• 제목/요약/키워드: scroll

Search Result 378, Processing Time 0.041 seconds

A Study on Low Noise Cooling/Ventilation System for Large Electric Motor (대형 전동기 냉각/통풍 시스템의 저소음화 연구)

  • Jo, Hye-Young;Jang, Ji-Sung;Kim, Dong-Hae
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2014.10a
    • /
    • pp.973-974
    • /
    • 2014
  • 대형 전동기의 주요 소음원은 전자기 소음과 냉각/통풍 시스템 소음이며, 이 중 냉각/통풍 시스템이 전체 소음에 큰 영향을 미친다. 본 논문에서는 대형 전동기의 저소음 냉각/통풍 시스템 개발을 위해 저소음 냉각 팬을 개발하고 팬 커버 내부의 유로를 개선하였다. 유동해석은 상용 CFD 소프트웨어를 이용하였으며 팬 커버 내의 scroll 형상 및 air guide, baffle 의 유무에 따라 팬 커버의 압력손실을 계산하였다. 해석을 통해 팬 커버 내부의 난류 유동과 압력손실이 가장 작은 팬 커버 형상을 도출하였으며 개선된 냉각/통풍 시스템이 기존 냉각/통풍 시스템보다 6.5dB 감소된 것을 확인하였다.

  • PDF

Lubrication Characteristic of a Disk Type Wave Thrust Bearing (Wave가 있는 원판형 추력베어링의 윤활특성)

  • 박태조;제태진;이운섭
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2002.10a
    • /
    • pp.888-891
    • /
    • 2002
  • This paper presents the lubrication characteristics of a disk type wavy thrust bearing. The hydrodynamic pressure distributions in the fluid film are numerically solved the Reynolds equation and then the bearing load capacity and friction forces acting on the disk are calculated. Especially the effects of number and amplitude of the circumferential waves are investigated for tilted operating conditions. The results showed that the load capacity increases with wave amplitude and optimum wave number exists for given design conditions. Therefore the results can be applied to enhance the lubrication performance of thrust bearing adopted in the scroll compressor.

  • PDF

Experimental Investigation on the Performance of a Scroll Expander for an Organic Rankine Cycle (유기랭킨사이클(ORC)을 위한 주전열면 열교환기의 채널주름비에 따른 유동 및 열전달특성)

  • Sung, Min-Je;Ahn, Joon
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.26 no.4
    • /
    • pp.158-162
    • /
    • 2014
  • A series of numerical simulation has been carried out to study thermo-hydraulic characteristics of a primary surface type heat exchanger, which is designed for the evaporator and condenser of a geothermal ORC. Working fluid is geothermal water at hot side and R-245fa, which is a refrigerant designed for ORC, at cold side. Amplitude ratio of the channel and Reynolds number are considered as design parameters. Nusselt number is presented for the Reynolds number ranging from 50 to 150 and compared to analytic solutions. The result shows that higher amplitude ratio channel gives better heat transfer performance within the range of investigation.

Optimum Design of a Cross Flow Fan (횡류팬의 최적설계방안)

  • Kim D. H.;Park H. K.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2003.08a
    • /
    • pp.176-181
    • /
    • 2003
  • The cross-flow fans are widely used in various applications, due to their large capacity of mass flow and the size compactness. The flow fields of the cross-flow fan is, however, complex and it has many design parameters. Thus the general design guide has not sufficiently established yet, and the design strategies of cross-flow fans have been based on experiments. In the present study, the cross-flow fan performance and its two-dimensional flow characteristics are numerically analyzed by using the STAR-CD. The simulation is done by varying the several design parameters such as impeller blade shapes, the gap between the stabilizer and impeller. The computational results are compared with the experimental data at the fan outlet region. Finally some helpful guides for the optimum design of the cross-flow fan are proposed.

  • PDF

Study on Difference of Characteristics between Backward and Forward Blades in Centrifugal Blower (원심형 송풍기에 있어서 전향익과 후향익의 특성 차이에 관한 연구)

  • Kim J. W.;Park J. W.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2003.08a
    • /
    • pp.165-170
    • /
    • 2003
  • Centrifugal blowers are widely used for air handling units in industry applications. The blower has a centrifugal impeller and a scroll casing including a driving component such as an electric motor. The impeller takes forward or backward blades to induce flows into the blower. Comprehensive investigation according to the two kinds of blades is systematically carried out for a guidance of design. It is observed that flow rate of the blower with forward blades is larger than that of the system with backward blades. The reason is due to larger velocity from the rotating forward blades and the tendency is validated by a parallel experiment with a wind tunnel. Numerical analysis for the system shows detail information inside the blades and the casing. A series of figures to show the flow details offers deep understanding of a centrifugal blower with different blades.

  • PDF

Development of A Horizontal Scroll Arcade Mobile Game Using Cocos2d-x (2D 그래픽 프레임워크 Cocos2d-x 기반 횡 스크롤 아케이드 모바일 게임 개발)

  • Choi, Ji-Hyun;Youn, Hee-Yong
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2014.01a
    • /
    • pp.469-472
    • /
    • 2014
  • 본 논문은 멀티 플랫폼을 지원하는 Cocos2d-x를 기반으로 하여 Android와 iOS에서 구동하는 네이티브앱의 개발 모델을 제안하고 실제로 구현한 횡 스크롤 모바일 게임을 기술한다. 모바일 게임 장르 중 아케이드 장르가 대중성과 중독성도 있는 만큼 사용자의 비율이 가장 높은 것을 바탕으로 2d 그래픽 프레임워크 Cocos2d-x 기반 가속도 센서를 이용하여 횡 스크롤 아케이드 모바일 게임을 개발하였다.

  • PDF

An Experimental Study on the Oil Circulation in an Inverter-Driven Heat Pump (인버터 열펌프내 오일순환량에 관한 실험적 연구)

  • 민만기;홍기수;황윤제;황일남;김철민;조관식
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.12 no.8
    • /
    • pp.717-724
    • /
    • 2000
  • It is important to investigate characteristics of flow of refrigerant/oil mixture circulating in a refrigeration system. Therefore the oil concentration in refrigerant/oil mixture should be measured exactly by the adequate measuring instrument. In this paper, the oil concentration was measured by density monitoring system(DMS) in the liquid-line of a inverter-driven heat pump. Experimental result follows ; the main factor that have an effect on oil concentration refrigerant/oil mixture circulating in a refrigeration system is the momentum and kinematic viscosity of refrigerant/oil mixture compressed by scroll compressor.

  • PDF

Experimental and Theoretical Studies on the Dynamic Characteristics During Speed Down of Inverter Heat Pump

  • Hwang, Yoon-Jei;Kim, Ho-Young
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • v.8 no.1
    • /
    • pp.29-39
    • /
    • 2000
  • A series of tests were performed to verify the transient characteristics of heat pump in heating and cooling mode when operating speed was varied over the 30 to 102Hz. One of the major issues that has not been addressed so far is transient characteristics during speed modulation. The model for cycle simulation has been developed to predict the cycle performance under conditions of decreasing drive frequency and the results of the theoretical study were compared with the results of the experimental study. The simulated results were in good agreement with the experimental result within 10%. The transient cycle migration of the liquid state refrigerant causes significant dynamic change in system. Thus, the migration of refrigerant was the most important factor whenever do experimental results analysis or develop simulation model.

  • PDF

Multi-objective Topology Optimization of Single Phase Induction Motor Considering Electromangetics and Heat Transfer (전자기와 열전달을 고려한 단상유도모터의 다분야 위상최적설계)

  • Shim Hokyung;Moon Heegon;Wang Semyung;Kim Myungkyun
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.770-772
    • /
    • 2004
  • This paper presents a new approach regarding thermal characteristics associated with a design of the high efficiency motor. The adjoint variable design sensitivity equations for both electromagnetics with respect to permeability and heat transfer considering conduction and convection terms are derived using the continuum method. For multi-objective topology optimization, FEA is validated in terms of electromagnetics and heat transfer by experiments. The proposed method is applied to a single-phase induction motor of the scroll compressor in order to control the direction of heat flow by maximizing/minimizing the temperature of the target area while maintaining the efficiency.

  • PDF

Design and Implementation of a Synchronous Web Browser Sharing System for Web-based Collaborative Computing (웹 기반의 협동작업을 위한 동기적 웹 브라우저 공유 시스템의 설계 및 구현)

  • 김문석;이성제;성미영
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2000.10b
    • /
    • pp.227-229
    • /
    • 2000
  • 공간적으로 분산되어 있는 여러 작업자들이 웹 상에서 실시간으로 협력 연구할 수 있도록 하기 위해서는 기본적으로 협동작업 지원 도구인 화상회의, 전자칠판의 지원뿐만 아니라 동기적 웹 브라우저의 공유 또한 필수적이다. 본 논문에서 소개하는 동기적 웹 브라우저의 공유 시스템에서는 협동 작업자들이 주소 동기화(URL Synchronization) 및 폼 동기화(Form Synchronization)를 통해서 워드 및 파워포인트와 같은 웹 문서와 웹 데이터베이스의 내용을 공유할 수 있고 브라우저의 내용이 길어질 경우에도 스크롤 동기화(Scroll Synchronization) 및 윈도우 크기 동기화(Window Size Synchronization)를 통해 문서내의 같은 부분을 공유할 수 있다. 본 논문에서는 공간적으로 분산되어 있는 여러 작업자들이 협동작업을 위해서 상용 웹 브라우저를 이용하여 웹 문서와 웹 데이터베이스를 공유함으로써 보다 효율적인 작업을 할 수 있는 시스템을 소개한다.

  • PDF