• Steel and Composite Structures
• /
• v.51 no.3
• /
• pp.271-288
• /
• 2024

The primary objective of this study is to investigate the production and performance characteristics of structural concrete incorporating varying proportions (0%, 25%, and 50% by volume) of pumice stone, as well as aluminum lathe as an additive at 0%, 1%, 2%, and 3%, under fire conditions. The experiment will be conducted over a period of up to 1 hour, at temperatures ranging from 24℃, 200℃, 400℃ and 600℃. For the purpose of this, a total of twelve test samples were manufactured, and then tests of compressive strength (CS), splitting tensile strength (STS), and flexural strength (FS) were performed on these samples.Next, a comparison was made between the obtained values and the influence of temperature. To achieve this objective, the manufactured samples were placed at temperatures of 200℃, 400℃, and 600℃ for a duration of 1 hour, and were subjected to the influence of temperature.These values at 24 ℃ were then contrasted with the CS results obtained from test samples that were subjected to the temperature effect for an hour at 200 ℃, 400 ℃, and 600 ℃. A comprehensive analysis of the test outcomes reveals that the incorporation of aluminum lathe wastes into a mixture results in a significant reduction in the compressive strength of the concrete. As a result of this adjustment, the CS values dropped by 32.93%, 45.70%, and 52.07%, respectively. Furthermore, It was shown that testing the ratios of pumice stone alone resulted in a decrease in CS outcomes. Additionally, it was found that the presence of higher temperatures is clearly the primary factor contributing to the decrease in the strength of concrete. Due to elevated temperatures, the CS values decreased by 19.88%, 28.27%, and 38.61% respectively.After this investigation, an equation that explains the connection between CS and STS was provided through the utilization of the data of the experiments that were carried out.

• Korean Educational Research Journal
• /
• v.38 no.3
• /
• pp.167-188
• /
• 2018

The purpose of this study is to suggest safety education on life science inquiry activity, which subjects on the exploration and autonomous research to the relevant topics, mainly done by the science high school students. Investigation was made on subjects of research activity proposed from Life science and autonomous research from science high school students by examine thoroughly 2009 revised education curriculum. To prevent school laboratory accidents, education of basic safety regulations and general precautions should be repeatedly notified by clear statements and expression to each topic. Expressing the safety factors considering the themes of autonomous inquiry and activities presented in the course of education should be done, so that students should not experience laboratory accidents by reason of ignorance. From the beginning of organization to performing research, safety rules about disposing chemicals and tools wastes occurring during research should be noticed and expressed in precautions following waste disposal system should be adopted. It is necessary to level up the accessibility of information about the laboratory safety rules to confirm to the every student, and also ensure the takeover of the clean-up and use of utilities at the time of search end in order to prevent the incidence of laboratory accidents during the thorough stages of biological inquiry activities.

• Journal of Environmental Science International
• /
• v.13 no.3
• /
• pp.301-311
• /
• 2004

The purpose of this study was to examine teachers’ awareness of chemical waste produced in elementary school laboratory experimentation and how this awareness relates to collection and disposal of chemical waste. More specifically, the study looked at the correlation between the handling of chemical waste and factors such as years of teachers’ educational career, class size and amount of waste produced. The target population were 250 elementary school teachers in Gyeongnam area and 237 subjects were responded. Among the 237 responses, 37 cases that did not complete the questionnaire were eliminated. Therefore, 200 responses were analyzed in this study. The survey questionnaire consisted of 15 questions. The categories of the questionnaire were their skills of management and treatment of the chemical waste. The data collected were analyzed by SPSS 10.0, and the relations among variables such as class sizes and years of teaching experience were also analyzed by $x^2-test.$ The results in this study were as follows: First, there were no significant differences between the years of teaching and class sizes in the training experience of chemical waste disposal. Second, there was a significant difference between the science laboratory size and class sizes in the laboratory actual condition. In addition, in the relations between the number of times of experimentation and the years of teaching experience, there was a significant difference. Third, in terms of the discharge amount of chemical waste, there was a significant difference between the years of teaching and class sizes. Fourth, in the simple chemistry waste disposal process in the science laboratory, there also was a significant difference between the kinds of experimental equipments that used in the experimentation and the years of teaching. Based on this study, it was found that great amount of the chemical wastes produced in the science laboratory dumped into the drain and the treatment process of chemical waste was also inattentive. Even the importance of environmental education is emphasized in the elementary education, the basic problems occurred in the science laboratory is disregarded. Therefore, not only students but teachers have to pay attention to the disposal process of chemical waste in the laboratory in order to prevent environment pollution. Furthermore, the efforts of preventing environment pollution are needed such as opening the teacher training course about environment education, minimal use of chemicals, treatment of chemical waste, and so forth.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.525-536
• /
• 2009

The current residential process adheres to a traditional method of construction involving wood framing on-site on poured concrete foundations which has been widely applied in North America. A conventional residential construction process can include seventeen distinct stages ranging from stake-out to pre-occupancy inspection. The current practice possesses short comings including high construction material wastes, long scheduling timelines, adverse weather conditions, poor quality, low efficiencies and negative environmental impacts from transportation and equipment use. Over CAN $5 billion dollars was spent in the construction sector during 2007 in Canada. Previous findings in CO₂ emissions during the construction process of a conventional dwelling emphasize more than 45 tonnes of CO₂ emissions. Hence, in Alberta alone during 2007, almost 50,000 residential units would release more than two million tonnes of CO₂. These numbers demonstrate the economical and environmental impact in building construction and its relationship with CO₂ emissions. The aim of this paper is to quantify the CO₂ emissions from the current residential construction process in order to establish the baseline for CO₂ emission reduction opportunities. The quantification collection methodology will be approached by identifying the seventeen various stages of construction and quantifying the contributions of CO₂ from specific activities and their impacts of work for each stage. The approach of separating these into separate stages for collection will allow for independent opportunities for analysis from various independent contractors from the entire scope of work. The use of BIM will be implemented to efficiently quantify CO₂ emissions. Based on the CO₂ quantification baseline, emission reduction opportunities such as an industrialized construction process will be introduced that allows homebuilders to reduce the environmental and economical impact of home construction while enabling them to produce higher quality, more energy efficient homes in a safer and shorter period of time.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1337-1343
• /
• 2007

The aim of this study was to isolate chicken feather-degrading bacteria with high keratinolytic activity and to investigate cultural conditions affecting keratinolytic enzyme production by a selected isolate. A chicken feather-degrading bacterial strain CH3 was isolated from poultry wastes. Isolate CH3 degraded whole chicken feather completely within 3 days. On the basis of phenotypical and 16S rDNA studies, isolate CH3 was identified as Bacillus thuringiensis CH3. This strain is the first B. thuringiensis described as a feather degrader. The bacterium grew with an optimum at pH 8.0 and $37^{\circ}C$, where maximum keratinolytic activity was also observed. The composition of optimal medium for keratinolytic enzyme production was feather 0.1%, sucrose 0.7%, casein 0.3%, $K_2HPO_4$ 0.03%, $KH_2PO_4$ 0.04%, $MgCl_2$ 0.01% and NaCl 0.05%, respectively. The keratinolytic enzyme had a pH and temperature optima 9.0 and $45^{\circ}C$, respectively. The keratinolytic activity was inhibited ethylenediaminetetraacetic acid, phenylmethylsulfonyl fluoride, and metal ions like $Hg^{2+},\;Cu^{2+}\;and\;Zn^{2+}$. The enzyme activated by $Fe^{2+}$, dithiothreitol and 2-mercaptoethanol.

• Journal of Ecology and Environment
• /
• v.31 no.4
• /
• pp.333-339
• /
• 2008

We investigated death rates, growth rates and recruitment of culms in two neighboring bamboo (Phyllostachys bamboosoides) stands nested in by two different bird species to analyze stand structure and to design conservation strategies. A third bamboo grove not used by birds, the Taewha stand, was included as a control stand. The bamboo stand occupied by birds in the family Ardeidae (the Ardeidae stand) had an approximately 1.5 times higher culm density than the stand occupied by birds in the family Corvidae (the Corvidae stand). The crude death rate and the number of newly emerged shoots were also higher in the Ardeidae stand than the Corvidae stand. The death rate for bamboo in the Ardeidae stand was not dependent on diameter at breast height (DBH) and was almost 40% for culms of all sizes, whereas most dead culms in the Corvidae stand were < 4 cm DBH. Consequently, we conclude that in the Ardeidae stand, density-independent causes of death are operating, while density-dependent factor are more important in the Corvidae site. The results of soil analysis in these stands suggest that the density-independent death pattern observed in the Ardeidae stand may be due to soil acidification resulting from wastes produced by the birds during breeding. On the other hand, the culm distribution and death patterns in the Corvidae stand suggest that the stand characteristics were not affected by the nesting birds. These results suggest that different conservation strategies must be applied to conserve bamboo groves used by ardeids and corvids for nesting.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.1
• /
• pp.21-25
• /
• 2014

A drying machine for discarded Citrus scrap was developed in this study. The Citrus produced in Jeju Province was treated as wastes (a) after making a beverage, such as drinking juice, and (b) if the size of the product did not fit with its agricultural product criteria. Various types of drying machine were developed in this study, and different kinds of technologies were combined improve the performance. To enhance the performance, the system was maintained in a vacuum state, and a high frequency micro wave was activated to the waste Citrus scrap, to heat up the moisture inside the Citrus kernels. The frequency of the micro-wave was 2.6 GHz, which is the resonant frequency of the molecules. Experiments were conducted with a vacuum of 50, 100, 150, 300, 500, and 700 mbar. The waste Citrus scrap has two types of status : (a) original scrap, and (b) mixed with blender. As results, specimen (a) shows a 0.13 g/sec evaporation rate, while specimen (b) shows a 0.19 g/sec rate, at 50 mbar of environment vacuum condition. For the drying efficiency, specimens (a) and (b) show 0.15 g/W and 0.24 g/W, respectively.

• Korean Management Science Review
• /
• v.33 no.2
• /
• pp.11-28
• /
• 2016

This study empirically investigated the relationships among external factors (i.e., the imitation, compulsory and normative pressures, and governmental regulation), proactive environmental strategy, the adoption of green-supply chain management (GSCM) techniques, green corporation with suppliers, environmental performance, and organizational performance. To empirically demonstrate the relationships, 78 sample firms' data were collected from Korean manufacturing firms that are listed on the Korean stock market. The results of this study showed that a proactive environmental strategy mainly and positively influences the adoption of GSCM, and the introduction of a proactive environmental strategy is significantly and positively affected by governmental regulation. It was also found that governmental regulation has an indirect impact on the adoption of GSCM through the introduction of a proactive environmental strategy. Thus, it is asserted that governmental regulation, in Korean manufacturing firms, is the unique external factor on the adoption of a proactive environmental strategy, which facilitates the use of GSCM techniques. According to the results, it was observed that GSCM positively influences the levels of green corporation, and both GSCM and green corporation have positive effects on the improvement of environmental performance. Hence, it is suggested that the implementation of GSCM inevitably brings high degrees of green collaboration with suppliers. Finally, it was found that environmental performance has a significant and positive impact on the organizational performance of a firm. This result implies that high degrees of environmental performance, which bring both the efficient usage of materials and energy and the elimination of wastes, can lead to the increase of organizational performance.

• Journal of Science Education
• /
• v.34 no.2
• /
• pp.320-326
• /
• 2010

This study explored the current status of ecocentric environmental education in alternative schools. We analyzed the aims, curriculum, environmental activities of 42 alternative schools in Korea from their homepages and guidebooks. For more information, additional interviews with teachers were also conducted. As a resuts, the ratio of schools aiming ecologism were relatively low, however, 36 (85.7%) of 42 alternative schools included ecologism in their educational goals directly or indirectly. 39 schools included an environmental education in their curriculum, and 3 environmental class was opened in a week on the average. The most frequently used environmental activity in alternative schools was "recycling of solid wastes", and then "reducing use of disposable products", and "using environment-friendly, and recycled products" were followed. "Using water-purifier tank" and "using alternative energy" were also practiced. Educational implications of results were discussed.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.367-371
• /
• 2012

Waste printed circuit boards (WPCBs) contain valuable metals such as Cu, Ni, Au, Ag, and Pd. For an effective recycling of WPCBs, it is essential to recover the valuable metals. In recent years, recycling processes have come to be necessary for separating noble metals from WPCBs due to an increasing amount of electronic device wastes. However, it is well known that glass reinforced epoxy resins in the WPCBs are difficult materials to separate into elemental components, namely metals, glass fibers and epoxy resins in the chemical recycling process. $K_3PO_4$ as a catalyst in dimethylformamide (DMF) and N-Methyl-2-pyrrolidone (NMP) was used to depolymerize epoxy resins for recovering metallic and non-metallic components from WPCBs. Reactions of WPCBs were carried out at temperatures $160{\sim}200^{\circ}C$ for 2~12 h. The recycled glass fiber from WPCBs was analyzed by thermogravimetric analyzer (TGA) and evaluated the degree of solubility of the epoxy resin for separation efficiencies of the WPCBs.