• 한국의류산업학회지
• /
• 제15권6호
• /
• pp.1000-1009
• /
• 2013

Well-fitting riding breeches provide a comfortable ride. Horse-riding breeches should fit the lower body with patches located on the inside of hip and knees to prevent tears and slips. This study provides information about the fit of women's breeches using 3D human body scan data wearing commercially available two breeches according to posture. To get information about breeches fit, we measured the angle of waist line, the length, and the area of the breeches fit on four 20's women. This research showed the problem which was down for waist back line in the case of the horseback riding pose. The back waistline of the riding breeches should be raised compared to the front waistline; subsequently, an increased waistline angle results in less back waistline decrease. The breeches have plenty of length from back waist to crotch so the breech fit can be improved. The thigh circumference increased when riding in the front; therefore, good elasticity of the weft direction of the fabric is recommended. The length increase and the peripheral increase of the front knee significantly increased the surface area of the knee; consequently, knee patch material should be a two-way elastic fabric in all directions to enhance comfort according to riding motion.

• 천문학회보
• /
• 제43권2호
• /
• pp.46.1-46.1
• /
• 2018

The Fast Imaging Solar Spectrograph (FISS) on the Goode Solar Telescope (GST) at Big Bear Solar Observatory is the imaging Echelle spectrograph developed by the Solar Astronomy Group of Seoul National University and the Solar and Space Weather Group of Korea Astronomy and Space Science Institute. The instrument takes spectral data from a region on the Sun in two spectral bands simultaneously. The imaging is done by the organization of intensity data obtained from the fast raster scan of the slit over the field of view. Since the scan repeats many times, the whole set of data can be used to construct the movies of monochromatic intensity at arbitrary wavelengths within the spectral bands, and those of line-of-sight velocity inferred from different spectral lines. So far there are two standard observing configurations: one recording the $H{\alpha}$ line and the Ca II 8542 line simultaneously, and the other recording the Na I D2 line and Fe I 5435 line simultaneously. We have developed the procedures to produce the standard data for each observing configuration. The procedures include the spatial alignment, the correction of spectral shift of instrumental origin, and the lambdameter measurement of the line wavelength. The standard data include the movie of continuum intensity, the movies of intensity and velocity inferred from a chromospheric spectral line, the movies of intensity and velocity inferred from a photospheric line. The processed standard data will be freely available online (fiss.snu.ac.kr) to be used for research and public outreach. Moreover, the IDL procedures will be provided on request as well so that each researcher can adapt the programs for their own research.

• 비파괴검사학회지
• /
• 제20권6호
• /
• pp.538-544
• /
• 2000

강구조물의 내부를 영상화 하여 비파괴 평가를 할 수 있는 위상배열 초음파 탐상 시스템을 의료용 영상진단기를 개조함으로 개발하였다. 선택된 의료용 시스템은 64개의 독립된 송수신채널로 이루어져있으며 최고 128개의 배열초음파 탐촉자를 구동하여 초음파영상을 획득할 수 있도록 되어있다. 개조를 위해 주되게 고려된 사항은 속도의 변화로 인한 시스템의 개조와 강구조물에 적합한 탐촉자의 제작 그리고 비파괴 탐상에서 필요한 A-scan 신호를 획득하는 것이었다. 강구조물에 적합한 배열탐촉자를 설계하고 제작하기위해 경계회절파모델(Boundary Diffraction Wave Model)을 이용하여 초음파의 방사되는 음장을 시뮬레이션 하였다. 그리고 A-scan신호를 획득하기위한 장치를 제작하여 주어진 영상에서 선택된 주사선(scan line)의 RF신호를 획득하도록 하였다. 또한 강구조물에서 적절하게 송수신집속이 될 수 있도록 지연시간을 조절하였다. 개발된 시스템과 제작된 배열 탐촉자의 성능평가를 위해 인위결함 시험편에서 실험한 결과, 시험편의 내부의 영상과 선택한 주사선에 대한 A-scan신호를 실시간으로 획득할 수 있었다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.179-182
• /
• 2007

In this study, we proposed a way to detect trees using virtual grid and to discriminate vertical wall points from building tops based on effective segmentation of LIDAR point cloud utilizing scan line characteristics. Trees were detected by their surface roughness value calculated based on virtual grid and vertical building wall points were discriminated from building tops with one dimensional filtering of scan line during segmenting point cloud. In results, we could distinguish trees from buildings and bind virtical wall points to prevent them from faltly acting on point segmentation process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.48-51
• /
• 1997

This paper presents the algorithm of FIC inspection in chip mounter. When device is mounted on the PCB, it is impossible to get zero defects since there are many problems which can not be predicted. Of these problems, devices with bent corner leads due to mis-handling and which are not placed at a given point measured along the axis are principal problem in SMT(Surface Mounting Technology). In this paper, we proposed a new algorithm based on the Radon transform which uses a projection to inspect the FIC(Flat Integrated Circuit) device and compared this method with other algorithms. We measured the position error and applied this algorithm to our image processing board which is characterized by line scan camera. We compared speed and accuracy in our board.

• 한국의학물리학회지:의학물리
• /
• 제28권3호
• /
• pp.129-133
• /
• 2017

The machine log files recorded by a scanning control unit in proton beam therapy system have been studied to be used as a quality assurance method of scanning beam deliveries. The accuracy of the data in the log files have been evaluated with a standard calibration beam scan pattern. The proton beam scan pattern has been delivered on a gafchromic film located at the isocenter plane of the proton beam treatment nozzle and found to agree within ${\pm}1.0mm$. The machine data accumulated for the scanning beam proton therapy of five different cases have been analyzed using a statistical method to estimate any systematic error in the data. The high-precision scanning beam log files in line scanning proton therapy system have been validated to be used for off-line scanning beam monitoring and thus as a patient-specific quality assurance method. The use of the machine log files for patient-specific quality assurance would simplify the quality assurance procedure with accurate scanning beam data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.788-792
• /
• 2004

In this study, the performance of the DPRMs is evaluated and the measurement precision for the pile driving is presented. The DPRMs is a visual-measurement system for the pile rebound and the penetration movement using a high speed line-scan camera. But the measurement errors of the DPRMs are caused by the strong impact for the pile driving. Therefore, the DPRMs should guarantee its measurement values for the pile driving. For this reason, the performance of the DPRMs by the vibration signal analysis is studied. It is found from this study that the measurement values of the DPRMs are reliable.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.231-234
• /
• 2003

This paper describes the structure, operation, image processing, and decision making techniques of a color machine vision system designed for the automatic sorting of soybeans. The system consists of feeder, conveyor belt, line-scan camera, lights. ejector, and a PC Unlike manufactured goods, agricultural products including soybeans have quite uneven features. The criteria for sorting good and bad beans also vary depending on inspectors. We tackle these problem by letting the system learn the inspecting parameters from good samples selected manually by a machine user before running the system for sorting. Real-time processing has another importance In the design. Four parallel DSPs are employed to increase the processing speed. When the designed system was tested with real soybeans and the result was successful.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.652-655
• /
• 2004

The geometry of satellite image captured by linear pushbroom scanner is different from that of frame camera image. Since the exterior orientation parameters for satellite image will vary scan line by scan line, the epipolar geometry of satellite image differs from that of frame camera image. As we know, 2D affine orientation for the epipolar image of linear pushbroom scanners system are well-established by using the collinearity equation (Testsu Ono, 1999). Also, another epipolar geometry of linear pushbroom scanner system is recently established by Habib(2002). He reported that the epipolar geometry of linear push broom satellite image is realized by parallel projection based on 2D affine models. Here, in this paper, we compared the Ono's method with Habib's method. In addition, we proposed a method that generates epipolar resampled images. For the experiment, IKONOS stereo images were used in generating epipolar images.

• ETRI Journal
• /
• 제25권5호
• /
• pp.288-296
• /
• 2003

In this study, we present a 260k color TFT LCD driver chip set that consumes only 5 mW in the module, which has exceptionally low power consumption. To reduce power consumption, we used many power-lowering schemes in the logic and analog design. A driver IC for LCDs has a built-in graphic SRAM. Besides write and read operations, the graphic SRAM has a scan operation that is similar to the read operation of one row-line, which is displayed on one line in an LCD panel. Currently, the embedded graphic memory is implemented by an 8-transistor leaf cell and a 6-transistor leaf cell. We propose an efficient scan method for a 6-transistor embedded graphic memory that is greatly improved over previous methods. The proposed method is implemented in a 0.22 ${\mu}m$ process. We demonstrate the efficacy of the proposed method by measuring and comparing the current consumption of chips with and without our proposed scheme.