• Journal of Microbiology and Biotechnology
• /
• v.23 no.9
• /
• pp.1287-1292
• /
• 2013

Extracellular biogenic synthesis of silver nanoparticles with various shapes using the rice bacterial blight bacterium Xanthomonas oryzae pv. oryzae BXO8 is reported. The synthesized silver nanoparticles were characterized by UV-Vis spectroscopy, powder X-ray diffractometry (XRD), scanning electron microscopy, energy dispersive X-ray spectrometry, and high-resolution transmission electron microscopy (HR-TEM). Based on the evidence of HR-TEM, the synthesized particles were found to be spherical, with anisotropic structures such as triangles and rods, with an average size of 14.86 nm. The crystalline nature of silver nanoparticles was evident from the bright circular spots in the SAED pattern, clear lattice fringes in the high-resolution TEM images, and peaks in the XRD pattern. The FTIR spectrum showed that biomolecules containing amide and carboxylate groups are involved in the reduction and stabilization of the silver nanoparticles. Using such a biological method for the synthesis of silver nanoparticles is a simple, viable, cost-effective, and environmentally friendly process, which can be used in antimicrobial therapy.

• Elastomers and Composites
• /
• v.24 no.3
• /
• pp.193-202
• /
• 1989

An experimental study of the development of carbon black dispersion by an internal mixer and its characterization is presented. We describe the measurement of carbon black agglomerate size and related characteristics using four different experimental techniques : optical microscopy, scanning elctrion microscopy, surface roughness, and electrical couductivity. The results from these different experiments are compared uning the same carbon black for a series of six different butadiene-styrene copolymers. The results from the different techniques are cross plotted and are critically discussed. It is found that surface but then sharply deteriorate. At subsequent stages of mixing optical microscopy seemed the most reliable measure.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.286-286
• /
• 2006

We report on a fascinating morphology; giant spherical conducting polythiophene by the in-situ gamma radiation-induced chemical polymerization method. The resultant micron-size buckyball-shaped polymer structures were identified by high resolution transmission electron microscopy and scanning electron microscopy. Different characterizations e.g. Fourier transform infrared, x-ray diffraction, and x-ray photoelectron microscopy were utilized to prove that the new morphological conducting polythiophene was synthesized successfully by this novel method.

• Journal of the Korean Vacuum Society
• /
• v.11 no.4
• /
• pp.256-260
• /
• 2002

Carbon nanotubes on metal(SUS304) substrates were synthesized by using micro-wave plasma-enhanced chemical vapor deposition at $650^{\circ}C$ with gas mixture CH$_4$(11%) and H$_2$(89%). Their structure was investigated by scanning electron microscopy and transmission electron microscopy. Raman spectroscopy was also used to justify the structure and crystallinity of graphite sheets. High-resolution transmission electron microscopy images clearly showed carbon nanotubes to be multwalled. The measured turn-on field and current density obtained from I-V measurement were 4.4 V/$\mu \textrm{m}$ and $8.4\times10^1\mu\textrm{A}/\textrm{cm}^2$, respectively.

• Applied Microscopy
• /
• v.42 no.4
• /
• pp.194-199
• /
• 2012

The anatomy and morphology of seeds from 10 Hawaiian Portulaca taxa were examined to explore patterns of variation among the taxa, and to evaluate their phylogenetic relationships. Features of seeds were assessed employing microtechnique procedures, statistical analysis, and scanning electron microscopy (SEM). Anatomically, the orientation of embryo was consistent across taxa, and all seeds examined had central nutritive tissue and integuments comprising the peripheral embryo. Seeds were generally small, circular to ovoid in shape, and either smooth or rough-surfaced, with tubercules. Variation in seed size was noted, although minimal within small seeded group. The size of seeds ranged from 0.50~1.26 mm in length, and 0.55~1.34 mm in width, with similar weights. Seeds were distinguished by the sculpture and arrangement of the testa epidermis and the way in which their stellulate-tessellate cells uniquely fit together. Using a multiple range test (ANOVA), two groups were established by seed characteristics. The SEM also demonstrated morphological differences in testa sculpturing. The results obtained confirm the usefulness of seed characteristics in the identification of the species examined, and furthermore, allow for the separation of the Hawaiian Portulaca into two groups.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.284-284
• /
• 2010

We report a fabrication of 6, 13-bis(triisopropylsilylethynyl) (TIPS) pentacene nanowires that made on Si substrates by liquid bridge-nanotransfer molding (LB-nTM) with polyurethane acrylate (PUA) mold. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid bridge between them. In liquid bridge-transfer process, the liquid layer serves as an adhesion layer to provide good conformal contact and form covalent bonding between the TIPS-pentacene nanowire and the Si substrate. The patterned TIPS-Pentacene nanowires have been investigated by Atomic force microscopy (AFM), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM) and electrical properties.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.536-536
• /
• 2012

나노와이어는 센서, 메모리소자, 태양전지등과 같은 다양한 소자로 응용이 되고 있다. Bottom-up 방법으로 길러진 나노와이어들을 금속전극 위에 정렬 및 접합시킬 때, 나노와이어와 금속전극간의 기계적 접합강도와 안정적인 전기적 특성이 매우 중요하다. 본 연구에서는 열압착 공정과 솔더전극(Cr/Au/In/Au, Cr/Cu/In/Au)을 사용함으로써, 나노와이어를 금속전극에 압입시켜 강한 기계적 접합강도와 안정적인 전기적 특성을 얻을 수 있는 공정을 제안하였다. 나노와이어와 금속 전극간의 접합부 분석을 위해 scanning electron microscopy (SEM)와 transmission electron microscopy (TEM)을 이용하였으며, 기계적 특성은 lateral force microscopy (LFM), 전기적 특성은 semiconductor analyzer (Keithley 4200-SCS)를 사용하여 측정하였다. 접합강도 측정결과 lateral force가 나노와이어에 가해질 때 나노와이어가 파괴되는 힘에서도 나노와이어와 금속전극간의 접합부파괴가 일어나지 않았다. 또한 나노와이어와 금속전극간의 전기적 접촉특성은 안정적인 ohmic contact을 이루었다.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.8-16
• /
• 2015

We prepared a novel electrochemical gas sensor (EG sensor) based on interdigitated electrode (IDE) coated with vinyl ionic liquids (ILs) as electrolyte and Pt-Ru-Mo/MWNT electrocatalysts for occurring redox-active of CNCl gas. The vinyl ILs such as 1-butyl-3-(vinylbenzyl)imidazolium chloride, $[BVBI]^+Cl^-$, and 3-hexyl-1-vinylimidazolium bromide, $[HVI]^+Br^-$, were synthesized by $SN_2$ reaction in order to use electrolyte. The Pt-Ru-Mo/MWNT electrocatalysts were also prepared by one-step radiation-induced reduction of metal ions in the presence of MWNTs as supports. The fabricated EG sensor with vinyl ILs electrolyte was evaluated through optical microscopy (OM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The prepared EG sensor is clearly detected over 2.0 ppm CNCl gas and is exhibited a liner relationship between current and concentration over a region of 10-100 ppm.

• Journal of Powder Materials
• /
• v.24 no.4
• /
• pp.285-291
• /
• 2017

We propose a custom analysis technique for the dark field (DF) image based on transmission electron microscopy (TEM). The custom analysis technique is developed based on the $DigitalMicrograph^{(R)}$ (DM) script language embedded in the Gatan digital microscopy software, which is used as the operational software for most TEM instruments. The developed software automatically scans an electron beam across a TEM sample and records a series of electron diffraction patterns. The recorded electron diffraction patterns provide DF and ADF images based on digital image processing. An experimental electron diffraction pattern is recorded from a IrMn polycrystal consisting of fine nanograins in order to test the proposed software. We demonstrate that the developed image processing technique well resolves nanograins of ~ 5 nm in diameter.

• Applied Microscopy
• /
• v.27 no.4
• /
• pp.473-481
• /
• 1997

Disorder-order transformation of nanocrystalline FeAl have been investigated by a combination of electron and X-ray diffraction analysis including high resolution electron microscopy and differential scanning calorimetry. Fe-50at.%Al powders mechanically alloyed for 90 hours consist of $5\sim10$ nm size grains haying either disordered b.c.c. structure or amorphous structure. X-ray and electron diffraction of mechanically alloyed FeAl powders show that disorder-order transformation occurs at the temperature range of $300^{\circ}C\sim320^{\circ}C$. Such a low-temperature ordering behavior exhibiting an exothermic reaction is attributable to the nm-scale grain structure with a large amount of defects accumulated during mechanical alloying process.