• The Journal of Korean Medicine
• /
• v.23 no.4
• /
• pp.27-31
• /
• 2002

Background and Purpose: There has been little study about the quality of acupuncture needle tips. In order to ensure safe acupuncture treatment, high quality of needle tips is essential. Therefore, we investigated the current condition of the tips of the acupuncture needles on the market. Methods: We selected needles made by 6 companies in Korea, one company each in Japan, the USA and China, and observed the tip of each needle using a scanning electron microscope. Results and Discussion: We found that needles had several defects such as scratch marks on the surface, metallic scuff, lumps and irregularities of the needle tips, stubbed or malformed tips, tips of point off-center, and peeled off coated tips. There were more faulty ones than good ones. Further, better-designed study with a bigger sample size is warranted.

• Journal of Acupuncture Research
• /
• v.20 no.5
• /
• pp.151-158
• /
• 2003

Objective: There have not been so many study about the quality of acupuncture needle tip. In order to ensure safe acupuncture treatment, the quality of needle tip is essential. Therefore we investigated the current condition of the tip of the acupuncture needles in Korea. Methods: We have selected the needles that made by 8 companies in Korea, and selected 50 pieces from 1000 pieces each company by randomized methods. and observed the tip of each needle using a scanning electron microscope at ${\times}800$ magnification. Results & Discussion: We found that needles had several defects such as scratch marks on the surface, metallic scuff, lumps and irregularities of the needle tips, stubbed or malformed tips, tips of point off-center, peeled off coated tips. There was much difference on the quality of needle among the manufacturer, and some needles seem to need to do- thorough quality control. It is necessary to intensify quality management and a concentrated control on manufacturing process of acupuncture needles.

• Journal of Acupuncture Research
• /
• v.22 no.6
• /
• pp.135-140
• /
• 2005

Objectives : There have been several studies about the quality of acupuncture needle tip recently. We have investigated the condition of the tip of the acupuncture needles in the last studies. In the former studies, we discovered the metallic scuff, lumps and irregularities of the acupuncture needle tips under the microscope. But, no information was available on those foreign materials' identity. Methods : We have selected 200 needles of 1000 pieces from several companies by randomized methods. And we observed the tip of the 6 needles selected finally at ${\times}1000\;or\;{\times}3000$ magnification and analyzed the components of the metallic scuff, lumps and irregularities of the needle tips with a SEM-EDX analyser. Results : We found that the identity of the metallic scuff, lumps and irregularities of the needle tips were metallic materials and silicon. For example, A point was composed of Fe(69.78%), Cr(17.71%), Ni(8.11%), Zn(2.04%), Si(1.23%), Mn(1.12%), and B point was composed of Si(66.40%), Fe(26.76%), Cr(6.84%). Conclusion : The results of this study confirm that there is a real possibility of the remaining of metallic materials and silicon in body of patient, after acupuncture treatment. Therefore, it is necessary to intensify our efforts to make needles of good quality and to concentrate on manufacturing process of acupuncture needles completely to be free from danger in acupuncture treatment.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.02a
• /
• pp.257-259
• /
• 2004

In this paper measurement method of uranium isotope ratio of uranium-bearing particles in swipe samples was introduced; Swipe sample screening program was proposed on the basis of studying various destructive assay and non-destructive assays. Scanning electron microscope(SEM) equipped with an energy dispersive X-ray fluorescence(XRF) system was applied to locate the deposited uranium-containing particles on the graphite support, particle's composition and size can be identified. Some isotope ratio results were compared with those of other bulk analytical methods; By measuring the same prepared sample, we got the U-particle isotopic ratio data similar to those from IAEA NWAL, indicating that our operation parameters and experimental conditions are viable and can be used for measurement of U-particle isotopic ratio from swipe samples.

• The Korean Journal of Mycology
• /
• v.24 no.4 s.79
• /
• pp.246-254
• /
• 1996

Since the mid of 1980's, cultivation area and production of Ganoderma lucidum have been increased annually in Korea. However, the presence of a fungal disease has become a major limiting factor in the cultivation of Ganoderma lucidum, causing a serious economic loss. The present study was carried out to isolate and identify the pathogenic fungus to Ganoderma lucidum. Several fungi isolated from the wood logs showing typical symptoms were tested whether they are pathogenic to Ganoderma lucidum or not by cross-pairing culture method, flask inoculation method, and wood log inoculation method. The pathogenic fungus produced ascomata. Mature ascomata was spherical, dark, thick-walled, $45{\sim}95\;{\mu}m$ diameter. Asci were thin-walled, evanescent when mature, disintegrate early. Ascospores were spherical, hyaline, glaborous, thick-walled, refractive, $3.6{\sim}4.3\;{\mu}m$ in size. Conidiophores soon became abundantly septate and broke up into arthrospores, which are cylindrical, $3{\sim}6\;{\mu}m$ long and $3{\sim}4\;{\mu}m$ wide. Based on the observations under dissecting microscope, light microscope and scanning electron microscope, teleomorph and anamorph of the pathogenic fungus were identified as Xylogone sphaerospora Von Arx & Nilsson and Sporendonema purpurascens (Bonordon) Mason & Hughes, respectively. X. sphaerospora is first reported as a pathogenic fungus of Ganoderma lucidum.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.116.2-116.2
• /
• 2013

최근 그래핀, hexagonal boron nitride (h-BN) 및 $MoS_2$ (molybdenum disulfide)와 같은 2차원 결정 물질들은 무어의 법칙 (Moore's Law)를 뛰어넘어 계속적인 소자의 소형화를 가능케 하고 또한 대면적, 저비용 소자 개발을 가능케 하는 우수한 특성을 가진 차세대 반도체 트랜지스터 소재로 각광받고 있다. $MoS_2$는 bulk 상태일 때는 1.2 eV의 indirect 밴드갭을 가지지만 단층형태일 때는 1.8 eV의 direct 밴드갭을 가지며 dielectric screening 기법 등을 통해 mobility를 향상시킬 수 있는 것으로 연구된 바 있다. 본 연구에서는 화학기상증착(chemical vapor deposition, CVD)법을 이용하여 $MoS_2$박막을 형성하기 위한 기초연구인 Mo전구체의 특성 평가 및 적합한 공정조건 개발 연구를 수행하였다. 사용한 전구체는 $Mo(CO)^6$ (Molybdenum hexacarbonyl)이고, 온도 및 압력, 반응기체($H_2S$, Hydrogen sulfide) 유량 등의 공정 조건 변화에 따른 거동을 Fourier transform infrared spectroscopy (FT-IR) 시스템을 사용하여 측정하였다. 또한 $Mo(CO)^6$의 분자구조를 상용 프로그램인 Gaussian으로 시뮬레이션 하여 실제 FT-IR 측정 결과값과 비교 분석하였다. 화학기상증착법을 이용한 $MoS_2$ 증착조건 최적화를 위하여 다양한 온도, 유량, 압력, 및 기판 종류에 대하여 증착 실험을 수행하였으며, 증착된 샘플은 scanning electron microscope (SEM), Raman spectroscopy를 이용하여 분석하였다.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.109-115
• /
• 2009

The purposes of this study are to treat sewage sludge that has increasingly become an issue and to recycle it as the adsorbent. The adsorbent was produced by carbonization and simultaneous steam activation, and its characteristics were studied. Parametric screening studies were carried out for the preparation of good adsorbent. Optimum operating conditions were confirmed as input carbonization-activated temperature of $840^{\circ}C$, feed steam flow rate of 70 g/min, carbonization-activated time of 30 min and feed dried sludge of 10.8 kg/day, respectively. At this time, the iodine adsorptivity was maximized as 328.1 mg/g. Pore development, structure, element compound and content were confirmed by using nanoPOROSITY, SEM (Scanning electron microscope), and EDS (Energy dispersive spectroscopy). Through this result, it was known that the adsorbent derived from sewage sludge could be used for the treatment of leachate in a landfill, VOCs (Volatile organic compounds), and so on.

• Journal of Ginseng Research
• /
• v.37 no.4
• /
• pp.483-490
• /
• 2013

Gamma-irradiation (0-7 kGy) of ginseng is permitted in Korea for the purpose of microbial decontamination; with strict labeling, traceability and monitoring requirements. An identification study was conducted to determine the photostimulated-luminescence (PSL) and thermoluminescence (TL) properties of gamma-irradiated fresh and white ginsengs cultivated in different areas. Dose- dependent PSL-based screening was possible for white ginseng samples; however, inappropriate results from non-irradiated fresh ginseng samples were obtained, showing intermediate (700 to 5,000) or positive ($T_2$ >5,000, irradiated) PSL counts due to the abundance of minerals on the surfaces of the samples. TL analysis of separated minerals from all non-irradiated samples gave TL glow curves of low intensity with a maximum peak after $300^{\circ}C$. However, well-defined irradiation-specific (high intensity with a maximum peak at about $200^{\circ}C$) glow curves were observed for all the irradiated samples, regardless of their type and origins. TL ratios (first glow curve /second glow curve) were also determined to confirm the irradiated (>0.1) and non-irradiated (<0.1) results. SEM-EDX (scanning electron microscope-energy dispersive X-ray) and XRD (X-ray diffraction) spectroscopic analyses showed that feldspar and quartz minerals were the main source for the typical radiation-specific luminescence properties.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2010

It is of importance that all countries in worldwide, including EU and China, have adopted the Restrictions on the use of certain Hazardous Substances (RoHS) for all electronics. IEC62321 document, which was published by the International Electronics Committee (IEC) can have conflicts with the standards in the market. On the contrary Publicly Accessible Specification (PAS) for sampling published by IEC TC111 can be adopted for complementary application. In this work, we tried to find a route to disassemble and disjoint cellular phone sample, based on PAS and compare the screening methods available in the market. For this work, the cellular phone produced in 2001, before the regulation was born, was chosen for better detection. Although X-ray Fluorescence (XRF) showed excellent performance for screening, fast and easy handling, it can give information on the surface, not the bulk, and have some limitations due to significant matrix interference and lack of variety of standards for quantification. It means that screening with XRF sometimes requires supplementary tool. There are several techniques available in the market of analytical instruments. Laser ablation (LA) ICP-MS, energy dispersive (ED) XRF and scanning electron microscope (SEM)-energy dispersive X-ray (EDX) were demonstrated for screening a cellular phone. For quantitative determination, graphite furnace atomic absorption spectrometry (GF-AAS) was employed. Experimental results for Pb in a battery showed large difference in analytical results in between XRF and GF-AAS, i.e., 0.92% and 5.67%, respectively. In addition, the standard deviation of XRF was extremely large in the range of 23-168%, compared with that in the range of 1.9-92.3% for LA-ICP-MS. In conclusion, GF-AAS was required for quantitative analysis although EDX was used for screening. In this work, it was proved that LA-ICP-MS can be used as a screening method for fast analysis to determine hazardous elements in electrical products.

• Applied Biological Chemistry
• /
• v.46 no.3
• /
• pp.262-267
• /
• 2003

Chestnut (Casranea crenata S. et Z.) leaves and flowers were extracted with 80% methanol and then fractionated with ethylacetate, methanol and water. Their antimicrobial activities in each fraction were investigated. Methanol fraction of the chestnut leaves and flower showed strong antimicrbial activities against both of Gram positive and Gram negative bacteria. The ethylacetate and water fraction, however, showed only weak antimicrobial activities when the antimicrobial activities were occurred. Minimal inhibitory concentration (MIC) of the methanol extracts of the chestnut leaves and flowers against 5 strains of Gram positive and Gram negative bacteria were at $60\;{\mu}g/disc$. The extracts of the chestnut leaves and flowers inhibited the growth of Bacillus subtilis at 0.5% (w/w) concentration. In order to investigate the effect of extraction methods on the B. subtilis, scanning electron microscope was used. The B. subtilis was damaged when the methanol extracts of the chestnut leves and flowers were at 500 ppm.