• 제어로봇시스템학회논문지
• /
• 제20권4호
• /
• pp.443-448
• /
• 2014

Soft errors in memory devices that caused by radiation are the main threat from a reliability point of view. This threat can be commonly overcome with the combination of SEC (Single-Error Correction) codes and scrubbing technique. The interleaving architecture can give memory devices the ability of tolerating these soft errors, especially against multiple-bit soft errors. And the interleaving distance plays a key role in building the tolerance against multiple-bit soft errors. This paper proposes a reliability model of an interleaved memory device which suffers from multiple-bit soft errors and are protected by a combination of SEC code and scrubbing. The proposed model shows how the interleaving distance works to improve the reliability and can be used to make a decision in determining optimal scrubbing technique to meet the demands in reliability.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1101-1105
• /
• 2011

Radiation particles can introduce temporary errors in memory systems. To protect against these errors, so-called soft errors, error detection and correcting codes are used. In addition, scrubbing is applied which is a fundamental technique to avoid the accumulation of soft errors. This paper introduces an optimal scrubbing scheme, which is suitable for a system with auto error detection and correction logic. An auto error detection and correction logic can correct soft errors without CPU's writing operation. The proposed scrubbing scheme leads to maximum reliability by considering both allowable scrubbing load and the periodic accesses to memory by the tasks running in the system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.677-680
• /
• 2011

우주 방사선은 메모리 시스템에 소프트 에러를 야기할 수 있다. 소프트 에러는 오류 검출 및 정정 코드를 이용하여 극복될 수 있으며, 소프트 에러의 누적을 방지하기 위하여 스크러빙 작업이 병행되어야 한다. 본 논문은 CPU의 쓰기 동작 없이 소프트 에러를 정정할 수 있는 자가 오류 검출 및 정정 회로가 적용된 메모리 시스템에 적용할 수 있는 최적 스크러빙 수행 방안을 제안한다. 제안된 스크러빙 방안은 시스템의 가용한 스크러빙 로드와 시스템에서 실행되는 태스크의 주기적 메모리 접근을 함께 고려하여 최대의 신뢰도를 성취할 수 있도록 하여준다.

• 한국분무공학회지
• /
• 제18권2호
• /
• pp.81-86
• /
• 2013

To comply with the regulation of the reinforcing Clean Air Conservation Act, it is necessary for the semiconductor manufacturers to develop effective low-concentration acid gas abatement system to treat the flue gas. The low-concentration acid gas was found to be harder to deal with than the high-concentration one. In this study, the effect of various potential treatments such as air-assist nozzle spraying, magnetizing the scrubbing water, and adding surfactants to spraying and scrubbing water were investigate through the application of the statistical ANCOVA method, which was proved to be very useful tool when the inlet concentration of acid gas could not be controlled precisely and it affected the removal efficiency of the abatement system.

• 한국대기환경학회지
• /
• 제22권2호
• /
• pp.259-266
• /
• 2006

A dual-channel glass coil sampling technique was used to measure hourly formaldehyde concentration in the ambient air. The dual-channel coil sampling assembly consists of three parts; an all-pyrex 28-turn coil made of 0.2-cm internal diameter glass tubing for gas-liquid contact and scrubbing of soluble gases, an inlet section upstream of the coil for introducing sample air and scrubbing solution, and a widened glass section downstream of the coil for gas-liquid separation. The scrubbing solution used was a dilute aqueous DNPH (dinitrophenylhydrazine) solution. Hourly concentration of formaldehyde was determined at a Gwangju semi-urban site during two intensive studies between September and October using the dual channel glass-coil/DNPH sampling technique and HPLC (High Performance Liquid Chromatography) analysis. The mean concentration was 1.7($0.4{\sim}4.7$) and 3.0($0.5{\sim}19.1$) ppbv for the September and October intensives, respectively, which are considerably low, compared to those measured in polluted urban areas around the world including several urban areas of Korea. The diurnal variation showed significant increase of formaldehyde in the daytime suggesting the dominance of formation of formaldehyde due to photochemical oxidation of methane and other hydrocarbons. An increase in the formaldehyde sometimes in the night might be due to an increase in primary source, i.e. traffic emissions. It was also found that rapid increase in formaldehyde levels from 3.0 to 19.1 ppbv in the afternoon on October 20 was due to plumes from burning of agricultural wastes such as rice straw and stubble. It is expected from the measurement data that the constructed dual-channel glass coil sampling system can be utilized for measuring atmospheric concentration of the formaldehyde with high time resolution.

• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1953-1961
• /
• 2014

Increasing public concerns over odors and air regulations necessitates the remediation of a wide range of odor substances for industrial and indoor purpose. Currently, the wet scrubbing technique by neutralization using oils is being used to treat odor substances such as Ammonia($NH_3$), Methyl Mercaptan($CH_3SH$), Hydrogen Sulfide($H_2S$), Methylamine($CH_3NH_2$), Acetaldehyde($CH_3CHO$). The chemical analysis is performed to analyze the composition of an Arctium Lappa Root extract by VOC analyzer(Phocheck 5000Ex, ION SCIENCE co.) The objectives of the this study are to clarify the possibility of the neutralization of odors sprayed in the fixed bed and determine the removal efficiencies for different input odor concentrations. It is found that Ammonia($NH_3$), Methyl Mercaptan($CH_3SH$), Hydrogen Sulfide($H_2S$), Methylamine($CH_3NH_2$), Acetaldehyde($CH_3CHO$) are significantly removed and their removal efficiencies are higher than 98%. The kitchen detergent with Arctium Lappa Root extract showed excellent removal efficiencies of odor substances and high possibility for the development of kitchen detergent with odor removal.

• KSBB Journal
• /
• 제22권3호
• /
• pp.151-156
• /
• 2007

본 논문은 식물정유를 이용해 유해가스를 처리하는 경우에 식물정유의 주요 구성성분을 파악하고 이를 통해 처리효율을 규명하는데 연구하였다. 또한 식물정유와 메틸 멀캅탄 악취가스에 의한 메틸 멀캅탄 악취가스 제거반응 메카니즘을 규명하였으며 그 결과는 아래와 같다. 1) 악취가스 중 메틸 멀캅탄 악취가스는 식물정유 추출물과 중화반응에 의해 처리될 수 있음을 나타내었다. GC-MS분석에 의한 식물정유 추출물의 성분 중 식물정유의 화학구조는 알코올기, 케톤기, 에스터기가 관여하는 것으로 나타났다. 충전탑내 식물추출물의 순환속도의 실험결과에서 중화반응으로 메틸 멀캅탄 악취가스가 제거되는 메카니즘은 앞서 언급한 화학작용기와 메틸 멀캅탄 악취가스의 중화반응에 의해 염을 형성하여 제거되는 과정을 갖는다. 2) 메틸 멀캅탄 악취가스 제거효율은 식물정유 추출물의 희석비와 스프레이 분무속도 그리고 초기 메틸 멀캅탄 악취가스 농도 등에 따라 달라질 수가 있음을 알 수 있었다. 시험결과는 식물정유 추출물의 희석비와 스프레이 분무속도 그리고 초기 메틸 멀캅탄 악취가스 농도가 희박한 경우에 최대 98%의 제거효율을 얻을 수가 있었다.

• 에너지공학
• /
• 제28권4호
• /
• pp.8-12
• /
• 2019

Thermal amine scrubbing is the most advanced CO₂ capture technique but its largescale application is hindered due to the large heat requirement during solvent regeneration step. The addition of a solid metal oxide catalysts can optimize the CO₂ desorption rate and thus minimize the energy consumption. Herein, we evaluate the solvent regeneration performance of Monoethanolamine (MEA) and Diethanolamine (DEA) solvents without and with two metal oxide catalysts (TiO₂ and V₂O₅) within a temperature range of 40-86℃. The solvent regeneration performance was evaluated in terms of CO₂ desorption rate and overall amount of CO₂ desorbed during the experiments. Both catalysts improved the solvent regeneration performance by desorbing greater amounts of CO₂ with higher CO₂ desorption rates at low temperature. Improvements of 86% and 50% in the CO₂ desorption rate were made by the catalysts for MEA and DEA solvents, respectively. The total amount of the desorbed CO₂ also improved by 17% and 13% from MEA and DEA solvents, respectively. The metal oxide catalyst-aided regeneration of amine solutions can be a new approach to minimize the heat requirement during solvent regeneration and thus can remove a primary shortfall of this technology.

• 공업화학
• /
• 제29권1호
• /
• pp.10-17
• /
• 2018

반도체 및 디스플레이 제조공정 중에 화학기상증착(CVD), 식각(etching), 세정(cleaning) 공정에서 배출되는 과불화합물(PFCs)를 포함한 폐 가스 처리를 위해서 POU (point of use) 가스 스크러버 시스템을 도입하여 사용하고 있다. 과불화합물은 지구온난화 지수(GWP, global warming potential)와 대기 중 자연분해되는 기간(lifetime)이 $CO_2$에 비해 수천 배 높은 온실가스로 분류되어 있으며, 과불화합물의 열분해를 위해서는 3,000 K 이상의 고온이 요구되는 것이 일반적이다. 이러한 특징 때문에 과불화합물을 효과적으로 제어하기 위한 방법으로 열플라즈마 기술을 도입하고자 하는 노력들이 진행되어 왔으며, POU 가스 스크러버 기술을 개발하여 산업적으로 이용하고자 하였다. 열플라즈마 기술은 플라즈마 토치 기술, 전원공급장치 기술 및 플라즈마 토치-전원공급장치 매칭 기술 최적화를 통해 안정적으로 플라즈마 발생원을 유지시키는 것이 중요하다. 또한, 과불화합물 고효율 처리를 위한 고온의 플라즈마와 폐 가스의 효과적인 혼합이 주요 기술요인으로 확인되었다. 본 논문에서는 반도체 및 디스플레이 공정 폐 가스 처리를 위한 후처리 공정에 대한 기술적 정보를 제공함과 동시에 POU 플라즈마 가스 스크러버에 대한 기술개발 동향을 파악함으로써 향후 연구개발이 요구되는 핵심사항에 대해 논의하고자 한다.