started national toothbrushing room program without pilot project at 2011. The aim of this study was to provide the basic data to assess of the effect of this program. 59 experimental subjects and 60 control subject were selected after written consent. Oral Examination was done by 1 dentist using WHO standard and Survey of Child Oral Health-Related Quality of Life(COHIP), oral health knowledge and oral health behavior were done using self-registration form. We analyzed the result after adjusting economic status and subjective for the difference between experimental and control groups using SPSS 19.0. The experimental group had lower plaque index, better COHIP and more oral health knowledge significantly(p<0.05). But, The significance was not found in dental caries index and oral health behavior. We suggested the oral health education program and other dental caries prevention program including sealants were needed to prevent dental caries, although school-based toothbrushing program could improve COHIP.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.1
• /
• pp.51-58
• /
• 1999

The effects of glass composition on the wettability and reactivity with $ZrO_2$substrate was evaluated and fabrication variables and glass compositions was investigated. Various glass compositions was investigated. Alkaline earth silicate glass show good wettability and lower viscosity and crystallization of glass could be prevented by $B_2O_3$.The sealant glass begin to wet on $ZrO_2$substrate below $900^{\circ}C$ and porosity occurred in various glass compositions, the crystallization and porosity in the glass could be prevented by the addition of flux into glass composition. But flowability and reactivity of glass with $ZrO_2$substrate was enhanced. Processing variables should be optimized to reduce the porosity by enhancing the sintering of glass powder. Many silicate glasses were investigated for the applications of high temperature sealants. Wetting and bonding of glass was good enough to seal together between $ZrO_2$and other ceramic components of SOFC. But porosity and reaction layer were occurred in the sealant glass. It will be possible to produce glass sealant without porosity and reaction layer at the interface by optimization of processing variable and modify the glass compositions. In present study, wettability of glass-filler composite was investigated. The porosity, shape of filler and interfacial reactions of sealant glass with fillers were examined.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.1
• /
• pp.45-55
• /
• 2020

Objective : Fibrin sealants have been used for hemostasis, sealant for cerebrospinal fluid leakage, and adhesive barrier in neurosurgery. Further, as its clinical use and role of an effective drug delivery vehicle have been proposed. This study was performed to measure antibacterial activity and continuous local antibiotic release from different concentrations of vancomycin-impregnated fibrin sealant in vitro. Methods : Antibacterial activity was investigated by disk diffusion test by measuring the diameter of the growth inhibition zone of bacteria (methicillin-resistant Staphylococcus aureus, ATCC29213) from vancomycin-embedded fibrin sealant disc diluted at five different concentrations (C1-C5; 8.33, 4.167, 0.83, 0.083, and 0.0083 mg/disc, respectively). Continuous and conditioned release of vancomycin concentration (for 2 weeks and for 5 days, respectively) were also measured using high-performance liquid chromatography (HPLC) method. To mimic the physiologic wound conditions with in vitro, conditioned vancomycin release in phosphate buffer solution (PBS) was measured and replaced PBS for five consecutive days, half a day or completely daily. Results : In the disk diffusion test, the mean diameters of bacterial inhibition zone were 2.54±0.07 cm, 2.61±0.12 cm, and 2.13±0.15 cm (C1, C2, and C3 respectively) but 1.67±0.06 cm and 1.23±0.15 cm in C4 and C5, respectively. Continuous elution test elicited the peak release of vancomycin from the fibrin sealant at 48 hours, with continued release until 2 weeks. However, conditioned vancomycin release decreased to half or more on day 2, however, the sustainable release was measured over the therapeutic dose (10-20 ㎍/mL) for 5 days and 4 days in assays of half and total exchange of PBS. Conclusion : This study suggests that fibrin sealant can provide an efficient vehicle for antibiotic drug release in a wide range of neurosurgical procedures and the safe and effective therapeutic dose will be at the concentration embedded of 4.167 mg/disc or more of vancomycin.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.299-306
• /
• 2018

The aim of this study was to evaluate the effect of etching time and bonding agents on bond strength of sealant applied to the occlusal surface of primary molars. Forty non-carious exfoliated human primary molars were included in the study. The teeth were randomly divided into 4 groups for measurement. For group I, no acid etching treatment was used. For group II, III, and IV, acid etching gels were applied on the occlusal surface for 15, 30, and 60 seconds, respectively. Each group was divided into 2 subgroups; one group was treated with bonding agents on the enamel while the other was not. Microtensile bond strength was evaluated using a universal testing machine. There were no statistically significant differences in bond strength with varying duration of etching among groups. The results revealed that the use of bonding agents prior to application of fissure sealant increased the bond strength(p < 0.05). It could be concluded that etching time greater than 15 seconds does not significantly enhance the bond strength, but the use of bonding agents as an intermediate layer between the primary molar and fissure sealant would be beneficial in increasing the bond strength.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.387-394
• /
• 2011

This study was performed to investigate the contents and leaching characteristics of hazardous wastes from the paint industry. In order to establish a hazardous waste list, samples from industrial discharge have been analyzed for 8 non-regulated inorganic hazardous substances (i.e., Sb, Ni, F, V, Ba, Zn, Be, Se). In more detail, hazardous waste samples from a total of 64 workplaces, e.g. manufacture, formulation, supply and use (MFSU) of coatings, adhesives, sealants and printing inks processing, have been chosen and analyzed. Contents and leaching tests for inorganic metal species in samples show that the non-regulated hazardous substances satisfy all the criteria, while quantitative analyses reveal that some samples of the discharged wastes exceeded the criteria proposed by NIER (National Instituted of Environmental Research). In conclusion, we expect the outcome of this study to align the classification system of hazardous waste management in South Korea with international legislations, and consequently contribute to reduce environmental pollution as well as health risks by toxic wastes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.949-956
• /
• 2016

There are a number of effects by solar radiation in many aerospace industrial fields, such as degradation of mechanical properties, sealing effect of sealants or decolorization. Because it takes long time to investigate these effects by using the light of natural state, new methods are developed for accelerating this phenomenon. In this paper, we developed an apparatus to simulate accelerated solar radiation phenomenon selecting irradiation intensity $1,120W/m^2$ as the designed environment. Epoxy polymer as the composite material was chosen and processed by ASTM-D638, a reference for tensile test of polymer and plastic. Total color shift was selected as the test category to evaluate acceleration of the test. We obtained acceleration factors and numerical model from test data and concluded it can shorten test periods by accelerated irradiation intensity of $1,120W/m^2$.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.4
• /
• pp.633-642
• /
• 2006

This study evaluated the surface changes such as surface average roughness(RA), surface free energy(SFE) and wear depth among groups treated with surface penetrating sealant(Fortify, Biscover), non treated polishing group before and after tooth-brushing, analyzing the influence of the sealants in filling of surface microdefects formed during the finishing and polishing procedures of composite resin. Results were as follow(p= 0.05) : 1. Ra was increased Biscover. Fortify and Polishing group. Before abrasion and in 6 months, all groups were statistically significant. In 1 month, 2 months and 3 months no statistical difference was noticed between Fortify and Biscover 2. SFE of Polishig and Biscover group. Fortify and Biscover group were statistically significant before abrasion. SFE of Polishing and Fortify group was statistically significant in 1 month. No statistical difference was noticed among groups in 2 months. SFE of Fortify and Biscover group was statistically significant in 3 months. Polishing and Fortify group, Fortify and Biscover group were statistically significant in 6 months. 3, Wear rate between Polishing and Fortify group was statistically significant in only 1 month. Wear rate between Polishing and Biscover group was statistically different in each month except for 2 month and so it was between Fortify and Biscover group. Considering film thickness of Fortify and Biscover, Fortify almost discappeared after 2 months and Biscover did after 6 months.