• 제목/요약/키워드: sea-island micro fiber

검색결과 3건 처리시간 0.015초

해도형(海島型) PET 초극세섬유의 알칼리 가수분해에 관한 연구 (A Study on the Alkali Hydrolysis of Sea-island PET Ultra-microfiber)

  • 서말용;이준희;옥치민;조성훈;이종우;조호현
    • 한국염색가공학회지
    • /
    • 제25권4호
    • /
    • pp.303-313
    • /
    • 2013
  • Alkali hydrolysis of sea-island PET 0.02denier microfiber were compared to those on the fabrics of the 0.06denier microfiber. In the dissolution of the sea component out of sea island type ultra-microfiber, it is important to determine the optimum division and divided material. Weight reduction of sea island ultra-micro sea island fiber was faster than regular PET about 10 times. Also 0.2denier sea-island ultra-micro sea island fiber has better color fastness (washing, friction, and daylight) than 0.06denier level sea-island ultra-microfiber. In this study, 0.2denier ultra-micro sea island fiber shows the possibility of high value product.

0.01d 폴리에스테르 초극세 섬유의 염색성 및 역학적 성질 (Dyeing and Mechanical Properties of 0.01d Polyester Ultramicro Fiber)

  • 박재민;정동석;노환권;류현재;이문철
    • 한국염색가공학회지
    • /
    • 제18권6호
    • /
    • pp.10-15
    • /
    • 2006
  • In this article, effect of the dyeing and mechanical properties were investigated on the polyester ultramicro fiber(UMF) and knitted fabric varying fiber fineness(0.01d and 0.05d). By a treatment with NaOH solution, sea-ingredient was removed and polyester micro-fiber was revealed. The dyeing, build-up and fastness properties of the fiber and fabrics were observed. We used C.I. Disperse Red 60 and Blue 56 for dyeing property and eight Lumacron dyes for build-up property and colorfastness. At low temperature dyeing($100^{\circ}C$), the dyeing rate of 0.01d-polyester UME increased more than that of 0.05d-polyester UMF with Disperse Red 60 and Blue 56 whereas dyeing rate of 0.05d-polyester UMF were increased more than that of 0.01d-polyester UMF at high temperature($120^{\circ}C$), The colorfastnesses of the 0.05d-fiber knitted fabric such as washing, rubbing and light was higher than those of the 0.01d-fiber knitted fabric.

기모가공 조건에 따른 트리코 기포 인조 스웨이드의 태와 물성 (Subjective Hand and Physical Properties of Tricot based Artificial Suede according to Raising Finish)

  • 노의경;오경화
    • 한국의류산업학회지
    • /
    • 제16권1호
    • /
    • pp.153-159
    • /
    • 2014
  • This study evaluates the changes of the subjective hand, preference, comfort and mechanical properties of tricot based artificial suede made from sea-island type micro fibers according to raising condition. The subjective hand and the preference of raised suede for jacket were rated by the 20's and 30's women experts according to raising cycles. Comfort properties were evaluated by air permeability, water vapor transmission, and thermal transmission. Mechanical properties were measured by the KES-FB system. The subjective hand of artificial suede was categorized into three hand factors: smoothness, warmness and thickness. Smoothness, warmness and thickness perception increased with raising cycles which affected hand preference and luxuriousness perception. The thickness and wale density of suede increased with the number of raising. Suede became more compact and less pliable and less stretchable due to increased fabric thickness; in addition, the surface of suede became smoother and compressive since the surface evenness of suede improved with smaller fiber fineness and an increased amount of naps covered the base fabric. Furthermore, water vapor transmission decreased and thermal insulation increased. The best raising conditions for artificial suede was four cycles in which artificial suede was preferred without changes in physical properties.