• 대한정형외과학회지
• /
• 제54권4호
• /
• pp.327-335
• /
• 2019

목적: 골다공증성 척추 압박 골절 환자에서 척추경 나사못을 이용한 고정술을 시행 시 골시멘트(polymethylmethacrylate) 보강의 방사선적 효용성에 대해 조사하고자 하였다. 대상 및 방법: 골다공증성 압박 골절에서 골시멘트 보강술을 이용한 척추경 나사 고정을 시행한 20예의 환자가 연구에 포함되었다. 평균 추시 기간은 15.6개월이었으며, 인구학적인 자료, 골밀도(bone mineral density, BMD), 유합 분절, 척추경 나사의 사용 개수 및 골시멘트 주입량은 의무기록을 통하여 검토되었다. 방사선적인 결과를 산출하기 위하여 시간 순차적(수술 전, 수술 직후, 술 후 6주, 술 후 3, 6개월 및 술 후 1년) 추시를 통해 방사선적 지표를 측정하였다. 결과: 본 연구에 총 20명의 환자(여자 16예[80.0%]; 평균 나이, 69.1±8.9세)가 포함되었다. 평균 BMD는 -2.5±0.9 g/cm², 각각의 추체당 평균 골시멘트 주입량은 6.3 ml였다. 술 전 측정한 후만각(Cobb angle)은 32.7°±7.0°였으며, 술 후 측정값은 8.7°±6.9° (p<0.001)로 큰 호전을 나타내었고, 교정은 술 후 시간 순차적인 추시에서도 유지됨을 보였다. 기구 고정 후 후만각, 설상각, 시상지표 또한 유사한 호전 양상을 나타내었다. 또한 골절된 추체의 전방 높이 또한 수술 전 11.0±5.0 mm에서 수술 후 18.5±5.7 mm (p=0.006)로 호전되었고 3, 6개월 및 1년간의 추시 간에도 유지됨이 확인되었다. 결론: 골다공증성 압박 골절에서 골시멘트 보강술을 이용한 척추경 나사 고정은 효과적인 치료법이라 생각되며, 이 술식을 통해 국소 흉요추부 후만의 충분한 교정을 얻을 수 있고 술 후에도 잘 유지할 수 있는 방법으로 골다공증 척추 압박 골절 환자에서 유용한 술식으로 생각된다.

• 대한정형외과학회지
• /
• 제56권1호
• /
• pp.51-60
• /
• 2021

목적: 요수근 관절 탈구는 고에너지 손상에 의해 발생하며 요골 경상돌기 골절 및 단요월상인대 손상을 동반한다. 단요월상인대는 요골 부착부에서 파열되기도 하지만 요골 월상골와의 전방연에서 견열 골편을 동반하여 발생하기도 한다. 이 연구의 목적은 요골 경상돌기 골절이 동반된 요수근 관절 탈구에서 단요월상인대의 손상 형태 및 치료 방법에 따라 결과의 차이가 있는지 알아보고자 한다. 대상 및 방법: 요수근 관절 탈구로 수술을 시행한 18명을 대상으로 하였다. 요수근 관절 탈구는 Dumontier 등의 방법을 이용하여 Group 1 (순순한 탈구 또는 요골의 작은 견열 골절)과 Group 2 (주상골와의 1/3 이상을 침범한 요골 경상돌기 골절)로 분류하였다. Group 2는 단요월상인대의 부착부가 파열되거나 작은 견열 골절을 동반한 경우를 2A, 비교적 큰 견열 골절을 동반하여 내고정이 가능한 경우를 2B로 분류하였다. 전자는 단요월상인대의 직접 봉합으로, 후자는 작은 나사를 이용한 견열 골편의 내고정으로 치료하였다. 최종 추시에서 통증, 관절 운동 범위와 파악력, 영상 검사를 확인하였다. 치료 결과는 patient-rated wrist evaluation(PRWE), modified Mayo wrist score (MMWS)를 이용하여 평가하였다. 결과: 모든 증례는 Group 2 (2A 6명, 2B 12명)로 분류되었다. 굴신 운동 범위는 건측의 79%, 파악력은 72.9%를 보였다. Group 2A가 2B보다 신전/굴곡/회전에서 더 큰 운동 범위를 보였다. 요사위/척사위/회외전과 통증, 파악력 회복은 차이는 없었다. PRWE, MMWS에서는 두 군의 차이가 없었다. 합병증으로 외상성 관절염 7예, 관절 불안정 5예가 있었다. 결론: 단요월상인대가 손상될 때 요골 월상골와의 전방연에서 발생한 견열 골절은 치료 결과에 영향이 없었다. 그러나 견열 골편이 전위되거나 회전되어 탈구의 정복을 방해하기 때문에 주의해야 하며, 골편에 부착하는 단요월상인대의 기능을 복원하기 위해 해부학적 정복과 견고한 내고정이 필요하다.

• 대한두개안면성형외과학회지
• /
• 제11권2호
• /
• pp.85-90
• /
• 2010

Purpose: The goals of a blow-out fracture reconstruction are to restore the osseous continuity, provide support for the orbital contents and prevent functional and anatomic defects. Over the past several years, a range of autogenous and synthetic implants have been used extensively in orbital reconstructions. None of these implants have any absolute indications or contraindications in certain clinical settings. However, in extensive blow-out fractures, it is difficult to restore support of the orbital contents, which can cause more complications, such as enophthalmos. This study examined the clinical outcomes of extensive or comminuted blow-out fractures that were reconstructed by the simultaneous use of a titanium mesh plate and $Medpor^{(R)}$. Methods: Eighty six patients with extensive orbital fractures, who were admitted between March 1999 and February 2007, were reviewed retrospectively. The patients' chart and CT were inspected for review. Twenty three patients were operated on with both a titanium mesh plate (Matrix MIDFACE pre-formed orbital plate, Synthes, USA) and $Medpor^{(R)}$ (Porex, GA, USA). The patients underwent pre-operative CT scans to evaluate the fracture site and measure the area of the fracture. A transconjunctival approach was used, and titanium mesh plates were inserted subperiosteally with screw fixation. $Medpor^{(R)}$ was inserted above the titanium mesh plate. The patients were evaluated post-operatively for enophthalmos, diplopia, sensory disturbances and eyeball movement for a period of at least 6 months. Results: No implant-related complications were encountered during the follow-up period. Enophthalmos occurred in 1 patient, 1 patient had permanent sensory disturbance, and 3 patients complained of ocular pain and fatigue, which recovered without treatment. Although there were no significance differences between groups, the use of 2 implants had fewer complications. Therefore, it can be an alternative method for treating blow out fractures. Conclusion: The use of both a titanium mesh plate and $Medpor^{(R)}$ simultaneously may be a safe and acceptable technique in the reconstruction of extensive blow-out fractures.

• 한국임상수의학회지
• /
• 제23권3호
• /
• pp.291-299
• /
• 2006

During long bone lengthening, there are many disadvantages including axial deviation, malalignment and re-fracture which are commonly encountered inspite of its proven abilities. To study the effects of intramedullary K-wire application on the lengthening of long bone, ten skeletally mature mongrel dogs were separated into two groups(Group I, II). Right femurs of group I(5 dogs) were fixed with only monolateral external fixator after subperiosteal osteotomy. Right femurs of group II(5 dogs) were fixed with mono lateral external fixator and intramedullary K-wire after subperiosteal osteotomy. Lengthening was started at 7 days after the surgery with the rate of 0.5 mm per day for 5 weeks and the dogs were sacrificed after 15 weeks postoperatively to examine histologic differences and evaluate bone mineral density. Radiographic examination at an interval of two weeks was done to evaluate the type of callus formed and to analyze complications including instability of external skeletal fixation and axial deviation. Bone mineral density at the lengthened area and contralateral nonlengthened area were measured using quantitative computerized tomography. Histological examination of regenerated bone was performed using Masson's trichrome stain method. The radiographs demonstrated poor callus formation, higher incidence of axial deviation and screw loosening in the group I compared to the group II. The bone mineral density at the lengthened area in the group II was higher than that of the group I(P<0.05). Histological examination showed that the new bone trabeculae in the group II were greater than that of the group I. In conclusion, the combination of monolateral external fixator and intramedullary K-wire can prevent pin loosening, axial deviation and reduce healing period in dogs.

• Journal of Yeungnam Medical Science
• /
• 제30권2호
• /
• pp.116-119
• /
• 2013

A burnt-out prostate cancer tumor is a very rare clinical entity. The term 'burnt-out' refers to a primary tumor that has spontaneously and nearly completely regressed without treatment. Since metastasis of prostate cancer is usually encountered in the presence of advanced disease, distant metastasis with an undetectable primary tumor is very rare. We report herein a case of a burnt-out prostate cancer tumor that metastasized to the thoracic (T) spine and caused cord compression. A 66-year-old man visited the Emergency Department due to weakness of both legs for the past two days. His blood and urine tests were normal at the time. His spine magnetic resonance imaging (MRI) scans looked like bone metastasis that involved the T-7 vertebral body and a posterior element, and caused spinal cord compression. Other images, including from the brain MRI, neck/chest/abdomino-pelvic computed tomography (CT) scan and 18F-fluorodeoxyglucose (FDG)-positron emission tomography (PET) and endoscopy, revealed no lesions that suggested malignancy. After total corpectomy T-7 and screw fixation/fusion at T5 to T10, the pathology report revealed a metastatic carcinoma that was strongly positive for prostate-specific antigen (PSA). The serum PSA value was 1.5 ng/mL. The transrectal 12-core prostate biopsy and ultrasonography showed no definitive hypoechoic lesion, but one specimen had slight (only 1%) adenocarcinoma with a Gleason score of 6 (3+3). The final diagnosis was burned-out prostate cancer with an initial normal PSA value. Although metastatic disease with an unknown primary origin was confirmed, a more aggressive approach in seeking the primary origin could provide a more specific treatment strategy and greater clinical benefit to patients.

• Journal of Korean Neurosurgical Society
• /
• 제50권4호
• /
• pp.348-356
• /
• 2011

Objective : The safety and efficacy of various fusion substitutes in pyogenic osteomyelitis has not been investigated. We evaluated and compared the cadaveric allograft and titanium cages used to reconstruct, maintain alignment and achieve fusion in the management of pyogenic spinal infection. Methods : There were 33 patients with pyogenic osteomyelitis underwent fusion in this study. Fifteen of the 33 patients were operated on by fusion with allografts (cadaveric patella bones) and 18 of those were operated with titanium mesh cages filled with autologous cancellous iliac bone. After the affected disc and vertebral body resection with pus drainage, cadaveric allograft or titanium cages were inserted into the resected space. Posterior transpedicular screw fixation and rod compression in resected space, where cadaveric allograft or titanium cages were inserted, was performed to prevent the malposition in all patients except in 1 case. Recurrent infection was identified by serial erythrocyte sedimentation rate and cross reactive protein follow-up. Osseous union and recurred infection available at a minimum of 2 years following operation was identified. The amount of kyphosis correction and the subsidence were measured radiographically. Results : Spinal fusion was achieved in 29 of 33 patients. In the cadaveric allograft group, 93.3% of patient (14 of 15) showed the osseous union while 83.3% of patient (15 of 18) in the titanium cage group showed union. Subsidence was noted in 12 of the patients. Twelve patients (36.3%) showed unsettling amounts of subsidence postoperatively whereas 46.6% of patients in the cadaveric allograft group and 37.7% of patients in the titanium cage group showed similar subsidence, respectively. There were statistical difference in the fusion rate (p=0.397) and subsidence rate (p=0.276) between the two groups. There was significant statistical difference in the postoperative improvement of segmental kyphosis between the two groups (p=0.022), that is the improvement in sagittal alignment was greater in the titanium cage group than in the cadaveric allograft group. There was no case of recurred infection. Conclusion : The cadaveric allograft and titanium cages are effective and safe in restoring and maintaining sagittal plane alignment without increased incidence in infection recurrence in pyogenic osteomyelitis. The postoperative improvement of segmental kyphosis was better in the cage group.

• 구강회복응용과학지
• /
• 제24권2호
• /
• pp.203-211
• /
• 2008

교정치료에서 고정원의 조절은 치료목적을 달성하기 위한 중요한 고려사항이다. 최근 골에서 쉽게 지지를 얻을 수 있는 미니스크류가 개발되고 발전되어 많은 치료에서 사용되고 있는데, 이러한 미니스크류는 해부학적 구조물들의 손상을 최소화 하면서 안전하게 식립하는 것이 매우 중요하다. 이에 본 연구는 전산화단층촬영 사진을 이용하여 임상적으로 미니스크류를 흔하게 심는 부위이면서 초기 고정이 약한 상악 구치부 협측 부위의 안전성을 평가하고, 식립 각도에 따른 인접치아에 대한 손상가능성을 평가 하고자 하였다. 상악 구치부 협측에서 $1.2{\times}6.0mm$의 미니스크류를 식립하게 되면 일반적으로 CEJ에서 5~8mm 상방에 그리고 피질골 표면에서 3~5mm 내측에 미니스크류의 끝이 위치하게 된다. 이 경우 각 치근 사이의 면적을 측정하였다. 또한 식립각도를 30도, 45도, 60도로 나누어 식립 각도별 치근 사이의 길이를 측정하였다. 대구치와 대구치 사이, 대구치와 소구치 사이, 소구치와 소구치 사이의 3그룹으로 나누어 다음과 같은 결과를 얻었다. 1) 식립부위에 따른 비교에서 제1대구치와 제2대구치 사이에서 치간골의 면적이 유의하게 작았다. 2) 각도에 따른 비교에서 대구치 사이와 소구치와 대구치 사이에서는 더 기울여 식립 하는 것이 안전함을 보였으나, 소구치 사이에서는 식립 각도가 안전성에 크게 영향을 주지 못했다. 이상의 결과를 바탕으로 미니스크류를 식립 할 경우 대구치 사이보다는 대구치와 소구치 사이 또는 소구치 사이가 상대적으로 안전한 부위라는 것을 알 수 있었다. 그리고 대구치 사이와 대구치와 소구치 사이에 식립 할 경우에는 식립 각도가 증가 할수록 안전하다는 것을 알 수 있었다.

• Journal of Korean Neurosurgical Society
• /
• 제60권2호
• /
• pp.225-231
• /
• 2017

Objective : Solid bone fusion is an essential process in spinal stabilization surgery. Recently, as several minimally invasive spinal surgeries have developed, a need of artificial bone substitutes such as demineralized bone matrix (DBM), has arisen. We investigated the in vivo bone growth rate of DBM as a bone void filler compared to a local autologous bone grafts. Methods : From April 2014 to August 2015, 20 patients with a one or two-level spinal stenosis were included. A posterior lumbar interbody fusion using two cages and pedicle screw fixation was performed for every patient, and each cage was packed with autologous local bone and DBM. Clinical outcomes were assessed using the Numeric Rating Scale (NRS) of leg pain and back pain and the Korean Oswestry Disability Index (K-ODI). Clinical outcome parameters and range of motion (ROM) of the operated level were collected preoperatively and at 3 months, 6 months, and 1 year postoperatively. Computed tomography was performed 1 year after fusion surgery and bone growth of the autologous bone grafts and DBM were analyzed by ImageJ software. Results : Eighteen patients completed 1 year of follow-up, including 10 men and 8 women, and the mean age was 56.4 (32-71). The operated level ranged from L3/4 to L5/S1. Eleven patients had single level and 7 patients had two-level repairs. The mean back pain NRS improved from 4.61 to 2.78 (p=0.003) and the leg pain NRS improved from 6.89 to 2.39 (p<0.001). The mean K-ODI score also improved from 27.33 to 13.83 (p<0.001). The ROM decreased below 2.0 degrees at the 3-month assessment, and remained less than 2 degrees through the 1 year postoperative assessment. Every local autologous bone graft and DBM packed cage showed bone bridge formation. On the quantitative analysis of bone growth, the autologous bone grafts showed significantly higher bone growth compared to DBM on both coronal and sagittal images (p<0.001 and p=0.028, respectively). Osteoporotic patients showed less bone growth on sagittal images. Conclusion : Though DBM alone can induce favorable bone bridging in lumbar interbody fusion, it is still inferior to autologous bone grafts. Therefore, DBM is recommended as a bone graft extender rather than bone void filler, particularly in patients with osteoporosis.

• Journal of Korean Neurosurgical Society
• /
• 제46권4호
• /
• pp.322-327
• /
• 2009

Objective : Posterior lumbar interbody fusion (PLIF) is considered to have the best theoretical potential in promoting bony fusion of unstable vertebral segments by way of a load sharing effect of the anterior column. This study was undertaken to investigate the efficacy of PLIF with cages in chronic degenerative disc disease with Modic degeneration (changes of vertebral end plate). Methods : A total of 597 patients underwent a PLIF with threaded fusion cages (TFC) from 1993 to 2000. Three-hundred-fifty-one patients, who could be followed for more than 3 years, were enrolled in this study. Patients were grouped into 4 categories according to Modic classification (no degeneration : 259, type 1 : 26, type 2 : 55, type 3 : 11). Clinical and radiographic data were evaluated retrospectively. Results : The clinical success rate according to the Prolo's functional and economic outcome scale was 86% in patients without degeneration and 83% in patients with Modic degeneration. The clinical outcomes in each group were 88% in type 1, 84% in type 2, and 73% in type 3. The bony fusion rate was 97% in patients without degeneration and 83% in patients with Modic degeneration. The bony fusion rate in each group was 81% in type 1, 84% in type 2, and 55% in type 3. The clinical success and fusion rates were significantly lower in patients with type 3 degeneration. Conclusion : The PLIF with TFC has been found to be an effective procedure for lumbar spine fusion. But, the clinical outcome and bony fusion rates were significantly low in the patients with Modic type 3. The authors suggest that PLIF combined with pedicle screw fixation would be the better for them.

• Journal of Trauma and Injury
• /
• 제26권3호
• /
• pp.163-169
• /
• 2013

Purpose: This study was conducted to confirm the anatomic conformity of the new periarticular locking plates designed by Zimmer on Korean adult bones and to identify the structures at risk during the application of these implants. Methods: The study was performed on the humerus, radius, and tibia of 10 adult cadavers(6 males and 4 females) procured from the cadaveric lab of our hospital. Anteroposterior (AP) and lateral X-rays were taken to confirm that the cadavers were free of any unusual lesions or anatomic variations. We used the 3.5-mm proximal humerus plate, 2.7-mm distal radius plate, 3.5- and 5.0-mm proximal tibia plates, and 3.5-mm distal tibia plate developed by Zimmer, Inc. (Zimmer periarticular locking plate). The longest plate from each group was used to confirm anatomical conformity. Standard approaches were used for each area, and soft tissue was retracted in order to pass the plate beneath the muscle. The position of the plate was confirmed using standard AP and lateral view X-rays. After this procedure had been completed, the region was dissected along the length of the implant to determine the conformity of the implant to bone and the penetrations of screws into the articular surface or violations of any vital structures, such as nerves, blood vessels, or tendons. Results: Excellent anatomical conformity was observed with Zimmer periarticular locking plates for Korean adults. The tibial nerve and the posterior tibial artery were found to be structures at risk when applying a distal tibial plate. Conclusion: Additional posterolateral fixation is recommended when dealing with cases of tibial plateau fracture when the fracture line extends to the posterolateral cortex. We recommend taking proper views using 10~15 degrees of internal rotation to ensure correct screw length and, thus, avoid penetration of vital structures and tendons.