• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.99-102
• /
• 2012

An image scaler is a IP used in a image processing block of display devices to adjust image size. Proposed image scaler adopts line memories instead of a conventional method using a frame memory. This method reduced hardware resources and enhanced data precision by using shift operations that number is multiplied by $2^m$ and divided again at final stage for scaling. Also image scaler increased efficiency of IP by using serial divider to calculate parameters by itself. Parameters used in image scaling is automatically produced by it. Suggested methods are designed by Verilog HDL and implemented with Xilinx Vertex-4 XC4LX80 and ASIC using TSMC 0.18um process.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.534-538
• /
• 2003

Final disposal of radioactive waste generated from Nuclear Power Plant (NPP) requires the detailed knowledge of the natures and quantities of radionuclides in waste package. Many of these radionuclides are difficult to measure and expensive to assay. Thus it is suggested to the Indirect method by which the concentrations of DTM (Difficult-to-Measure) nuclide is decided using the relation of concentrations (Scaling Factor) between Key (Easy-to-Measure) nuclide and DTM nuclide with measured concentrations of Key nuclide. In general, scaling factor is determined by using of log mean average (LMA) and regression. These methods are adequate to apply most corrosion product nuclides. But in case of fission product nuclides and some corrosion product nuclides, the predicted values aren't well matched with the original values. In this study, the models using artificial neural network (ANN) for C-14 and Sr-90 are compared with those using LMA and regression. The assessment of models is executed in the two parts divided by a training part and a validation part. For all of two nuclides in the training part, the predicted values using ANN are well matched with the measured values compared with those using LMA and regression. In the validation part, the accuracy of the predicted values using ANN is better than that using LMA and is similar to or better than that using regression. It is concluded that the predicted values using ANN model are better than those using conventional model in some nuclides and ANN model can be used as the complement of LMA and regression model.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.1
• /
• pp.119-127
• /
• 2015

Objectives: The purpose of the study is to investigate the relationship between dental caries and oral health behaviors in middle and high school students by web-based survey of the ninth(2013) Korean youth risk behavior. Methods: The subjects were 75,149 students from 400 middle schools and 400 high schools. Finally, the survey participation rate was 96.4%(72,435 students from 799 schools) by complex sample design. The questionnaire consisted of general characteristics of the subjects, oral health behaviors, and oral health status. General characteristics included gender, types of schools, economic condition, and residential types. Oral health behaviors included subjective oral health condition, frequency of tooth brushing, tooth brushing after meal within recent 7 days, sealant within 12 months, fluoride application within 12 months, scaling within 12 months, and oral health education experience within 12 months. Oral health condition included dental caries incidence within 12 months. Results: Oral health behavior influenced on dental caries in the middle and high school students in Korea. This study showed the relationship between the sociodemographic characteristics, tooth brushing frequency, sealant experience, dental caries and halitosis experience, and scaling within 12 months. Scaling is the best prevention method for dental caries and halitosis in the students. Conclusions: The study showed the necessity for practical oral health education and the effect of fluoride application for dental caries prevention.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.3
• /
• pp.387-393
• /
• 2013

Objectives : This study was carried out to investigate stepwise regression analysis on cervical abrasion & general characteristics, subjective oral health perception, habit related to oral health, and oral symptom. Methods : The study subjects were 2,158 workers in 23 industrial work places located in Gumi-si, Gyeongsangbuk-do Province from June 1 to July 1, 2012. As a result, the following conclusions were obtained. Results : 1. The cervical abrasion rate was high in men and older age group. 2. The cervical abrasion rate was high in a case of having not received scaling for the past one year. 3. The cervical abrasion rate was high in frequent tooth brushing. 4. The cervical abrasion rate was high in group having no bleeding in tooth and the gum. 5. The cervical abrasion rate was high in group having the cold symptom in teeth. 6. Excluding gum pain and bleeding, factors affecting tooth abrasion were gender, age, scaling over the past year, frequency of brushing a day and tooth sensitivity when cold food was ingested. 7. Gender and tooth sensitivity turned out to have negative(-) effect. age, scaling over the past year and frequency of brushing a day turned out to have positive(+) effect. Conclusions : Through this study, the best prevention method of cervical abrason is effective tooth brushing education and regular dental check up.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.529-532
• /
• 2008

Domestic area of most be happened chloride deicer damage. Because daily mean temperature is below 0$^{\circ}C$ from the area of domestic most. Use of deicing chemicals has been and will continue to be a major part of highway snow and ice control methods. Chloride-containing chemicals such as calcium chloride or rock salt are main deicers for the road. Extensive use of chloride deicers is, however, not only the source of substantial cost penalties due to their corrosive action and ability to deterioration roadway surface materials but also the source of environmental damages. Particularly, it has been recognized that chlorides present in deicing agents can significantly increase concrete surface scaling. In severe cases, scaling can result in dislodgement of coarse aggregate. This research estimates that pH and test of specific pollutants, dynamic modulus of elasticity for freeze-thaw test of concrete were higher than those NaCl, $CaCl_2$, and NaCl+$CaCl_2$(7:3, w/w), also weight losses for scaling test of concrete were much lower than those of NaCl, $CaCl_2$, and NaCl+$CaCl_2$(7:3, w/w).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.561-564
• /
• 2008

Concrete scaling is the progressive surface deterioration of susceptible subjected to freeze-thaw cycling in the presence of moisture. Particularly, it has been recognized that chlorides present in deicing agents can significantly increase concrete surface scaling. Domestic area of most be happened chloride deicer damage. Because daily mean temperature is below 0$^{\circ}C$ from the area of domestic most. Use of deicing chemicals has been and will continue to be a major part of highway snow and ice control methods. Chloride-containing chemicals such as calcium chloride or rock salt are main deicers for the road. Extensive use of chloride deicers is, however, not only the source of substantial cost penalties due to their corrosive action and ability to deterioration roadway surface materials but also the source of environmental damages. In this study, Use of (40, 27, 21MPa) pavement concrete analyze freeze-thaw test and scaling on the chlorides present.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.963-972
• /
• 2002

An 8192-point pipelined FFT/IFFT processor core is designed, which can be used in multi-carrier modulation systems such as DUf-based VDSL modem and OFDM-based DVB system. In order to improve the signal-to-quantization-noise ratio (SQNR) of FFT/IFFT results, two-step convergent block floating-point (TS_CBFP) scaling is employed. Since the proposed TS_CBFP scaling does not require additional buffer memory, it reduces memory as much as about 80% when compared with conventional CBFP methods, resulting in area-and power-efficient implementation. The SQNR of about 60-㏈ is achieved with 10-bit input, 14-bit internal data and twiddle factors, and 16-bit output. The core synthesized using 0.25-$\mu\textrm{m}$ CMOS library has about 76,300 gates, 390K bits RAM, and twiddle factor ROM of 39K bits. Simulation results show that it can safely operate up to 50-㎒ clock frequency at 2.5-V supply, resulting that a 8192-point FFT/IFFT can be computed every 164-${\mu}\textrm{s}$. It was verified by Xilinx FPGA implementation.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.9-17
• /
• 2016

Maximum power point tracking (MPPT) is necessary for photovoltaic (PV) power system application to extract the maximum possible power under changing irradiation and temperature conditions. The β-parameter-based method has many advantages over conventional MPPT methods; such advantages include fast tracking speed in the transient stage, small oscillations in the steady state, and moderate implementation complexity. However, a problem in the implementation of the conventional beta method is the choice of an appropriate scaling factor N, which greatly affects both the steady-state and transient performance. Therefore, this paper proposes a modified β-parameter-based method, and the determination of the N is discussed in detail. The study shows that the choice of the scaling factor N is determined by the changes of the value of β during changes in irradiation or temperature. The proposed method can respond accurately and quickly during changes in irradiation or temperature. To verify the proposed method, a photovoltaic power system with MPPT function was built in Matlab/Simulink, and an experimental prototype was constructed with a solar array emulator and dSPACE. Simulation and experimental results are illustrated to show the advantages of the improved β-parameter-based method with the optimized scaling factor.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.63-72
• /
• 2016

PURPOSES : The use of roller-compacted concrete pavement (RCCP) is an environmentally friendly method of construction that utilizes the aggregate interlock effect by means of a hydration reaction and roller compacting, demonstrating a superb structural performance with a relatively small unit water content and unit cement content. However, even if an excellent structural performance was secured through a previous study, the verification research on the environmental load and long-term durability was conducted under unsatisfactory conditions. In order to secure longterm durability, the construction of an appropriate internal air-void structure is required. In this study, a method of improving the long-term durability of RCCP will be suggested by analyzing the internal air-void structure and relevant durability of roller-compacted concrete. METHODS : The method of improving the long-term durability involves measurements of the air content, air voids, and air-spacing factor in RCCP that experiences a change in terms of the kind of air-entraining agent and chemical admixture proportions. This test should be conducted on the basis of test criteria such as ASTM C 457, 672, and KS F 2456. RESULTS : Freezing, thawing, and scaling resistance tests of roller compacted concrete without a chemical admixture showed that it was weak. However, as a result of conducting air entraining (AE) with an AE agent, a large amount of air was distributed with a range of 2~3%, and an air void spacing factor ranging from 200 to $300{\mu}m$ (close to $250{\mu}m$) coming from PCA was secured. Accordingly, the freezing and thawing resistance was improved, with a relative dynamic elastic modulus of more than 80%, and the scaling resistance was improved under the appropriate AE agent content rate. CONCLUSIONS : The long-term durability of RCCP has a direct relationship with the air-void spacing factor, and it can be secured only by ensuring the air void spacing factor through air entraining with the inclusion of an AE agent.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.2
• /
• pp.265-275
• /
• 2019

Objectives: The aim of this study was to investigate trends of oral health behaviors in Korean adolescents. Methods: From the 2005 to 2017 Korea Youth Risk Behavior web-based Survey (KYRBS) Secondary Data (study to 748,461). Independent variables were the year, gender, grade, and living area. Dependent variables were the rate of tooth-brushing after lunch, scaling, use of sealant, and oral health education within 1 year. Chi-squire tests were used to estimate the rate of oral health behaviors and trends. In addition, multiple logistic regression analysis was used to estimate the association between socio-economic characteristics and oral health behaviors. The analyses were conducted using IBM SPSS statistics 21 (version 21.0, IBM Corporation, New York, NY, USA). Results: The rate of tooth-brushing after lunch and use of sealant have significantly increased every year. Oral health behaviors were significantly associated with socio-economic characteristics. The rate of oral health education was higher among males than females, which was in contrast to other oral health behaviors. The scores for tooth-brushing after lunch, use of sealant, and scaling in females were 2.33 (95% CI; 2.27-2.40), 1.31 (95% CI; 1.29-1.33), and 1.20 (95% CI; 1.18-1.22), which were higher than those in males. The score for use of sealant in the highest household economy group was 1.13 (95% CI; 1.10-1.17), which was higher than the lowest economy group. Conclusions: We found positive trends of oral health behaviors in Korean adolescents.