• 제목/요약/키워드: scanning electron microscope

검색결과 3,254건 처리시간 0.03초

수종(數種) 근관세척액(根管洗滌液)의 양(量)의 차이(差異)에 따른 근관정화효과(根管淨化效果)에 관(關)한 주사전자현미경적(走査電子顯微鏡的) 연구(硏究) (A SCANNING ELECTRON MICROSCOPIC STUDY OF THE CLEANSING EFFECT OF THE VARIOUS IRRIGANTS ACCORDING TO DIFFERENT QUANTITY)

  • 여인호
    • Restorative Dentistry and Endodontics
    • /
    • 제7권1호
    • /
    • pp.7-15
    • /
    • 1981

  • This study was conducted to compare the cleansing effect of various irrigants and the function of the quantity of irrigants in apical region. One hundred sixty single rooted teeth were divided into four groups and fourty teeth in each group were individually enlarged and irrigated with each of four irrigants as they would be during clinical condition. The four tested irrigants were Normal saline solution, 3.5% NaOCl, 15% EDTA, and 50% Citric acid. In each group, twenty teeth were flushed with 2cc of each irrigant and another twenty teeth with 5cc of same irrigant after use of each instrument. After final flush and dry, the roots were split longitudinally and the degree of cleansing at apical portion were evaluated under Stereoscope by three observers. The typical specimens of each group were also examined under Scanning electron microscope. The results were as follows. 1. There were no significant difference of cleansing effect among the tested irrigants. 2. 5cc flushed groups have more samples that have high degree of cleansing than 2cc flushed groups. 3. The canals irrigated with 2cc showed the presence of many dentin chips, tissue debris and smeared layer, whereas the 5cc groups revealed relatively clean canal surface and less smeared layer under Scanning electron microscope. 4. The teeth flushed with 5cc of EDTA and with 5cc of Citric acid showed the most clean canal surface at Scanning fictures.

  • PDF

포유류 조직비만세포의 주사전자현미경적 연구 (Scanning Electron Microscopic Study on the Tissue Mast Cells of Mammals)

  • 강호석;유기수
    • Applied Microscopy
    • /
    • 제13권1호
    • /
    • pp.41-47
    • /
    • 1983

  • A Scanning electron microscope which can obtain additional information not readily available with either the light or transmission electron microscope was used to study the mast cell shape and its granules in normal mammal tissue(rat mesentery, stomach and mouse stomach) by fretting cut using liquid nitrogen. The results showed that rat mesentery and mouse stomach mast cell surfaces had no ridges and microvilli, but revealed several microvilli projecting into the surrounding connective tissue in the rat stomach mast cell. The shape of the mast cell varied from discoid(in the rat mesenteric mast cell) to ellipsoid (rat and mouse stomach), ranging from 7.5 to $10{\mu}m$ in diameter. The shape of the nucleus was ellipsoid and nucleic membrane was adherent to the outer surface of the granules. The granules, approximately 0.2 to $0.9{\mu}m$ in diameter, were various shapes. Frequently, rounded protrusions of cytoplasmic granules could be discerned under the cell membrane. Many small granules were seen in the cytoplasm.

  • PDF

석면 분석방법에 대한 고찰 (Review on asbestos analysis)

  • 함승헌;황성호;윤충식;박동욱
    • 한국산업보건학회지
    • /
    • 제19권3호
    • /
    • pp.213-232
    • /
    • 2009

  • This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.

  • PDF KSCI

다층 PCB 빌드업 기판용 마이크로 범프 도금에 미치는 전해조건의 영향 (Effects of Electroplating Condition on Micro Bump of Multi-Layer Build-Up PCB)

  • 서민혜;홍현선;정운석
    • 한국재료학회지
    • /
    • 제18권3호
    • /
    • pp.117-122
    • /
    • 2008

  • Micro-sized bumps on a multi-layered build-up PCB were fabricated by pulse-reverse copper electroplating. The values of the current density and brightener content for the electroplating were optimized for suitable performance with maximum efficiency. The micro-bumps thus electroplated were characterized using a range of analytical tools that included an optical microscope, a scanning electron microscope, an atomic force microscope and a hydraulic bulge tester. The optical microscope and scanning electron microscope analyses results showed that the uniformity of the electroplating was viable in the current density range of $2-4\;A/dm^2$; however, the uniformity was slightly degraded as the current density increased. To study the effect of the brightener concentration, the concentration was varied from zero to 1.2 ml/L. The optimum concentration for micro-bump electroplating was found to be 0.6 ml/L based on an examination of the electroplating properties, including the roughness, yield strength and grain size.

  • https://doi.org/10.3740/MRSK.2008.18.3.117 인용 PDF KSCI