• 제목/요약/키워드: sea water immersion

검색결과 40건 처리시간 0.025초

침지된 해수 온도 및 결합재 혼합비에 따른 비소성 시멘트의 강도 특성 (Properties of Non-Sintered Cement Pastes Immersed in Sea Waters at Different Temperatures for Binders Mixed with Different Ratios)

  • 전유빈;김태완
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제20권5호
    • /
    • pp.75-84
    • /
    • 2016
  • 본 연구에서는 해수 침지 온도에 따른 비소성 시멘트 경화체의 물리적 및 역학적 특성에 대해 비교 분석하였다. 비소성 시멘트는 플라이애시와 고로슬래그미분말을 6:4, 7:3 및 8:2의 중량비로 혼합하여 수산화나트륨과 액상규산나트륨으로 알칼리 활성화 하여 제작되었다. 알칼리 활성화를 위한 활성화제는 플라이애시와 고로슬래그미분말을 혼합한 중량의 5%로 하였으며, 화학첨가제로 탄산칼슘이 사용되었다. 본 연구에서는 알칼리 활성화된 시험체들을 3가지 다른 온도($5^{\circ}C$, $15^{\circ}C$$25^{\circ}C$)의 해수에 각각 침지 시킨 후, 침지 재령 3일 및 28일에 대해 경화체의 압축 강도, 밀도 및 흡수율을 측정하였으며, 해수 침지 재령 28일에 대해서는 XRD 및 SEM 시험 분석을 실시하였다. 또한, 해수 침지 재령 28일에 대하여 시험체들 내의 수용성 염화물(자유염화물) 및 산-가용성 염화물(총염화물) 함유량을 측정하여 분석하였다. 본 연구에서 해수온도별로 침지시킨 플라이애시-고로슬래그미분말 혼합 알칼리 활성화 경화체는 플라이애시 혼합률이 증가함에 따라 밀도 감소, 흡수율 증가 및 강도가 감소하는 경향을 나타냈다. 또한 플라이애시 혼합률이 증가할수록 시험체 내의 수용성 염화물 및 산-가용성 염화물의 양이 증가하는 것으로 나타났다. 본 연구에서 제작된 플라이애시-고로슬래그미분말 혼합 알칼리 활성화 경화체는 노출된 해수 온도 영향으로 인한 강도 차이는 없는 것으로 판단되며, 플라이애시와 고로슬래그미분말의 혼합중량비에 따라 강도 특성이 달라지는 것으로 나타났다.

바이오플락 환경에서 넙치(Paralichthys olivaceus)의 에드워드병에 대한 항생제 치료 효과 (Effect of antibiotics treatment for edwardsiellosis of olive flounder Paralichthys olivaceus in biofloc environment)

  • 박정준;김석렬
    • 한국어병학회지
    • /
    • 제34권2호
    • /
    • pp.225-231
    • /
    • 2021
  • In biofloc culture for olive flounder, Paralichthys olivaceus, the possibility of antibiotics treatment was investigated against edwardsiellosis. After inducing edwardsiellosis by immersion in Edwardsiella tarda 1.2 × 105/mL suspension, the survival trends on various biofloc water management and some physiological changes were observed. For biofloc water management, six types of water treatments were carried out, which were no exchange without antibiotics as negative control, the exchange to stored biofloc water, the exchange to stored biofloc water with 20% flow-through, the exchange to fresh biofloc water, half fresh biofloc water and half sea water, and the complete flow-through. There was no significant physicochemical change on water qualities in any type. The exchange to fresh biofloc water was shown the highest survival ratio as 72.3%, and in case of stored biofloc water with 20% flow-through, the survival ratio was also significantly high as 62%. Plasma glucose, cholesterol, total protein, calcium, and magnesium were analyzed as physiological index. Mostly, there was no significant change, but plasma cholesterol showed an initial decrease in low survival group, and an initial increase with high survival group. Consequently, antibiotic treatment against a bacterial disease during biofloc culture is possible as long as the biofloc water management follow along properly.

The Utility of Non-Invasive Nasal Positive Pressure Ventilation for Acute Respiratory Distress Syndrome in Near Drowning Patients

  • Kim, June Hyeong;Sun, Kyung Hoon;Park, Yong Jin
    • Journal of Trauma and Injury
    • /
    • 제32권3호
    • /
    • pp.136-142
    • /
    • 2019
  • Purpose: Near drowning refers to immediate survival after asphyxia due to submersion or immersion in water, which is a crucial public safety problem worldwide. Acute lung injury or acute respiratory distress syndrome (ARDS) is a common complication of near drowning. The purpose of this study was to investigate the feasibility and effectiveness of noninvasive nasal positive pressure ventilation (NINPPV). Methods: This retrospective study was conducted at a tertiary emergency department. NINPPV was administered for moderate ARDS caused by submersion or immersion in patients who were older than 18 years, from January 2015 to December 2018. We collected the demographic (age, sex, length of hospital stay, and outcome), laboratory (arterial blood gas, lactate, oxygen saturation, partial pressure of oxygen divided by the fraction of inspired oxygen, complete blood count, blood urea nitrogen, and creatinine), and clinical data (acute lung injury index and ventilator failure) of the patients. A statistical analysis was performed using Statistical Package for the Social Sciences version 20.0 for Windows. Results: NINPPV treatment was provided to 57 patients for near drowning, 45 of whom (78.9%) were successfully treated without complications; in 12 (21.1%), treatment was changed to invasive mechanical ventilation within 48 hours due to ARDS or acute kidney injury. NINPPV treatment was successful in 31 (75.6%) out of 41 sea-water near drowning patients. They were more difficult to treat with NINPPV compared with the fresh-water near drowning patients (p<0.05). Conclusions: NINPPV would be useful and feasible as the initial treatment of moderate ARDS caused by near drowning.

FRP 어선 보수에 적용되는 겔코트의 해수 침투 방지 효과 (The Prevention Effect of Seawater Penetration of Gel Coat Applied in Repair of FRP Fishing Vessel)

  • 강대곤;박재학
    • 한국안전학회지
    • /
    • 제33권6호
    • /
    • pp.15-21
    • /
    • 2018
  • Ships may collide with reefs or other objects during operation, when arriving or departing ports. The hull plate may be damaged due to the contact with other ships. The total number of domestic powered fishing vessels has decreased, but that of FRP fishing vessels has increased by 0.7% and the ratio of FRP fishing vessels to the total fishing vessels increased to 96%. Recently, fishing vessels has been used as fishing boats for income of non-fishermen as well as fishermen. Therefore, safety management for repair and maintenance is necessary. The penetration of moisture and moisture in the composite material such as FRP may deteriorate the mechanical properties and the salt (NaCl) component of the damaged portion may cause a relatively high deterioration in material strength. The gel coat painting is the final stage of repairs ans maintenance of FRP fishing vessels. The thickness criteria in the domestic and foreign gel coat is 0.3~0.762 mm. The joint specimens, which was immersed in seawater for 120 days, were compared with those without seawater immersion. As a result, the tensile strength was 83 ~ 121.8% and the flexural strength was 83 ~ 113% compared with the specimens without seawater immersion. According to the previous study the tensile strength decreased by more than 29% and the flexural strength decreased by more than 50% when the composite material was immersed in seawater for 1,083 hours without coating. As a result, it was found that the gel coat with 0.5 mm thickness is very effective in preventing the strength decrease of the composite material.

탄소섬유 강화 복합재료의 수분에 의한 열화 및 회복에 관한 연구 (A Study on Degradation in the Moisture Environment and Recovery of Carbon Fiber Reinforced Composites)

  • 서상하;이덕보;문창권
    • Composites Research
    • /
    • 제17권3호
    • /
    • pp.8-14
    • /
    • 2004
  • 이 연구는 탄소섬유 강화 복합재료를 사용하여 해수, 수돗물 및 증류수와 같은 여러 가지 수분환경에 침지 시켜 수분 흡수가 기계적 성질에 미치는 영향에 대해서 검토한 것이다. 또한 일정시간 수분환경에 침지 한 후에 건조시켜, 그 전후의 기계적 성질의 변화도 검토하였다. 그 결과, 흡수율은 수분환경에서의 침지 시간에 주로 의존하며, 일정시간 침지 후에 상온건조에 의해서 흡수율은 감소하는 것을 알았다. 인장강도는 수분 흡수율이 증가함에 따라 감소했으며 일정시간 침지 시킨 후에 건조에 의해서 인장강도는 어느 정도 회복하는 경향을 보였다.

Modeling of Fine Sediment Transport under Multiple Breakwaters of Surface-Piercing Type

  • Lee, J. L.;Oh, M. R.
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2004년도 학술발표회
    • /
    • pp.557-562
    • /
    • 2004
  • A surface-piercing barrier model is presented for understanding morphological development in the sheltered region and investigating the main factors causing the severe accumulation. Surface-piercing structures like vertical barriers, surface docks and floating breakwaters are recently favored from the point of view of a marine scenario since they do not in general partition the natural sea. The numerical solutions are compared with experimental data on wave profiles and morphological change rates within a rectangular harbor of a constant depth protected by surface-piercing thin breakwaters as a simplified problem. Our numerical study involves several modules: 1) wave dynamics analyzed by a plane-wave approximation, 2) suspended sediment transport combined with sediment erosion-deposition model, and 3) concurrent morphological changes. Scattering waves are solved by using a plane wave method without inclusion of evanescent modes. Evanescent modes are only considered in predicting the reflection ratio against the vertical barrier and energy losses due to vortex shedding from the lower edge of plate are taken into account. A new relationship to relate the near-bed concentration to the depth-mean concentration is presented by analyzing the vertical structure of concentration. The numerical solutions were also compared with experimental data on morphological changes within a rectangular harbor of constant water depth. Through the numerical experiments, the vortex-induced flow appears to be not ignorable in predicting the morphological changes although the immersion depth of a plate is not deep.

  • PDF

황을 포함한 유기화합물인 NaDDTC의 CuNi합금에 대한 화학적 흡착에 관한 정량적 분석 (Quantitative Analysis on Chemisorption of NaDDTC as Organic Compound containing Sulfur for Cu-Ni Alloy)

  • 정길봉;김동영;장요한
    • 한국군사과학기술학회지
    • /
    • 제18권5호
    • /
    • pp.548-557
    • /
    • 2015
  • This paper is results on Chemisorption of organic compound for the sea water fire fighting line of naval vessels. The quantitative analysis of Chemisorption has been investigated in seawater after immersion in 0.1 % of NaDDTC solutions for 43 hours. The morphology and topography were investigated by FE-SEM and AFM. The chemical elements were analyzed by SEM-EDS, XPS and the depth of chemical elements was measured by depth profiles. The effect of NaDDTC comes from Chemisorption between Copper and Sulfur of NaDDTC. As a result, test results showed that sulfur is helpful to protect a corrosion of seawater line.

환경열화에 의한 철도차량 구조용강의 부식 특성 (Corrosion Characterestic of Rolling Stock Structural Steel by Environmental Degradation)

  • 김용기;장세기;오창록;구병춘
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 추계학술대회 논문집
    • /
    • pp.680-685
    • /
    • 2004
  • The effects of acid rain and salt content on corrosion behavior were investigated with rolling stock structural steels be caused by environmental. Since these materials are exposed to the corrosive environments like polluted air, acid rain and sea water, it is important to investigate corrosion behaviour in various corrosive environments. The aqueous corrosion of the characteristic materials in aerated acid rain and neutral solution were studied by using immersion tests, electrochemical measurements and analytical techniques. In order to examine corrosion characteristic, structural steels were electrochemically evaluated with respect to the dissolved oxygen content, pH, chloride ion concentration.

  • PDF

전차선로 가선재의 수용액 부식 특성 (The Aqueous Corrosion Characteristics of Catenary Materials of Electric Railway System)

  • 김용기;장세기;조성일;이재봉
    • 한국철도학회논문집
    • /
    • 제4권2호
    • /
    • pp.62-70
    • /
    • 2001
  • Pure copper, Cu-1.1wt%Cd and ACSR(Aluminum Conductor Steel Reinforced) have been used as catenary materials of the electric railway system. Since these materials may be exposed to the corrosive environments like polluted air, acid rain and sea water, it is important to investigate the corrosion rates in various corrosive environments. The aqueous corrosion characteristics of catenary materials in aerated acid, neutral and alkali solutions were studied by using immersion corrosion tests, electrochemical measurements and analytical techniques. In order to examine corrosion characteristics according to the dissolved oxygen content, pH, chloride ion concentration ion, and the addition of Cd to Cu, a series of tests such as potentiodynamic polarization, a.c impedance spectroscopy and galvanic corrosion tests were carried out with these materials. Results showed that the addition of Cd to Cu and chloride ion in the solution have an adverse effects on the resistance to corrosion. Additionally, Galvanic currents between Al and steel wires of ACSR were confirmed by using ZRA(zero resistance ammeter) method.

  • PDF

해조분말을 이용한 생분해성 필름의 제조 (Preparation of Bio-degradable Films Using Various Marine Algae Powder)

  • 임종환;김지혜
    • 한국식품과학회지
    • /
    • 제36권1호
    • /
    • pp.69-74
    • /
    • 2004
  • 해조분말을 이용하여 산 알칼리 병용법으로 알긴산을 추출하고 필름의 물성 증진을 위하여 두 가지의 $CaCl_{2}$ 처리방법 (즉, $CaCl_{2}$를 필름용액에 직접 첨가하는 방법과 필름을 제조한 후 필름을 $CaCl_{2}$, 용액에 침지하여 가교결합을 유도하는 방법)을 적용하여 생분해성 필름을 제조하고 그 물성을 비교하였다. 사용된 해조분말(미역 잎, 미역줄기, 미역귀, 다시마, 톳)중 톳을 제외하고는 모두 필름이 제조되었다. 이들 해조 필름의 물성에 대한 $CaCl_{2}$ 처리방법의 영향은 수분용해도 외에는 큰 차이를 나타내지 않았다. 비록 이들 해조필름의 인장강도, 투습도, 수분용해도와 같은 필름의 물성이 순수한 알긴산으로 제조한 필름의 물성에 비해 떨어지나 본 연구의 결과는 미이용 해조분말이나 해조가공 부산물로 얻어지는 해조분말을 이용하여 새로운 생분해성 포장소재로 사용할 수 있는 가능성이 있음을 나타냈다.