• Archives of Plastic Surgery
• /
• 제41권6호
• /
• pp.679-685
• /
• 2014

Background Frontal sinus fractures, particularly anterior sinus fractures, are relatively common facial fractures. Many agree on the general principles of frontal fracture management; however, the optimal methods of reduction are still controversial. In this article, we suggest a simple reduction method using a subbrow incision as a treatment for isolated anterior sinus fractures. Methods Between March 2011 and March 2014, 13 patients with isolated frontal sinus fractures were treated by open reduction and internal fixation through a subbrow incision. The subbrow incision line was designed to be precisely at the lower margin of the brow in order to obtain an inconspicuous scar. A periosteal incision was made at 3 mm above the superior orbital rim. The fracture site of the frontal bone was reduced, and bone fixation was performed using an absorbable plate and screws. Results Contour deformities were completely restored in all patients, and all patients were satisfied with the results. Scars were barely visible in the long-term follow-up. No complications related to the procedure, such as infection, uncontrolled sinus bleeding, hematoma, paresthesia, mucocele, or posterior wall and brain injury were observed. Conclusions The subbrow approach allowed for an accurate reduction and internal fixation of the fractures in the anterior table of the frontal sinus by providing a direct visualization of the fracture. Considering the surgical success of the reduction and the rigid fixation, patient satisfaction, and aesthetic problems, this transcutaneous approach through a subbrow incision is concluded to be superior to the other reduction techniques used in the case of an anterior table frontal sinus fracture.

• 대한치과교정학회지
• /
• 제40권4호
• /
• pp.250-259
• /
• 2010

상악 구치의 후방이동을 위한 구강 내 장치 중 환자의 협조를 필요로 하지 않는 방법은 제II급 부정교합의 개선에 성공적으로 널리 사용되고 있다. 본 연구는 스크류에 의해 지지되는 구강 내 후방이동 장치를 소개하고 그 효율성을 조사하고자 하였다. Angle Class II 부정교합으로 진단된 21명의 환자(여자 11명, 남자 10명; 평균 연령 14.9세)를 대상으로 하였다. 2개의 스크류를 incisive foramen 후방에 식립하고, 식립한 즉시 힘을 주어 상악 제1대구치의 후방이동에 사용하였다. 상악 구치를 후방이동시켜 제I급 구치관계를 얻기 위해 스크류에 의해 지지되는 구강 내 후방이동 장치를 사용하였다. 치료 전후 측모두부 방사선 사진과 3차원 모델 분석을 통해 골격 및 치아의 변화를 평가하였다. 연구결과 상악 구치는 평균 3.95 mm 후방이동하였고, 추가적인 고정원 소실 없이 제I급 구치관계를 확립하였다. 상악 대구치는 $1.49^{\circ}$ 후방경사 되었고, 회전된 정도는 좌우 각각 $0.74^{\circ}$, $0.54^{\circ}$으로 통계적으로 유의성 있는 변화를 보이지 않았다 (p > 0.05). 새롭게 고안된 장치는 스크류에 의해 지지되어 환자의 협조도를 요하지 않으며 특별한 고정원 소실 없이 구치의 치체이동을 통한 후방이동을 얻는 데 효과적인 것으로 판단된다.

• 대한족부족관절학회지
• /
• 제12권1호
• /
• pp.26-30
• /
• 2008

Purpose: The authors evaluated the differences between K-wires and Bold screw for fixing the proximal metatarsal chevron osteotomy of moderate and severe hallux valgus. Materials and Methods: There were 59 patients (81 feet) who were moderate and severe degree hallux valgus according to the classification of Mann. They all got the proximal chevron osteotomy when correcting the deformity. All patients were followed up at least 6 months. We divided the patients into 2 groups, K-wires fixed group as A, Bold screw fixed group as B. Group A were 42 patients (63 feet) and Group B were 18 patients (19 feet). Among the Group B, 2 feet who were failed to fix the oetotomy site with Bold screw, were fixed with K-wires during operation. We measured the AOFAS score preoperatively, postoperatively and at final follow-up, VAS score at 2 weeks after the operation. Also preoperative, postoperative and follow-up hallux valgus angle (HVA) and intermetatarsal angle (IMA) were measured for each patients. Results: Mean follow up period was 1.34 year (range: 6 months-6.16 years). Mean VAS score of group A was $3.21{\pm}1.7$ and group B $1.76{\pm}1.0$. Preoperative mean AOFAS score of group A was $45.61{\pm}8.3$, group B $44.41{\pm}8.9$, the final mean score of group A was $88.87{\pm}8.3$ and group B $92.47{\pm}4.4$. Preoperative mean HVA was $30.82{\pm}6.6$ degrees in group A and $32.88{\pm}14.5$ degrees in group B, the final mean angle of group A was $14.89{\pm}8.3$ degrees and group B $17{\pm}4.4$ degrees. The preoperative mean IMA of group A was $13.69{\pm}3.6 $degrees and group B $12.35{\pm}5.2$, the final mean angle of group A was $9.26{\pm}3.6$ degrees and group B $12.35{\pm}5.8$ degrees. Conclusion: There were no statistical differences in radiologic and clinical results (p>0.05) but, group B exceeded group A in VAS score (p=0.0007) and had no statistical significance in terms of reduction angle loss (p=0.06). Early returning to normal life activity may be possible for patients using Bold screws.

• Journal of Korean Neurosurgical Society
• /
• 제58권1호
• /
• pp.50-53
• /
• 2015

Objective : The purpose of this study was to evaluate radiographic/clinical outcomes of adolescent idiopathic scoliosis (AIS) patients treated by a Korean neurosurgeon. Methods : Ten AIS patients were treated by a single neurosurgeon between January 2011 and September 2013 utilizing segmental instrumentation with pedicle screws. Basic demographic information, curve pattern by Lenke classification, number of levels treated, amount of correction achieved, radiographic/clinical outcomes [by Scolisis Resarch Society (SRS-22r) questionnaire] and complications were evaluated to determine the surgical results. Pulmonary function test was utilized to assess forced vital capacity (FVC) and forced expiratory volume in one second (FEV1) before and after surgery. Results : The average percentage of correction of the major structural curve was 73.6% (ranged from 64% to 81.5%). Preoperative and final postoperative absolute FVC averaged 3.03 L and 3.76 L (0.73 L increase, p=0.046), and absolute FEV1 averaged 2.63 L and 3.49 L (0.86 L increase, p=0.021). Preoperative and final postoperative average self-image and function scores of SRS-22r were, $2.6{\pm}0.5$, $3.3{\pm}0.1$, $4.0{\pm}0.5$, and $4.6{\pm}0.0$, respectively. There was a significant improvement of the self-image and function scores of SRS-22r questionnaires before and after surgery (p<0.05). There was no case of neurological deficit, infection and revision for screw malposition. One patient underwent a fusion extension surgery for shoulder asymmetry. Conclusion : Radiographic/clinical outcomes of AIS patients treated by a Korean neurosurgeon were acceptable. Fundamental understanding of pediatric spinal deformity is essential for the practice of AIS surgery.

• Journal of Korean Neurosurgical Society
• /
• 제61권4호
• /
• pp.503-508
• /
• 2018

Objective : Anterior odontoid screw fixation is a safe and effective method for the treatment of odontoid fractures. The surgical technique is recommended for perforation of the apical cortex of the dens by the lag screw. However, overpenetration of the apical cortex may lead to potentially serious complications such as damages of adjacent vascular and neural structures. The purpose of this study was to assess the role of three-dimensional computed tomography (CT) scan to evaluate the safe margin beyond dens tip to ventral dura for anterior odontoid screw fixation. Methods : We retrospectively analyzed the three-dimensional CT scans of the cervical spines in 55 consecutive patients at our trauma center. The patients included 38 males and 17 females aged between 22 and 73 years (mean age${\pm}$standard deviation, $45.8{\pm}14.2years$). Using sagittal images of 3-dimensional CT scan, the safe margins beyond dens tip to ventral dura as well as the appropriate screw length were measured. Results : The mean width of the apical dens tip was $9.6{\pm}1.1mm$. The mean lengths from the screw entry point to the apical dens tip and posterior end of dens tip were $39.2{\pm}2.6mm$ and $36.6{\pm}2.4mm$. The safe margin beyond apical dens tip to ventral dura was $7.7{\pm}1.7mm$. However, the safe margin beyond the posterior end of dens tip to ventral dura was decreased to $2.1{\pm}3.2mm$, which was statistically significant (p<0.01). There were no significant differences of safe margins beyond dens tip to ventral dura with patient gender and age. Conclusion : Extension by several millimeters beyond the dens tip is safe, if the trajectory of anterior odontoid screw is targeted at the apical dens tip. However, if the trajectory of the screw is targeted to the posterior end of dens tip, extension beyond dens tip may lead to damage immediately adjacent to the vental dura mater.

• 대한의용생체공학회:의공학회지
• /
• 제26권2호
• /
• pp.123-127
• /
• 2005

Compression Hip Screw (CHS) is one of the most widely-used prostheses for the treatment of intertrochanteric fractures because of its strong fixation capability. Fractures at the neck and screw holes are frequently noted as some of its clinical drawbacks, which warrant more in-depth biomechanical analysis on its design variables. The purpose of this study was to evaluate changes in the strength with respect to the changes in design such as the plate thickness and the number of screw holes. Both mechanical test and FEM analysis were used to systematically investigate the sensitivities of the above-mentioned design variables. For the first part of the mechanical test, CHS (n=20) were tested until failure. The CHS specimens were classified into four groups: Group Ⅰ was the control group with the neck thickness of 6-㎜ and 5 screw holes on the side plate, Group Ⅱ 6-㎜ thick and 8 holes, Group Ⅲ 7.5-㎜ thick and 5 holes, and Group Ⅳ 7.5-㎜ thick and 8 holes. Then, the fatigue test was done for each group by imparting 50% and 75% of the failure loads for one million cycles. For the FEM analysis, FE models were made for each group. Appropriate loading and boundary conditions were applied based on the failure test results. Stresses were assessed. Mechanical test results indicated that the failure strength increased dramatically by 80% with thicker plate. However, the strength remained unchanged or decreased slightly despite the increase in number of holes. These results indicated the higher sensitivity of plate thickness to the implant strength. No fatigue failures were observed which suggested the implant could withstand at least one million cycles of fatigue load regardless of the design changes. Our FEM results also supported the above results by showing a similar trend in stress as those of mechanical test. In summary, our biomechanical results were able to show that plate thickness could be a more important variable in design for reinforcing the strength of CHS than the number of screw holes.

• Journal of Yeungnam Medical Science
• /
• 제3권1호
• /
• pp.361-366
• /
• 1986

1985년 3월부터 1986년 6월까지 영남대학교 의과대학 정형외과학교실에서 10예의 주상골 골절환자에 나사를 사용하여 치료하였으며 그 결과를 요약하면 다음과 같다. 10예중 신선골절이 2예였고 불유합 골절이 8예이었다. 불유합 골절의 경우 수상후 수술시까지 기간이 최단 5개월에서 5년이었다. 수술후 고정기간은 평균 4주였으며 4주후 능동적 운동을 시행하여 고정기간의 단축으로 관절운동 회복은 매우 양호하였다. 골유합을 보인 사기는 8예에서 3개월에서 9개월 사이였으며 2예에서는 9개월 후에도 방사선상 골절선은 볼 수 있었다. 골절선이 남아있는 경우도 임상적으로는 증세의 호전(동통, 관절 운동)을 나타내었다.

• Journal of Yeungnam Medical Science
• /
• 제11권2호
• /
• pp.284-292
• /
• 1994

1992년 12월부터 1994년 6월까지 영남대학교 의과대학 부속병원 정형외과에 내원한 대퇴골두무혈성 괴사 환자 28명, 31 고관절에 대해 시행한 경전자간 회전 절골술의 결과는 다음과 같다. 1. 대상 환자는 한명을 제외하고는 모두 남자였으며, 평균 연령은 44.3세로 삼, 사십대가 대부분이었다. 2. 무혈성 괴사의 원인은 과다한 음주에 의한 것이 18례로 가장 많았고, 괴사의 정도는 Ficat와 Arlet의 분류에 의하면 II a가 16례로 가장 많았다. 3. 절골술 후 고정 방법으로는 screw가 15례, DHS가 16례였고, 고정 방법에 따른 대퇴경간각의 변화로는, screw를 사용한 경우는 술전에 비해 내반고 되는 경향을 보였고, DHS를 사용한 경우는 외반고 되는 경향을 보였다. 4. 술전 대퇴골두 측면 방사선 사진에서 측정한 대퇴골두 전체 관절면에 대한 건전한 관절면의 비는 1/3이하가 8례, 1/3 이상이 23례(74%)이었다. 5. 술후 고관절의 전후면 방사선 사진에서 측정한 비구의 체중 부하면에 대한 전위된 건전한 대퇴골두의 관절면 비는 36% 이상이 24례(78%), 21-35%가 6례, 20% 이하가 1례였다.

• Journal of Korean Neurosurgical Society
• /
• 제42권4호
• /
• pp.311-316
• /
• 2007

Objective : The objective of this study is to investigate the safety, surgical efficacy, and advantages of a polyaxial screw-rod system for posterior occipitocervicothoracic arthrodesis. Methods : Charts and radiographs of 32 patients who underwent posterior cervical fixation between October 2004 and February 2006 were retrospectively reviewed. Posterior cervical polyaxial screw-rod fixation was applied on the cervical spine and/or upper thoracic spine. The surgical indication was fracture or dislocation in 18, C1-2 ligamentous injury with trauma in 5, atlantoaxial instability by rheumatoid arthritis (RA) or diffuse idiopathic skeletal hyperostosis (DISH) in 4, cervical spondylosis with myelopathy in 4, and spinal metastatic tumor in 1. The patients were followed up and evaluated based on their clinical status and radiographs at 1, 3, 6 months and 1 year after surgery. Results : A total of 189 screws were implanted in 32 patients. Fixation was carried out over an average of 3.3 spinal segment (range, 2 to 7). The mean follow-up interval was 20.2 months. This system allowed for screw placement in the occiput, C1 lateral mass, C2 pars, C3-7 lateral masses, as well as the lower cervical and upper thoracic pedicles. Satisfactory bony fusion and reduction were achieved and confirmed in postoperative flexion-extension lateral radiographs and computed tomography (CT) scans in all cases. Revision surgery was required in two cases due to deep wound infection. One case needed a skin graft due to necrotic change. There was one case of kyphotic change due to adjacent segmental degeneration. There were no other complications, such as cord or vertebral artery injury, cerebrospinal fluid leak, screw malposition or back-out, or implant failure, and there were no cases of postoperative radiculopathy due to foraminal stenosis. Conclusion : Posterior cervical stabilization with a polyaxial screw-rod system is a safe and reliable technique that appears to offer several advantages over existing methods. Further biomechanical testings and clinical experiences are needed in order to determine the true benefits of this procedure.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권5호
• /
• pp.407-416
• /
• 2008

Purpose: The aim of the present study is to evaluate the effect of repetitive distraction and compression on new bone formation during distraction period. Materials and methods: Sixteen healthy rabbits, weighing about 2.5kg, were used in this experiment. A unilateral mandibular osteotomy was performed in the left mandible and the distractor(Track 1 $plus^{(R)}$, Gebruder Martin $GmbH^{(R)}$, Germany) was fixed with four screws (Cross driver screw $TI^{(R)}$, Gebruder Martin $GmbH^{(R)}$, Germany). After 4 days, the mandibles were distracted at a rate of 0.6mm/day for 10 days to obtain the amount of 6mm distraction in the control group(n=4). In the experimental group A(n=6), they were distracted at a rate of 1.2mm/day for 5 days and then compression of 0.6mm length and distraction of 0.6mm per 12 hours were carried out as counter direction for 5 days, relatively. In the experimental group B(n=6), distraction of 1.2mm length and compression of 0.6mm length per 12 hours were repeated for 10 days to obtain the amount of 6mm distraction finally. The experimental animals were sacrificed at 2 and 4 weeks after surgery and block specimens were obtained. With histologic and histomorphometric analysis, we observed the histologic changes of the cells and bone formation after H-E and Masson- Trichrome staining and then, measured Bone Deposition Rate with TOMORO $ScopeEye^{TM}$ ver. 3.5(Olympus, Japan), Results: Histologically, new bone formation was examined in all experimental groups and the control. But, the ability of bone formation of the experimental group A was somewhat better than any other groups. On the histomorphometric analysis, Bone Deposition Rate was higher in the experimental group A$(50.67{\pm}4.36%)$ than in the control group$(45.94{\pm}3.97%)$ and in the experimental group B$(42.68{\pm}5.70%)$. These data showed significant differences statistically(p<0.05). Conclusion: These results show that the distraction osteogenesis using repetitive compression and distraction force in the early consolidation period may be effective for new bone formation.