• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.263-272
• /
• 2012

Carbon dioxide, emitted by human activities since the industrial revolution, is regarded as a major contributor of global warming. There are many efforts to mitigate climate change, and carbon dioxide capture and geological storage (CCS) is recognized as one of key technologies because it can reduce carbon dioxide emissions from large point sources such as a power station or other industrial installation. The inclusion of CCS as clean development mechanism (CDM) project activities has been considered at UNFCCC as financial incentive mechanisms for those developing countries that may wish to deploy the CCS. Although the Conference of the Parties serving as the Meeting of the Parties to the UNFCCC's Kyoto Protocol (CMP), at Cancun in December 2010, decided that CCS is eligible as CDM project activities, the issues identified in decision 2/CMP.5 should be addressed and resolved in a satisfactory manner. Major issues regarding modalities and procedure are 1) Site selection, 2) Monitoring, 3) Modeling, 4) Boundaries, 5) Seepage Measuring and Accounting, 6) Trans-Boundary Effects, 7) Accounting of Associated Project Emissions (Leakage), 8) Risk and Safety Assessment, and 9) Liability Under the CDM Scheme. The CMP, by its decision 7/CMP.6, invited Parties to submit their views to the secretariat of Subsidiary Body for Scientific and Technological Advice (SBSTA), SBSTA prepared a draft modalities and procedure by exchanging views of Parties through workshop held in Abu Dhabi, UAE (September 2011). The 7th CMP (Durban, December 2011) finally adopted the modalities and procedures for CCS as CDM project activities (CMP[2011], Decision-/CMP.7). The inclusion of CCS as CDM project activities means that CCS is officially accredited as one of $CO_2$ reducing technologies in global carbon market. Consequently, it will affect relevant technologies and industry as well as law and policy in Korea and aboard countries. This paper presents a progress made on discussion and challenges regarding the issue, and aims to suggest some considerations to policy makers in Korea in order to demonstrate and deploy the CCS project in the near future. According to the adopted modalities and procedures for CCS as CDM project activities, it is possible to implement relevant CCS projects in Non-Annex I countries, including Korea, as long as legal and regulatory frameworks are established. Though Korea enacted 'Framework Act on Low Carbon, Green Growth', the details are too inadequate to content the requirements of modalities and procedures for CCS as CDM project. Therefore, it is required not only to amend the existing laws related with capture, transport, and storage of $CO_2$ for paving the way of an prompt deployment of CCS CDM activities in Korea as a short-term approach, but also to establish the united framework as a long-term approach.

• Journal of Distribution Science
• /
• v.10 no.7
• /
• pp.33-41
• /
• 2012

The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.455-460
• /
• 2020

The governments of Korea, China, and Japan have operated comprehensive research institutes for railway technologies. Korea Railroad Research Institute (KRRI), China Academy of Railway Sciences Corporation Limited (CARS), and Railway Technical Research Institute (RTRI) are representatives of comprehensive railway research institutes in each country. KRRI was found to be the most advanced in the quantitative competitiveness of patents. In terms of qualitative competitiveness, KRRI has strength in civil engineering, whereas RTRI has strength in electricity. KRRI was found to have the greatest efforts in securing competitiveness in overseas property rights. By comparing the publication of papers, CARS published the most papers. On the other hand, from 2015, KRRI showed an upward trend and published the most papers. By examining the impact of the papers by the citation, KRRI was found to have higher competitiveness than the other two institutions. In the future, it will be necessary to perform big data analysis on patents and papers of the three organizations, derive the key research areas and promising technology areas for each institute, and establish a mid-to-long-term development plan for railway technology based on scientific evidence.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.1
• /
• pp.73-81
• /
• 2014

A package of space science instruments, dubbed the Instruments for the Study of Space Storms (ISSS), is proposed for the Next Generation Small Satellite-1 (NEXTSat-1), which is scheduled for launch in May 2016. This paper describes the instrument designs and science missions of the ISSS. The ISSS configuration in NEXTSat-1 is as follows: the space radiation monitoring instruments consist of medium energy particle detector (MEPD) and high energy particle detector (HEPD); the space plasma instruments consist of a Langmuir probe (LP), a retarding potential analyzer (RPA), and an ion drift meter (IDM). The space radiation monitoring instruments (MEPD and HEPD) measure electrons and protons in parallel and perpendicular directions to the geomagnetic field in the sub-auroral region, and they have a minimum time resolution of 50 msec for locating the region of the particle interactions with whistler mode waves and electromagnetic ion cyclotron (EMIC) waves. The MEPD measures electrons and protons with energies of tens of keV to ~400 keV, and the HEPD measures electrons with energies of ~100 keV to > ~1 MeV and protons with energies of ~10 MeV. The space plasma instruments (LP, RPA, and IDM) observe irregularities in the low altitude ionosphere, and the results will be compared with the scintillations of the GPS signals. In particular, the LP is designed to have a sampling rate of 50 Hz in order to detect these small-scale irregularities.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2017

Recently, one of the natural disasters, landslide is causing huge damage to people and properties. In order to minimize the damage caused by continuous landslide, a scientific management system is needed for technologies related to measurement and monitoring system. This study aims to establish a management system for landslide damage by prediction of slope failure. Ground behavior was predicted by surface ground deformation in case of slope failure, and the change in ground displacement was observed as slope surface. As a result, during the slope failure, the ground deformation has the collapse section, the after collapse precursor section, the acceleration section and the burst acceleration section. In all cases, increase in displacement with time was observed as a slope failure, and it is very important event of measurement and maintenance of risky slope. In the future, it can be used as basic data of slope management standard through continuous research. And it can contribute to reduction of landslide damage and activation of measurement industry.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.2
• /
• pp.55-68
• /
• 2017

In recent years, medical practice has seen a drastic change due to the rapid, exponential expansion of scientific and medical technologies. Specially, the role of medical technologists (also known as medical laboratory scientists and/or clinical laboratory scientists) are increasing in the development of science of medical technology. As such, their responsibility has also been increasing. Therefore, given their highly specialized knowledge and skills, they are not regarded solely as doctor's assistants. Their independence and deeper specialization have been increasing, as they perform medial practices under the guidance of doctors or dentists pursuant to the "Act on Medical Service Technologists." From a legal point of view, medical guidance and scope of work were examined. As a conclusion, the definition of doctor's superintendency on the "Act on Medical Service Technologists" is required, and the qualification for the Korean license examination and their roles should be stated clearly. Moreover, communications among health professions regarding the roles of medical technologists are necessary to further facilitate clarification of their role. There is a need for independent legislation to expand the field of medical technologists and to strengthen their professionalism.

• Cartoon and Animation Studies
• /
• s.37
• /
• pp.439-461
• /
• 2014

Art has evolved into remarkable changes in its art form maintaining a close link with the contemporary scientific technologies that gave birth to new tools of expression in each era. Animation is an art form in an inextricable connection with technological aspects because it was spawned by the technical background like movies. In this regard, animation is often viewed very strongly by technical advancements in terms of an aesthetic approach. John Whitney Sr., one of the pioneers in computer graphics arts, turned his attention to the new technology called computer graphics as a means to visualize images and movement. The advent of a new medium had a strong influence not only on tools and means for novel expression but also on the gradual shift in thinking about arts and even the audiences' taste. In the 1980s, animation was combined with computer technology and the rapid progress of computer graphic technology opened up the era of new visual aesthetics, Today, the development of digital technology presents a different dimension of realism, either advocating hyperrealism by digital actors or presenting new illusionism by classic cartoon characters emphasized in a distortion or metamorphosis from a real life in order to consolidate animation realism. Based on the two perspectives mentioned above, this study can identify methods of digital character appropriation focused on the works of the ACM SIGGRAPH Asia and find how the relationship between art and technology has changed the digital realism and evolved the digital character as the digital technology has developed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.6
• /
• pp.91-101
• /
• 2019

Tourism or travel business consists of a set of services for people who visit exotic places. Payment is usually marking the end of the series of activities relating to tourism, and it becomes the linkage for the next activity. With the recent advancement of mobile Fintech technologies, we have learned that more convenient and more secure financial transactions are improving the quality of tourism. It should be noted that tourism counts on information technology heavily in terms of mobile Internet and smart devices use, which yields to a wide business opportunities for Fintech startups. However, payment information has not been highlighted for additional marketing promotion activities. The lack of research into information technology-based business models that extend Fintech services related to payment in venture start-up studies hinders the understanding of the possibility of creating new business through the value creation process after payment. This study attempts to investigate this issue based on the theory of smart tourism and service-dominant logic with developing a new information system. More specifically, marketing promotion activities after payment for Chinese tourists visiting Korea are examined. Specifically, WeChat Pay and instant tax refund service were considered while the system was developed by following desing science research methodology. This study is meaningful in that it finds a new possibility of Fintech business model by applying scientific and academic methods, and it reminds the necessity of service automation system centered on instant tax refund.

• Korea Multimedia Society
• /
• v.9 no.3_4
• /
• pp.27-35
• /
• 2005

The technologies related to the development of cultural contents we known as cultural technology (CT). CT should evolve with the changes in the cultural contents market. Currently there are five major trends in cultural market change. First, consumers are seeking more and more sensible quality from products. Second, consumers are becoming less sensitive to the cognitive quality of products. Third, consumers demand more than what contemporary technology can offer. Fourth, as the cultural products market grows, the goal of content developments has shifted from producing a 'big hit product' to producing a product which will maintain market share. Fifth, cultural products are diversifying. All these trends make the cultural products developer's job more challenging. Sensation & emotional engineering (SE engineering) can be a useful tool for cultural products developers. SE engineering is a study of the somatic sensation and the aesthetic sensation for both fundamentals and applications aspects. By quantifying the physiological and psychological responses of consumers, it studies the physical nature of stimulants, providing basic knowledge for future applications and industrialization. One widely spread myth is that a sparkling idea from a talented individual will make a difference in the cultural products industry. The careful examinations of many successful cultural products prove this is not correct. Many successful cultural products are the result of a substantial amount of investment and employment of well polished marketing technology. A scientific approach is highly required for this matter and the SE engineering is an answer

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.4
• /
• pp.401-410
• /
• 2016

Since the late 19th century, scientific logic and techniques have been used extensively in the field of clinical pathology, including many laboratory tests utilizing various apparatuses and instruments. Among the techniques to measure hemoglobin, the visual color comparison method was most popular around this time; the specific gravity method and gasometric method were not widely adopted. Instruments that use the visual color comparison method include Gowers' hemoglobinometer, von Fleischl's hemoglobinometer, Dare's hemoglobinometer, Oliver's hemoglobinometer, Haden-Hausser hemoglobinometer, and Spencer Hb meter. Initially, the visual color comparison methods were used to diluate and hemolyze blood with distilled water and then to measure its color. Later, these methods were further developed to measure hemoglobin without dilution, and improved with the formation of acid or alkaline hematin ensuring the stability of color development. Hammerschlag's method as well as the Schmaltz and Peiper's methods were based on specific gravity measurement, but they were not widely used. The gasometric method used the Van Slyke gasometer, indirectly measuring the hemoglobin concentration. This method provides the most accurate results. This survey examined the characteristics and limitations of hemoglobinometers and methods used to measure hemoglobin from the late 19th century to the early-and mid-20th century. Moreover, this study aims to improve the understanding and applicability of the current methods and emerging technologies used in measuring hemoglobin. It is also expected that this investigation is the starting point to promote awareness of the need to organize historical data for a variety of historical relics of the diagnostic laboratory tests.