• 한국병원경영학회지
• /
• 제12권2호
• /
• pp.93-111
• /
• 2007

The thrust in this paper is to discuss the dimensions of executive scanning process (ESP) that support continuous scanning activities by executives. Executive scanning is especially important for the healthcare organizations in these days since the environment they are faced with is extremely complex and dynamic. While much has been written about ESP, two important aspects have been underemphasized in the past. The first is a link to the strategic management process (SMP) or the issue of strategy-scanning alignment. The second is a feedback loop to verify the quality of information generated through scanning process. This paper discusses the improved ESP by adding these two features.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.17-18
• /
• 2015

In manufacturing industry, image scanning technique has made enormous progress in past decades. 3D models have been also very important to continuously monitor the related spatial information for freeform buildings. The process of shape making of 3D scanning is as follows: mesh surface segmentation, NURBS surface generation, and parametric solid model generation. We will review the process and applying process. Especially in the construction industry, 3D data collection by laser scanning has become an high quality 3D models. Therefore, in this research, we have an effort to review construction of reverse design process for freeform envelope using 3D scanning. The technology enables many 3D shape engineering and design parameterization of reverse engineering in the construction site.

• 한국실내디자인학회논문집
• /
• 제23권5호
• /
• pp.76-85
• /
• 2014

When conscious and unconscious exploring information of space-visitors which is contained in the information acquired in the process of seeing any space is analyzed, it can be found what those visitors pick up as factors in the space for its selection as visual information in order to put it into action. This study, with the object of the space reproduced in three dimensions from the cafe which was visited for conversation, has analyzed the process of acquiring space-information by sex to find out the features of scanning path, findings of which are the followings. First, the rate of scanning type of males was "Combination (50.5%)- Circulation (31.0%) and that of females "Horizontal (32.5%) - Combination (32.1%)", which shows that there was a big difference by sex in the scanning path which took place in the process of observing any space. Second, when the features of continuous observation frequency by sex is looked into, the trends of increased "horizontal" scanning and decreased "Combination" scanning of both showed the same as the frequency of continuous observations increased, while in case of "Circulation" scanning, that of females was found to decrease but that of males showed the aspect of confusion. Third, the 'Combination' scanning of males was found strong at the short observation time with three times of continuous observation frequency defined as "Attention Concentration" while the distinct feature was seen that the scanning type was dispersed to "combination-circulation" as the frequency of continuous observation increased. Females start the information acquirement with "combination-circulation" but in the process of visual appreciation they showed a strong "Horizontal" These scanning features can be defined as those by sex for acquiring space information and therefore are very significant because they are fundamental studies which will enable any customized space-design by sex.

• 한국BIM학회 논문집
• /
• 제11권2호
• /
• pp.33-42
• /
• 2021

In construction sites, policies are changing considering the convergence of 3D scanning and BIM. In order to respond to this, it is urgent to develop guidelines for systematic collaboration methods that take into account the perspectives of practitioners. By participating in the delivery process using 3D scanning technology, tasks such as ordering, field scanning are defined in terms of mutual communications. Also, the collaboration process is about communications between off-site and on-site, such as feed-back using data and documents. In the future, we will propose guidelines based on such collaborative process models.

• 한국레이저가공학회지
• /
• 제18권3호
• /
• pp.6-8
• /
• 2015

Finishing process includes deburring, polishing and edge radiusing. It improves the surface profile of specimen and eliminates the alien substance on surface. Deburring is the elimination process for debris of edges. Polishing lubricates surfaces by rubbing or chemical treatment. There are two types for electron finishing. The one is using pulse beam. The other is using the convergent and scanning electron beam. Pulse type device appropriates the large area process. But it does not control the beam dosage. Scanning type device has advantages for dosage control and edge deburring. We design the convergence and scan type. It has magnetic lenses for convergence and scan device for scanning beam. Magnetic lenses consist of convergent and objective lens. The lenses are designed by the specification(beam size and working distance). In this paper, we evaluate the convergence performance by pattern process. Also, we analysis the results and important factors for process. The important factors for process are beam size, pressure, stage speed and vacuum. These results will be utilized into systematizing pattern shape and the factors.

• 한국실내디자인학회논문집
• /
• 제23권6호
• /
• pp.115-124
• /
• 2014

This study has carried out scanning tests in order to figure out the features of scanning search by sex of space users, with the result of which the validity of data has been estimated. In this research, the scanning patterns were set up for verifying the typology of scanning paths and then the reason for determining scanning paths and the validity of estimation method were reviewed. Since the observation features depends on sex, the analysis of visual activities for acquiring any information in a space will reveal the intention and purpose of space users. The findings by analyzing the features of scanning pattern by sex which were found at the determination of scanning patterns can be defined as the followings. First, for estimating the process of space-information search, the movement distance at each point of continuative-observation data from the angle of eye-movement has been extracted, on the ground of which the fixation and movement of eye have been defined for the establishment of scanning-cut characteristics. Second, the scanning times were estimated for the extraction of effective observation data that would be used for comparative analysis, which showed that men had more data (3,398.2/64.4%) than women (2,998.2/55.6%). This enables the acknowledgment that the scanning cut of men was relatively less, which indicates that men will acquire more information on space than women in the process of observing any space. Third, men's scanning times (58.0 times/2.02 seconds) were less than those of women (71.9 times/1.39 seconds) while the scanning time of the former was longer than that of the latter, which shows the feature that it takes longer for men than women in scanning while the scanning times of the former is less than those of the latter. Fourth, the observation features can be determined that the combination of this result with the predominance character by sex for a general viewpoint to be employed indicates that while men employ mixed-scanning for observation activities to acquire space-information spending for longer time, women, by concentrated-scanning, focus on a single point for shorter time or stay at one location for a considerably long time for space-information acquirement.

• Composites Research
• /
• 제33권2호
• /
• pp.44-49
• /
• 2020

본 연구에서는 시차주사 열량계(differential scanning calorimetry, DSC)를 이용하여 진공백 성형 공정에 사용되는 탄소 섬유 프리프레그의 경화 거동을 연구하였다. 프리프레그를 이용한 동적주사 시험을 통해 전체 발열량(ΔH_total = 537.1 J/g)을 측정하였고, 130℃~180℃에서 등온주사 시험을 실시하였다. 등온주사 시험의 결과는 온도가 올라감에 따라 발열 반응이 증가되는 것을 확인하였다. 시험 결과를 토대로 수지의 경화 거동을 분석하기 위하여 Kratz 모델을 적용하였다. 서로 다른 경화 사이클로 제작된 평판의 경화도를 경화 예측 모델과 실험값을 비교하였다. 경화 예측 모델은 실험값 대비 3.4% 이하의 오차율을 보여 결과가 잘 부합하는 것을 확인하였다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2005년도 추계학술대회 논문집
• /
• pp.6-10
• /
• 2005

PIV(Particle image velocimetry) presents the flow velocity of whole flow fields in a fraction of a second. Conventional PIV method uses two optical axis configuration during the image grabbing process. That is, the illumination plane and the recording plane must be parallel. This configuration is very natural to grab the whole field without the image distortion. In the real problem, it is often to meet the situation which this configuration is hard to be fulfilled. In this study, we developed new PIV method which only uses single optical axis to grab the particle images. This new PIV method become possible by utilizing the scanning method similar to echo PIV technique. One particle image of scanning PIV consists of scanned several line images and by repeating this scanning process, two particle images were grabbed and processed to produce the velocity vectors.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.181-187
• /
• 2007

Conventional PIV method uses two optical axis configuration during the image grabbing process. That is, the illumination plane and the recording plane must be parallel. This configuration is very natural to grab the whole field without the image distortion. In the real problem, it is often to meet the situation when this configuration is hard to be fulfilled. In the present study, the new PIV method which uses only single optical axis to grab the particle images is developed. This new PIV method becomes possible by utilizing the scanning method similar to the echo PIV technique. One particle image of the scanning PIV consists of scanned several line images and by repeating this scanning process, two particle images were grabbed and processed to produce the velocity vectors. An optimization study was performed to find parameters which minimize the measurement errors. The effects of particle diameter, beam overlap ratio and particle number density were investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1085-1088
• /
• 2001

The process of styrofoam pattern that has been used for material of press die pattern depends chiefly on handwork. Laser manufacturing system developed to increase precision and efficiency of process that is also able to convert the design easily. Applying the RP(rapid prototyping) concept reversely, the unnecessary part of section is vapored away by heat source of laser beam after converting 3-D CAD model into cross-sectional shape information. Laser beam is line-scanned in plane specimens to measure the depth and width of cut, surface roughness, cross-sectional shape as converting laser power, scanning speed, cutting gas pressure. With these basic data, plane surface, inclined surface, hole, outer contour trimming process is experimented and optimum condition are obtained. In plane and inclined surface experiments, 15W laser power and 50mm/s scanning speed make superior processing property and 30W, 10mm/s make processing efficiency increase in trimming process. With these results, simple patterns were manufactured and the possibility of applying laser manufacturing system to styrofoam pattern was convinced.