• Journal of Electrochemical Science and Technology
• /
• 제4권4호
• /
• pp.146-152
• /
• 2013

We demonstrate that carbon electrodes screen-printed directly on cellulose paper can be employed to perform bipolar electrochemistry. In addition, an array of 18 screen-printed bipolar electrodes (BPEs) can be simultaneously controlled using a single pair of driving electrodes. The electrochemical state of the BPEs is read-out using electrogenerated chemiluminescence. These results are important because they demonstrate the feasibility of coupling bipolar electrochemistry to microfluidic paperbased analytical devices (${\mu}PADs$) to perform highly multiplexed, low-cost measurements.

• 센서학회지
• /
• 제19권6호
• /
• pp.421-427
• /
• 2010

Alizarin Red S modified screen printed carbon electrodes were developed for the electrochemical detection of aluminum ion. The electrodes developed use screen-printed carbon electrodes(SPCEs) coupled with chemical modification with an organic chelator, Alizarin Red S(ARS), for aluminum ion detection in aqueous solution. For sensor fabrication ARS was directly immobilized on the surface of SPCEs using PVA-SbQ(The poly(vinyl alcohol) bearing stryrylpyridinium groups). Aluminum concentrations were indirectly estimated by amperometric determination of the non-complexed ARS immobilized on the electrodes, after its complexation with aluminum. The sensitivity of the sensor developed was $3.8\;nA{\mu}M^{-1}cm^{-2}$ and the detection limit for aluminum was $25\;{\mu}M$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.889-892
• /
• 2009

We have developed a practical printing technology for the gate electrode of organic thin film transistors(OTFTs) by combining screen-printing with wet-etching process using nano-silver ink as a conducting material. The screen-printed and wet-etched Ag electrode exhibited a minimum line width of ~5 um, the thickness of ~65 nm, and a resistivity of ${\sim}10^{-6}{\Omega}{\cdot}cm$, producing good geometrical and electrical characteristics for gate electrode. The OTFTs with the screen-printed and wet-etched Ag electrode produced the saturation mobility of $0.13cm^2$/Vs and current on/off ratio of $1.79{\times}10^6$, being comparable to those of OTFT with the thermally evaporated Al gate electrode.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.83-89
• /
• 2015

본 논문에서는 졸-침투와 직접-패턴 공정을 이용하여 향상된 압전 후막의 전기적 특성과 우수한 패터닝 특성을 동시에 만족할 수 있는 제작 방법을 제시한다. 저온(< $850^{\circ}C$) 공정 후 후막의 고밀도 및 직접-패턴의 목적을 달성하기 위해서, 감광성 티탄산 지르콘산 연 ($Pb(Zr,Ti)O_3$, PZT) 졸을 스크린인쇄된 PZT 후막 내부로 침투시켰다. 직접-패턴된 PZT막은 포토크롬마스크와 UV 조사에 의해서 일정한 간격으로 인쇄된 후막 위에 성공적으로 형성되었다. 스크린인쇄된 후막은 분말형태의 기공성 구조를 갖고 있어 조사된 UV빛이 산란되기 때문에, 감광성 졸-침투 공정을 할 때 PZT 후막의 특성을 증가시키기 위한 공정의 최적화가 필요하다. 침투된 감광성 PZT 졸의 농도, 조사된 UV 시간 및 용매 현상 시간을 최적화한 결과, 0.35 M의 PZT 농도, 4 분의 UV 조사시간과 15 초의 용매 현상시간으로 졸-침투된 PZT 후막은 $800^{\circ}C$ 소결 온도에서 입자들의 성장에 의해 치밀화 정도가 증가되었다. 또한 PZT후막의 강유전 특성(잔류분극 및 항복 전압)도 향상되었다. 특히 잔류분극값은 스크린인쇄된 후막보다 약 4배정도 증가되었다. 이렇게 제작된 후막은 어레이타입의 압전형 마이크로미터크기의 센서 및 액츄에이터 등에 응용 가능성을 제시할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.921-925
• /
• 2000

Characteristics of Pb(Mg, Nb)O$_3$-Pb(Zr, Ti)O$_3$system thick films fabricated by a screen printing method were investigated. The buffer layer were coated with various thickness of Ag-Pd by screen printing to investigate the effect as a diffusion barrier and deposited Pt as a electrode by sputtering on Ag-Pb layer. The printed thick films were burned out at 650$\^{C}$ and sintered at 950$\^{C}$ in O$_2$condition for each 20, 60min after printing with 350mesh screen. The thickness of piezoelectric thick film was 15∼20㎛ and Ag-Pb layer acted as a diffusion barrier above 3㎛ thickness. The PMN-PZT thick films were screen printed on Pt/Ag-Pb(6m) and sintered by 2nd step (650$\^{C}$/20min and 950$\^{C}$/1h) using paste mixed PMN-PZT and binder in the ratio of 70:30, and the remnant polarization of thick film was 9.1$\mu$C/㎠ in this conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.98-101
• /
• 2005

변환 효율이 $16\%$에 근접하는 다결정 실리콘 태양전지를 위한 열처리 공정에 대한 연구를 수행하였다. 고속 열처리 공정이 가능한 RTP 를 사용하여 다결정 실리콘 태양전지의 효율 향상에 요구되는 PECVD $SiN_x$ 반사방지막을 이용한 결정 결함의 수소화 효과를 극대화하는 동시에 양산 가능한 screen-printed contacts 의 특성 (FF >0.76) 올 최적화함으로써 다결정 실리콘 태양전지의 변환 효율을 $15.9\%$까지 향상시킬 수 있었다.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.314-324
• /
• 2010

The purpose of this study is to obtain the dyed-fabrics of the elaborate patterns using the natural dye powders extracted from Galla Rhois, Sophorae Flos Immaturus, Clove, Sappan Wood, Madder, Log Wood and Japanese Green Alder. Specific informations on the separation and powder-making of each colorant were disclosed. Appropriate printing paste preparation and printing conditions including the viscosity and mordant concentration in the printing paste were investigated. The dyeability and colorfastness of the screen-printed silk fabrics with the colorant powders were discussed in terms of practical applicability. The deodorization and antimicrobial activities of the silk fabrics screen-printed with natural dyes were also assessed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.655-657
• /
• 2002

The carbon nanotube emitters for field emission displays were fabricated by screen printing techniques. The pastes for screen printing are composed of organic binders, carbon nanotubes, and some additive materials. Then the pastes were printed on Cr-coated/Ag-printed soda-lime glass substrates. From the I-V characteristics, the turn-on field of SWNT was lower than that of MWNT. The decrease in the mesh size of screen masks resulted in decreasing the turn-on field and increasing the electron emission current. When the carbon nanotubes were mixed with glass frit, glass frit appeared to contribute to the vertically aligning of carbon nanotubes on glass.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 춘계 학술발표강연 및 논문개요집
• /
• pp.99-99
• /
• 2002

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.21.2-21.2
• /
• 2007