• 한국인쇄학회지
• /
• 제31권1호
• /
• pp.51-64
• /
• 2013

When it comes to current growth trend for the printing process in Asia printing market, offset printing, gravure printing and screen printing are reduced respectively -4%, -19%, -55%. In judging from the fact, the change in the printing production system from mass production on small amount to small production on mass amount is the biggest issue. For this reason, digital printing shows the significant growth. According to the increase of the growth 78% for electro photography way and 67% for ink-jet, it's not enough to catch up with digital printing which is increasing as time goes by to equip with hardware like as digital press. There's been necessary to install the BOD(Book on Demand) system which is the advanced and regular publication edit solution based on web-to-print model in the prepress, and it has made the BOD system be considered in relation to maximization of efficiency and production. Therefore, this research tries to step forward from the POD concept, which is refired to "Print along with the ordered quantities, the ordered appropriate time and the demanded place", so that it could expand the range of the printing/publishing environment using the BOD system, the order-made publication based on automatically operating template. And it tried to make the relation to digital web press on ink-jet method which is adequate to "mass production on small amount" with such advanced concept. This research also aims to use actively BOD solution model to promote the productivity of labor, and then to produce the printings across all related industries, which means to manufacture maximally the products on the shortest time at minimum place through PC equipments.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.30-35
• /
• 1995

전자기기의 소형화는 앞으로도 계속 진행될 것이므로, 이에 필요한 Fine Pitch 또는 고밀도 실장기술의 개발이 지속적으로 요구될 것으로 생각된다. 앞에서 언급한 3가지 Fine Pitch 표면실장을 위한 Solder 합금의 공급 방법중에서 종래의 Screen Print 방법과 Projected Solder Pre-coat 방법은 0.3mm Pitch가 한계인 것으로 생각되며, Super Solder Pro-coat 방법은 좀 더 Fine Pitch 까지도 사용 가능한 기술 로 생각된다. 이외에도 0.1mm 보다 미세한 Pitch의 표면실장을 위하여, Solder에 의한 접합이 아닌, 이방성 도전 접착제와 같은 도전성 매개체를 통하여 접촉에 의한 표면 실장의 개념도 도입하고 있다.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.20-25
• /
• 2010

The effect of micro surface structure on printing for printed electronics has been studied experimentally. The photolithography MEMS fabricationwass used to make a SU-8 molder which has micro structures on the surface, and the PDMS micro structure was fabricated by the PDMS molding method. In the aspect of printed electronics, we used silver paste conductive ink. We measured the surface energy variation on pillar microstructure. The microstructure was used to real printing experiment by a screen printing. We printed 1cm micro lines which have $30{\sim}250{\mu}m$ width, and checked the conductivity to sort out opened line pattern. Printability was defined by success probability of printed patterns and we found that the present microstructures improve the printability significantly.

• 한국전기전자재료학회논문지
• /
• 제33권5호
• /
• pp.355-359
• /
• 2020

In this study, image analysis and surface roughness measurements using an optical microscope are presented as a method to quantitatively evaluate the results of screen printing. Using this method, the squeegee speed, which is the printing process condition, and the printability of the electrode according to the screen mesh were evaluated. Increasing the squeegee speed in the printing process acts as a process element that increases the line width precision of the printed electrode and lowers the surface roughness of the printed surface. Furthermore, the edge roughness, which indicates the clarity of printing, was not significantly affected by the speed of the squeegee during printing. The print thickness increases in proportion to the squeegee speed, but is largely dependent on the screen thickness.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.687-687
• /
• 2013

In rearpoint contact solar cell and the PERC (passivated emitter rear contact) type cell, surfaces were passivated by SiO2 or Al2O3 to increase solar cell efficiency. Therefore, we have investigated the effect of surface passivation for crystalline silicon solarcell using mass-production atomic layer deposited (ALD) Al2O3. The patttern which consists of cylinders with 100um diameter and 5um height was formed by PR patterning on Si (100) substrate and then Al2O3 of about 10nm and 20nm thickness was deposited by ALD. The pattern in 10 nm Al2O3 film was removed by dipping in aceton solution for about 10 min but the pattern in 20 nm Al2O3 film was not. The influences of process temperature and heat treatment were investigated using microwave photoconductance decay (PCD) and Quasi-Steady-State photoconductance (QSSPC). The solar cell process used in this work combines the advantage of using the applicability of a selective deposition associated with a ALD passivation and the use of low-cost screen print for the contacts formation.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.663-667
• /
• 2003

The effects of paste materials on field emission properties in a carbon nanotube(CNT) cathode were investigated for high-efficient field emission displays. The major components in CNT paste for screen printing were a metallic Ag-paste, a dielectric glass-frit and CNT ink. The emission current from the cathode by an electron tunneling effect increased with an increase in the dielectric material fraction in the CNT paste, which is related to an increase of field enhancement factor in Fowler-Nordheim equation. The surface treatment used, after soft baking of the screen-printed CNT films, greatly affected the decrease in the turn-on field in CNT cathode and the uniformity of emission sites over the entire CNT film area.

• 한국정보통신학회논문지
• /
• 제15권9호
• /
• pp.1918-1924
• /
• 2011

본 논문에서는 접근성이 뛰어난 웹 서비스라는 환경을 이용하여, 템플릿을 생성 제공하고, 사용자가 쉽게 편집할 수 있도록 제공하며, 편집한 파일과 동질의 인쇄물을 실시간으로 출력할 수 있는 웹 표준을 따르는 COM 포트(Communication Port)를 이용한 POD(Print on Demand) 시스템의 프레임워크(framework)를 제안한다. 본 논문에서 제안한 프레임워크의 특징은 기본적인 인터넷 활용 능력을 갖춘 사용자들로 하여금, 기존의 전문 편집 프로그램과 비교하여 상대적으로 쉽게 배우고 활용 할 수 있으며, 사용자가 직접 제작한 파일을 화면 그대로의 품질로 실시간으로 인쇄할 수 있는 프로그램을 만들고, 접근성을 높이도록 하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.20.2-20.2
• /
• 2010

Recently inkjet printing technology has been developed in the areas of low cost fabrication in environmentally friendly manufacturing processes. Although inkjet printing requires the interdisciplinary researches including development of materials, manufacturing processes and printing equipment and peripherals, manufacturing a printhead is still core of inkjet technology. In this study, a piezoelectric driven DOD (drop on demand) inkjet printhead has been fabricated on three layers of the silicon wafer in MEMS Technology because of its chemical resistance to industrial inks, strong mechanical properties and dimensional accuracy to meet the drop volume uniformity in printed electronics and display industries. The flow passage, filter and nozzles are precisely etched on the layers of the silicon wafers and assembled through silicon fusion bonding without additional adhesives. The piezoelectric is screen-printed on the top the pressure chamber and the nozzle plate surface is treated with non-wetting coating for jetting fluids. Printheads with nozzle number of 16 to 256 have been developed to get the drop volume range from 5 pL to 80 pL in various industrial applications. Currently our printheads are successfully utilized to fabricating color-filters and PI alignment layers in LCD Flat Panel Display and legend marking for PCB in Samsung Electronics.

• 한국비블리아학회지
• /
• 제22권3호
• /
• pp.173-188
• /
• 2011

본 연구는 독서장애인을 위한 DAISY 서비스 인터페이스 구성에 대한 경험적인 권장사항을 밝히기 위한 연구로서 실제 서비스 사례를 기반으로 연구가 진행되었다. 서비스 사례는 LG 상남도서관에서 제공 중인 책읽어주는 도서관 서비스(http://voice.lg.or.kr)를 대상으로 하였다. 연구방법은 웹 서비스를 통해 제공되는 DAISY 플레이어(S/W)의 서비스 인터페이스를 전문가 집단이 평가하고, 평가 결과를 반영하여 신규 DAISY 플레이어를 개발하는 방식으로 진행되었다. 전문가 집단의 현재 인터페이스 평가 결과 신규 인터페이스에 반영해야 할 주요 개선사항이 도출되었으며, 주요 개선사항으로는 스크린리더의 화면 낭독 흐름 고려, 소프트웨어 동작 지연시 오류 인식 방지, 웹 기반 소프트웨어의 개발, 다양한 부가기능의 제공, 단축키 충돌 방지 등이 제시되었다.

• 한국정보통신학회논문지
• /
• 제17권2호
• /
• pp.263-272
• /
• 2013

인쇄전자는 다양한 기판에 기능적 소자를 프린팅한다. 인쇄방법은 스크린 인쇄, 플렉소그라피, 오프셋 리소그라피와 잉크젯 방식을 통해 적정한 패턴을 만든다. 인쇄기법을 응용하여 활용하기 때문에 전통적인 극소전자공학에 비하여 생산과정이 간단하고 비용 또한 저렴하다. 잉크젯 및 R2R(Roll to Roll)기술이 발전을 거듭해 왔기 때문에 디스플레이에서 태양전지의 제조까지 그 기술이 활용된다. IDTech(2010)에 의하면, 전자인쇄시장은 2010년에 10.99(억달러)에서 2020년 55.10(억달러)로 커질 것이며, 2030년에는 반도체산업의 규모보다 큰 3,000억 달러가 될 것으로 전망하고 있다. 센서, 배터리, 광전지, 메모리, 스마트카드 시장이 확대되는 등 조명에서 디스플레이까지 인쇄전자산업시장은 성장할 것이다.