• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2385-2390
• /
• 2015

In the beginning run, urban railway had been required as transportation. But now days urban railway have stayed in the platform for long time, the platform is faced the problem that is improvement of environment as one of the living space. Thus, sliding automatic door on the basis of screen door have used in huge distribution market, hospital, restaurant and public office because it is comfortable that customer's convenience and entrance are controled. So screen door not only requires customer's convenience and safe, clean area and energy conservation but demands optimal design technology development of screen door system that is confirmed by element parts of design and confidence. In this paper, For secure confidence of screen door, after as modeling roller and frame's system, confirming the result for qualification of driving stiffness. And then it suggests that it is possible to increase performance and declines fraction defective of element's part.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.28-33
• /
• 2023

In this study, computational fluid dynamics was used to analyze the flow bias generated as air supplied by a fan passes through ducts, piping, and a coal separation screen. The flow bias of the air flow is mostly caused by the spatial characteristics of the fan volute and duct, and the internal baffle and the coal separation screen at the outlet cause strong pressure losses that dampen the flow bias. ANSYS CFX was used for computational fluid dynamics, and since the baffle and the coal separation screen are shaped like perforated plates with many small holes uniformly distributed, actual modeling for analysis was not possible. Therefore, the Porous Loss Model was applied. The evaluation of the flow bias was analyzed based on the velocity distribution of the Porous Loss Model at the outlet surface of the coal separation screen obtained from the computational fluid dynamics results.

• Current Optics and Photonics
• /
• v.8 no.3
• /
• pp.307-312
• /
• 2024

Measuring the three-dimensional (3D) spatial light intensity distribution of an autostereoscopic multiview 3D display at the user position is time-consuming, as luminance has to be measured at different positions around the user position. This study investigates a method to quickly estimate the 3D distribution at the user position. For this purpose, a measurement setup using a white semitransparent diffusing screen or a two-dimensional (2D) spatial sensor was devised to measure the 2D light intensity distribution at the user position. Furthermore, the 3D spatial light intensity distribution at the user position was estimated from these 2D distributions at different viewing distances. From the estimated 3D distribution, the characteristics of autostereoscopic 3D display performance can be derived and the candidate positions for further accurate measurement can be quickly determined.

• Radiation Oncology Journal
• /
• v.22 no.1
• /
• pp.64-68
• /
• 2004

Purpose : To study the feasibility of verifying real-time 2-D dose distribution measurement system with the scintillation screen for the quality assurance. Materials and Methods : The water phantom consisted of a scintillation screen (LANEX fast screen, Kodak, USA) that was axially located in the middle of an acrylic cylinder with a diameter of 25 cm. The charge-coupled device (CCD) camera was attached to the phantom In order to capture the visible light from the scintillation screen. To observe the dose distribution In real time, the intensity of the light from the scintillator was converted to a dosage. The isodose contours of the calculations from RTP and those of the measurements using the scintillation screen were compared for the arc therapy and the Intensity modulated radiation therapy (IMRT). Results : The kernel, expressed as a multiplication of two error functions, was obtained in order to correct the sensitivity of the CCD of the camera and the scintillation screen. When comparing the calculated isodose and measured isodose, a discrepancy of less than 8 mm in the high dose region was observed. Conclusion : Using the 2-D dosimetry system, the relationship between the light and the dosage could be found, and real-time verification of the dose distribution was feasible.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.446-448
• /
• 2001

We have developed the testing software for KEPCO operators to maintain the small-scale distribution automation system effectively. The testing software is used to monitor the present status, to measure the analog value(voltage, amperage) and to control the switch and FRTU(Feeder Remote Terminal Unit) in order to find out a disabled part of the system. And at the stage of inspection of the switch and FRTU, it can screen the inferior one.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.85-91
• /
• 2010

In the food process, twist screen is widely used to divide particles on the basis of size. As screen equipped in the twist screen perfoms an important part in the particle size distribution mechanism, the contact area of screen and particles, retention time of particles on the screen, mesh and string thickness of screen and the flow pattern of particles on the screen are major points of the separation efficiency. To improve the separation efficiency, increase the retention time and control the flow pattern of particles, screen frame dam and spiral blockage are installed on the sieve of twist screen ${\emptyset}$ 1200 and ${\emptyset}$ 1500. Twist screen ${\emptyset}$ 1500 with frame dam treated similar separation capacity, 37% higher separation ratio and less non-separated particles of product output 1 than general twist screen. Twist screens with frame dam and spiral blockage showed less treatment capacity, three times higher division ratio and entire separation than general twist screen.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.86-92
• /
• 2007

In this study, we tried to quantitatively study the distribution of estrogenic activity in sediment from Gwangyang Bay by E-screen assay. Besides, we compared the estrogenic activity and the concentration of chemical pollutants. The highest estrogenic activity was recorded at the stations(GY6 and GY8) close to industrial complex and the river mouth of Seomjin. These results obtained from the E-screen assay similar to those of simultaneous analytical detection of 310 chemicals. In particular, GY6 and GY8 sites are confirmed as the full agonist sites because of their RPE values were over 90% having strong estrogenic effect. Also, their EEQ(Estradiol Equivalency Quantity) values are 35.6 ng/g and 14.6 ng/g, low than that of other sites, and these results suggests that have relatively high estrogenic efficiency in Gwangyang Bay. From these results, we can estimate that the stations close to industrial complex and the river mouth of Seomjin are major sources of endocrine disrupter in Gwangyang Bay. On the other hand, when we tried to compare the endocrine disrupter activity and $COD_{Mn}$ value, that is not correlated.

• East Asian mathematical journal
• /
• v.30 no.5
• /
• pp.599-607
• /
• 2014

We study lightlike hypersurfaces M of an indefinite Kaehler manifold $\bar{M}$ of quasi-constant curvature subject to the condition that the curvature vector field of $\bar{M}$ belongs to the screen distribution S(TM). We provide several new results on such lightlike hypersurfaces M.

• Kyungpook Mathematical Journal
• /
• v.51 no.2
• /
• pp.125-138
• /
• 2011

We give some characterizations of non-existence of lightlike hypersurfaces of an indefinite space form. Some geometric objects for the induced Ricci tensor to be symmetric are studied.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.238-250
• /
• 2011

In 2006, the number of days of the screen quota (theatrical movie screening days of Korean produced films in a year required by the law) was reduced to 73 days from 146 days per year. Three years after the reduction of screen quota, this paper studies the impact of reduction of screen quota system on Korean produced films. Using Non-parametric statistics, Gini Index and Regression analysis, this study shows that the average number of Korean moviegoer of Korean films which was released last three years(2007-2009) after the cutback of screen quota in 2006 is reduced to 640,109.9123 from 1,107,217.82 for three years(2003-2005) before the cutback. And this is significant in statistics. while Hollywood film gets 76,168,518 more audiences than the total number of audience for 2003-2005, the total numbers of Korean films is cut to 218,917,590 (2007-2009) from 245,802,356 (2003-2005). Gini Index of 2009(0.84) indicates that the inequality of a distribution of box office performance of Korean films is getting worse after the cutback. For now, the reduction of screen quota has negative effects for Korean films. Only the technological advance, education of relates personnel, redesigning of the related infrastructure, market-driven movies, creative production, and the promotion of the independent films can reduced the negative effects.