• Asian Journal of Atmospheric Environment
• /
• 제11권4호
• /
• pp.300-312
• /
• 2017

To improve the understanding of secondary organic aerosol (SOA) formation from the photo-oxidation of anthropogenic and biogenic precursors at the regional background station on Baengnyeong Island, Korea, gas phase and aerosol chemistries were investigated using the Proton Transfer Reaction Time of Flight Mass Spectrometer (PTR-ToF-MS) and the Aerodyne High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS), respectively. HR-ToF-AMS measured fine particles ($PM_1$; diameter of particle matter less than $1{\mu}m$) at a 6-minute time resolution from February to November 2012, while PTR-ToF-MS was deployed during an intensive period from September 21 to 29, 2012. The one-minute time-resolution and high mass resolution (up to $4000m{\Delta}m^{-1}$) data from the PTR-ToF-MS provided the basis for calculations of the concentrations of anthropogenic and biogenic volatile organic compounds (BVOCs) including oxygenated VOCs (OVOCs). The dominant BVOCs from the site are isoprene (0.23 ppb), dimethyl sulphide (DMS, 0.20 ppb), and monoterpenes (0.38 ppb). Toluene (0.45 ppb) and benzene (0.32 ppb) accounted for the majority of anthropogenic VOCs (AVOCs). OVOCs including acetone (3.98 ppb), acetaldehyde (2.67 ppb), acetic acid (1.68 ppb), and formic acid (2.24 ppb) were measured. The OVOCs comprise approximately 75% of total measured VOCs, suggesting the occurrence of strong oxidation processes and/or long-range transported at the site. A strong photochemical aging and oxidation of the atmospheric pollutants were also observed in aerosol measured by HR-ToF-AMS, whereby a high $f_{44}:f_{43}$ value is shown for organic aerosols (OAs); however, relatively low $f_{44}:f_{43}$ values were observed when high concentrations of BVOCs and AVOCs were available, providing evidence of the formation of SOA from VOC precursors at the site. Overall, the results of this study revealed several different SOA formation mechanisms, and new particle formation and particle growth events were identified using the powerful tools scanning mobility particle sizer (SMPS), PTR-ToF-MS, and HR-ToF-AMS.

• 한국대기환경학회지
• /
• 제33권2호
• /
• pp.124-138
• /
• 2017

Physico-chemical measurement of non-refractory submicron particles($NR-PM_1$) was conducted in Baengnyeong Island, Korea using Aerodyne High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS) from 2012 to 2014. Organics and ammoniated sulfate were dominant species in $NR-PM_1$. The organics was found to have similar fractions(approximate 40%) of $NR-PM_1$ during the summer and winter, while the sulfate fractions of $NR-PM_1$ were calculated to be approximately 47% and 31% for the summer and winter, respectively, suggesting the possibility that particles provide non-acidic surfaces for condensation of nitric acid in the winter. The nitrate fractions of approximate 4% and 20% of $NR-PM_1$ were observed in August (summer) and November (winter), respectively, resulting that the relatively low concentration of sulfate in $NR-PM_1$ provided a non-acidic surface for nitric acid condensation and formation of particulate ammoniated nitrate is favored thermodynamically in winter. The new particle formation (NPF) event and particle growth rate were analyzed for each month in 2014 using Scanning Mobility Particle Sizer(SMPS). The Percent of NPF events was the highest in winter, but NPF event was not observed during summer due to relatively high temperature and frequent rainfall. The average particle growth rate was 3.5 nm/h and the highest particle growth rate was 5.5 nm/h in May. We observed the long-range transport of the anthropogenic sulfate from the East Asia during the intensive monitoring period of November between Qingdao and Baengnyeong Island in 2013. The relatively high concentrations of m/z 60 measured in HR-ToF-AMS was observed in May and June at Baengnyeong Island, suggesting the possibility of the influence of biomass burning from the East Asia to the Korean Peninsula.

• 한국산업보건학회지
• /
• 제26권2호
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.

• 한국대기환경학회지
• /
• 제29권2호
• /
• pp.125-134
• /
• 2013

Various antimicrobial technologies have been developed to inactivate bioaerosols in indoor environments. In this study, air filter media were treated with a natural antibacterial agent of Sophora flavescens in order to inactivate the bacteria collected on the air filter. Three treatment methods were applied to manufacture the test antibacterial air filter media: electrospray, nebulization and dip-coating methods. In case of electrospray and nebulization processes, the size distribution of aerosolized natural antibacterial agent was measured using a scanning mobility particle sizer. Staphylococcus epidermidis bacteria were aerosolized to test inactivation of the filter media treated with a natural antibacterial agent. The pressure drop and the antibacterial efficiency of the filter media increased with increasing the mass loading of natural antibacterial agent in each treatment method. The antibacterial efficiency per loaded antibacterial agent mass by the electrospray method was the highest and the filter treated by the dip-coating method was the lowest among three treatment methods.

• 대한기계학회논문집B
• /
• 제34권4호
• /
• pp.423-428
• /
• 2010

반도체 공정에서 배출되는 미세입자를 포집하기 위하여 전기집진장치가 적용되고 있으나, 배출가스 내 포함된 강부식성 오염원에 의한 전기집진장치 내부 오염 및 부식 문제가 심각하여, 이를 해결하기 위한 방안이 절실하다. 본 연구에서는 탄소섬유로 이루어진 하전부와 PET 필름 사이에 금속 박막이 삽입된 집진부로 이루어진 내부식 전기집진장치를 개발하여, 하전부 및 집진부 인가전압, 처리유량, 하전부 채널 수 등의 운전 조건에 따른 전기집진기의 초미세입자 집진 성능을 평가하였다. 평균입경이 100 nm인 KCl 입자를 시험입자로 사용하였으며, 전기집진기 전/후단 입자 농도 변화를 측정하기 위하여 SMPS를 사용하였다. 본 연구에서 개발된 9채널 하전부와 65 mm 집진부로 구성된 전기집진기의 성능평가 결과, $500\;m^3/hr$ 유량조건에서 하전부 및 집진부에 7 kV와 10 kV를 각각 인가하였을 때, 300 nm입자에 대한 포집효율이 90% 이상으로 높게 나타났다.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.112-117
• /
• 2012

나노기술의 발전과 함께 나노물질을 포함한 소비재가 대중화되고 있다. 그러나 지난 10여년간 조심스럽게 제기되고 있는 나노물질의 잠재적 위해성으로 인해, 나노제품 사용을 불안해하고 있다. 특히 나노제품을 직접 취급하는 생산시설(연구소 및 업체)의 작업자는 직접적인 인체 노출을 초래하게 된다. 따라서 이들에 대한 인체 및 환경 노출 안전관리를 위하여, 직접적인 노출평가가 필요하다. 본 연구에서는 기상 및 액상 반응을 통해 나노물질을 생산하는 두 곳의 업체를 현장 방문하여 나노물질의 주요 노출대상 공정과 노출원을 파악하고 SMPS를 이용한 실시간 현장 모니터링을 실시하였다. 분석 결과, 액상 공정도 기상으로의 나노입자 노출이 심각하게 발생하고 있음을 확인하였다. 가장 문제가 되는 점은 나노물질의 잠재적인 위해성에 관한 인식의 부족으로 제대로 된 방호활동을 못하고 있다는 점이다. 따라서 보다 다양한 나노물질 취급 시설에 대한 환경노출 평가가 필요하고 이를 바탕으로 한 나노물질 취급 안전관리 방법이 제시되어야 한다.

• 청정기술
• /
• 제28권2호
• /
• pp.123-130
• /
• 2022

나노입자는 화학, 의학, 환경, 정보통신 등 다양한 생활 분야에 활용되고 있다. 나노물질 사용량의 증가는 작업장 및 환경중 나노물질 노출을 증가시킨다. 그러나 관련 연구는 이제 초기연구에 그치고 있다. 나노제품내 함유된 100 nm 이하의 나노입자가 비의도적으로 배출되게 되면, 호흡이나 피부노출을 통해 인체에 잠재적인 위험을 초래할 수 있다. 본 연구에서는 실험실로부터 사무실로의 나노입자의 잠재적 노출 가능성을 확인하였고, 나노입자 안전 가이드라인을 제언하고자 한다. 실험 진행 중 대기로의 나노입자 발생을 확인하기 위해 나노입자 포집기를 사용하였으며, 실시간 입자측정기를 통해 실험실과 사무실에서 나노입자 농도가 유사한 경향을 보이는 것을 확인하였다. 또한 실험복에 부착 된 나노입자가 실험실 외부로 이동한다고 가정하고, 나노 카본블랙을 부착시킨 실험복을 일정시간 털어준 뒤 실험복내 잔류된 입자의 농도를 확인하였다. 실험 결과, 실험복에 부착된 나노입자는 실험자의 동선을 따라 실험실에서 사무실로 충분히 이동할 수 있음을 확인하였고, 나노입자를 취급하는 실험실의 의복에 관한 안전 가이드라인이 필요함을 확인하였다.