• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.52-61
• /
• 2020

The natural change of winter night temperature from 00:00 to 04:30 O'clock with the different height of thermal screen in a venlo type glasshouse (W59×L68×H5.9 m) was studied using computational fluid dynamics (CFD). At the early stage of CFD analysis, the room temperature decrease of glasshouse with the 5.9 m height of thermal screen were faster than it with the 4.1m height of thermal screen, but at 2 hr after analysis it was slower than in it with the 4,1m, the temperature difference was 0.6℃ after 4 hr. If we consider that turn on the heater when the temperature were decrease below 13℃ at 1hr after CFD analysis, it is good for energy saving in the glasshouse with the 4.1 m height of thermal screen rather than in it with the 5.9 m height, because of the temperature decrease were slow during 2 hrs after analysis. The airflow at the height of 2 m which were grown tomato were fast and wide in the glasshouse with the 5.9 m height thermal screen rather than in it with the 4.1 m, the speed difference was 0.034m·s^-1 at 1hr after CFD analysis. The effect of temperature decrease in summer season were compared with the different height of shading screen from 12:00 to 14:30 O'clock. The height of shading screen were 5.7, 3.9 m, the gap of it were 30%. The air-inflow quantity by the fan with duct at lower part of venlo glasshouse was 0.67 ㎥·s^-1 until 1hr and to increase 3 times of it from 1hr after analysis. The roof window were open 100%. Until 1hr of CFD analysis, the temperature in the 30% open of shading screen was 0.9℃ higher than in the none shading screen. From 13:00 O'clock when the air-inlet quantity to increase 3 times, the temperature in case 30% gap of shading screen were decreased compare with the none shading screen, the temperature difference was 0.5℃ at 14:30 O'clock. The temperature on the floor surface in case 30% gap of shading screen were lower with it's height increase, the temperature difference was 8℃ compare with none shading screen. The relative humidity difference were insignificant by the height and gap of shading screen.

• The Journal of Korean Physical Therapy
• /
• v.13 no.3
• /
• pp.829-837
• /
• 2001

Using Video Display Terminals(VDT) in the working environment often causes health complaints in the neck and shoulder region. This study was conducted on ten subjects, in order to investigate the change of electromyographic activities in the neck region(sternocleidomastoid muscle, upper trapezius muscle and erector muscle of cervical spine)with regards to the screen height and document holder position. A total of six different conditions of screen height and document holder position were measured during subjects performed a text-entry task for a duration of 10min. The raw EMG signal was transmuted into the root mean square(RMS). Two-way ANOVA for repeated measures was used to analyse the effects of the two factors. As a result, changing the screen height and document holder position has no effect on electromyographic activities in the neck region.

• IE interfaces
• /
• v.20 no.4
• /
• pp.539-546
• /
• 2007

This study has been conducted on touch screen interface design for mobile devices. It was intended to measure user’s satisfaction on one-handed thumb input mobile devices. Recent studies proposed the optimal touch button size, but it is inappropriate for mobile devices. Therefore, this study was focused on four touch key factors-width, height, the horizontal and vertical distance between touch keys-as independent variables. The ANOVA results showed that the user satisfaction of four touch key factors was significantly affected by the thumb input. It also apparent that the interactions between four factors were significant. As a result, the horizontal and vertical distance as well as the width and height affected the satisfaction of users. In addition, this study suggested satisfaction models which represent the top 30%, 50%, 70% of user satisfaction measurement. The results of this study could be used to design touch keys that are able to enhance the usability on touch screen based mobile devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1486-1489
• /
• 2009

Micro wall is fabricated using iterative screen printing that it is able to fabricate the pattern as low cost, simple process, formation of pattern at large area on the various substrates. In the process of micro wall fabrication using screen printing, the printing result with pressure change in process and improvement of surface roughness using hydrophillic plasma treatment are included. Height of micro wall increase linearly and precision of iteration is very high. Error rate of printed pattern width is very high, but change rate of width is under 10 %. Fabricated micro pattern have minimum width $48.75{\mu}m$ and maximum height $75.45{\mu}m$ with aspect ratio 1.55.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.2
• /
• pp.185-193
• /
• 2011

The purpose of this study was to determine the effects of nutrient intake, screen time (television viewing and computer and/or video games) and physical activity on obesity in preschool children. Recruitment began in January 2008 by distributing letters to mothers who had children aged 6 years enrolled in daycare. Dietary intakes were obtained from the children's mothers, using the 24-hour recall method. The average height and weight of the children were 114.2 cm and 20.3 kg, respectively. Mean age, body weight, height and Kaup index were not significantly different between groups consisting of boys or girls. Assessment by the Kaup index showed that 14.0% of children were underweight, 69.0% were normal weight, 13.0% were overweight, and 4% were obese. The daily intakes of calcium, potassium, fiber, and folic acid in the group of boys were 77.7%, 58.5%, 80.4% and 88.9% respectively. as compared with the DRIs. The daily intakes of calcium, potassium, fiber, and folic acid in the group of girls were 77.7%, 58.5%, 80.4% and 88.9%, respectively. as compared with the DRIs. Intakes of protein, phosphorus, iron, zinc, vitamin A, thiamin, riboflavin, niacin, vitamin C, and vitamin E were higher than the DRIs. There were no difference among 3 groups (underweight, normal, overweight) in energy or nutrient intake. Preschool children with screen time (TV viewing and computer and/or video games use time) of >2 hours per day had significantly higher Kaup index values, and intakes of energy, carbohydrate, folic acid and zinc. In conclusion, preschool children with reported screen time (TV viewing and computer and/or video games use time) of >2 hours per day were fatter. Therefore, we need further investigate the relation between diet and screen time in preschool children to improve future nutrition education programs. Further studies are required to explore the effects of food intake and screen time (TV viewing and computer and/or video games use time) over a longer period of time.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.106-113
• /
• 2012

A study on techniques to evaluate auditorium assignment visible efficiency using three-dimensional simulation. The most important thing to be considered is to ensure the visibility to the podium upon assigning auditorium of venues, classrooms or seminar rooms. However, since there are so many variables to be considered such as the form of the stage, the area and height of the stage, size of screen, and the distance and angle of the auditorium from the podium, the methods to assign auditorium are staying at the level of basic for a long time. Thus, in this study, we proposed simulation methodology to quantitatively evaluate the three-dimensional visible efficiency based on Visual Graph Analysis (VGA) theory. After analytical methodology manufactures application, it sets examples of visibility depending on location of screen, visibility depending on degree of height difference and visibility about three-dimensional Mass Zoning like a stage and verifies the efficacy. In addition, based on results, visibility expectation curve is drawn and the method to calculate the stepped height depending on necessary visibility is proposed.

• Particle and aerosol research
• /
• v.17 no.2
• /
• pp.37-42
• /
• 2021

Although the installation of droplet protection screen (DPS) is known to prevent droplet transmission, there is still a lack of knowledge in effectiveness of DPS installation to block the airborne transmission. In this study, the prevention ability of DPS against airborne transmission was evaluated according to the DPS height. When the DPS was not installed, the maximum concentration of PM1.0 at the location opposite to infected person was 35% of that at the infected person location. When the DPS was installed, the DPS effectively prevented the airborne transmission, consequently approximately 7% of generated particles were measured at the opposite location from particle generation position (infected person location). The prevention ability of DPS increased with DPS height, the maximum prevention efficiency of 95.1% was obtained when the DPS height was 900mm. Moreover, the speed of airborne transmission was delayed by installation of DPS, and the delay time increased with DPS height.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.4
• /
• pp.209-216
• /
• 2014

The screen printed technique is one of the electrode forming technologies for crystalline silicon solar cell. It has the advantage that can raise the production efficiency due to simple process. The electrode technology is the core process because the electrode feature is given a substantial factor (for solar cell efficiency). In this paper, we tried to change conditions such as squeegee angle $55{\sim}75^{\circ}$, snap off 0.5~1.75 mm, printing pressure 0.6~0.3 MPa and 1.6~2.0 mm finger spacing. As a result, the screen printing process showed an improved performance with an increased height higher finger height. Optimization of fabrication process has achieved 17.48% efficiency at screen mesh of 1.6 mm finger spacing.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.196-203
• /
• 2011

Experiments to determine heat transfer coefficients and friction factors are conducted on a stationary transverse parallel wire-screen rib roughened rectangular channel. The test section consists of 198 mm (W) x 40 mm (H) x 712 mm (L). The channel has the aspect ratio of 4.95 and hydraulic diameter of $D_h$=6.66 cm. Four wire screen ribs and a solid rib are used. 0.1 mm-thick-stainless steel foil heaters and thermocouples (T type) are used to measure the heat transfer coefficients. Reynolds numbers studied range from 20,000 to 60,000. The wire-screen rib height (e) to hydraulic diameter ($D_h$) ratio ($e/D_h$) is 0.075; spacing (p) to height ratio (p/e) is 10. Results indicate that the solid rib produces the greatest Nusselt number and friction factor.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.177-185
• /
• 2018

There is a need to study dust separator screens with good drainage efficiency while effectively filtering suspended solids and other contaminants entering the intake pumping station, the drainage pumping station and the mediation pumping station, the cooling water inlet of the power plant, and the like. In this paper, Numerical studies were conducted for the optimal design of the dust separator screen using the Coanda effect. The shape of the dust separator screen is important, such as the right curvature radius $R_1$ at the top of the dust separator screen and the left curvature radius $R_2$ at the top, h is the height difference and shape between the screen and the accelerating plate, and ${\theta}$ is the inclination angle of the screen. A total of 4 shape factors were set and the effects of Coanda and drainage performance of each element were compared and analyzed, the optimum length and size of each shape element were derived by classifying the shape elements into direct and indirect influences. Finally, it was possible to effectively filter foreign matter by narrowing the screen spacing, and the drainage performance was analyzed and optimized through numerical studies of dust separator screen.