• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.16-19
• /
• 2003

This paper describes research on mental commit robot that seeks a different direction from industrial robot, and that is not so rigidly dependent on objective measures such as accuracy and speed. The main goal of this research is to explore a new area in robotics, with an emphasis on human-robot interaction. In the previous research, we categories robots into four categories in terms of appearance. Then, we introduced a cat robot and a seal robot, and evaluated them by interviewing many people. The results showed that physical interaction improved subjective evaluation. Moreover, a priori knowledge of a subject has much influence into subjective interpretation and evaluation of mental commit robot. In this paper, 133 subjects evaluated the seal robot, Paro by questionnaires in an exhibition at the National Museum of Science and Technology in Stockholm, Sweden. This paper reports the results of statistical analysis of evaluation data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.651-656
• /
• 2003

This paper describes research on mental commit robot that seeks a different direction from industrial robot, and that is not so rigidly dependent on objective measures such as accuracy and speed. The main goal of this research is to explore a new area in robotics, with an emphasis on human-robot interaction. Mental commit robots provide psychological, physiological, and social effects to human beings through physical interaction. In the previous research, we categorized robots into four categories in terms of appearance. Then, we introduced a cat robot and a seal robot, and evaluated them by interviewing many people. The results showed that physical interaction improved subjective evaluation. Moreover, a priori knowledge of a subject has much influence into subjective interpretation and evaluation of mental commit robot. In this paper, 95 subjects evaluated the seal robot, Paro by questionnaires in an exhibition at the Japan cultural institute in Rome, Italy for 4 days from June 25th to 28th, 2003. This paper reports the results of statistical analysis of evaluation data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.49.4-49
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Seal Robot: Paro $\textbullet$ Placebo Seal Robot $\textbullet$ Health Service Facility for Aged $\textbullet$ Robot Assisted Activity $\textbullet$ Discussions $\textbullet$ Conclusion

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2502-2507
• /
• 2003

In this paper, a crack sealing robot is developed. The crack sealing robot is built to detect, track, and seal the crack on the pavement. The sealing robot is required to brush all dirt in the crack out for preparing a better sealing job. Camera calibration has been done to get accurate crack position. In order to perform a cleaning job, the explicit force control method is used to regulate a specified desired force in order to maintain constant contact with the ground. Experimental studies of force tracking control are conducted under unknown environment stiffness and location. Crack tracking control is performed. Force tracking results are excellent and the robot finds and tracks the crack very well.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.374-381
• /
• 2016

The sealing technique is widely used for repairing the cracks on the surface of concrete and preventing their expansion in the future. However, it is difficult to ensure the safety of the workers when sealing large structures in inconvenient working environments. This paper presents the development of a sealing robot system to seal various shapes of concrete surface in rough conditions for a long time. If the robot can maintain the desired contact force, the cracks can be completely sealed. An impedance force tracking controller with slope estimator is proposed to calculate the surface slope in real time using the robot position. It predicts the next point in order to prevent the robot from disengaging from the contact surface owing to quick slope changes. The proposed method has been verified by experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1077-1081
• /
• 2003

In this paper, experimental studies of force tracking control for the crack sealing robot are presented. Crack sealing robot is built to detect, track and seal the crack on the pavement. Before sealing, crack must be detected by a laser sensor and a camera sensor, then cleaned for a better sealing job. In order to maintain contact with the ground force control is required to brush all dirt in the crack out for preparing sealing cracks with tars. Impedance control algorithm is presented to regulate a specified desired force. Experimental studies of the proposed force control algorithm are conducted under unknown environment stiffness and location. Performances of force control algorithm are stable and excellent.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.888-894
• /
• 2016

This paper presents the kinematic and dynamic analysis of the robot arm for inspection and rescue operations. The inspection robot arm has Pitch-Pitch-Pitch-Yaw motion for an optimal and stable view of the camera installed at the end of the manipulator. The rescue operation robot arm has Yaw-Pitch-Pitch-Roll motion to handle heavy tools. Additionally, both robot arms are waterproof, as they use the triple-layer O-ring. Furthermore, the dynamic equation including the damping force due to the mechanical seal for waterproofness was derived by using the Newton-Euler method. A control system using the ARM processor was developed and introduced in this paper, and its performance was verified through experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.648-657
• /
• 2014

This paper is about the study on a newly developed small waterproofed 4-axis robot arm and the analysis of its kinematics and dynamics. The structure of robot arm is designed to have Pitch-Pitch-Pitch-Yaw joint motion for inspection using a camera on itself and the joint actuator driving capacity are selected and the joint actuators are designed and test for 10m waterproofness. The closed-form solution for the robot arm is derived through the forward and inverse kinematics analysis. Also, the dynamics model equation including the damping force due to the mechanical seal for waterproofness is derived using Newton-Euler method. Using derived dynamics equation, a sliding mode controller is designed to track the desired path of the developed robot arm, and its performance is verified through a simulation.