• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.162-167
• /
• 2005

As the properties of porous materials during the drying process relate to the atomistic defects of heterogeneous materials such as dislocation, grain, grain boundary, pore, etc., the knowledge of nano-scale analysis is needed in order to accurately analyze the drying process for porous materials. In this study, the atomic behavior of porous materials Is statically predicted by using the molecular dynamics simulation and the nano-scale material properties are computed. The elastic modulus, thermal expansion coefficient, and volumetric heat capacity numerically found from the molecular dynamics simulation are compared with those of experiment and theory and proved the accuracy.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.173-178
• /
• 2005

The tile construction methods for existing have been used materials within limit which adhesion by wet method in masonry wall and concrete structure. These existing adhesive tech can caused many problems in construction of large and reform tile, after that it can be happened loose scale, peel off, falling off tile by heat and vibration or impact. In according to, this study is to test tile for bond stability, adhesive property by impact, vibration. low property by heat and then, we have the results as below; (1) The tile adhesive stability can be effected as adhesive area between bond agent and tile, adhesive area can more wide and press enough to ensure property. (2) Existing adhesive strength and standard relative tile construction is limited to adjust performance tile on the concrete and masonry wall. In summary, It is necessary to establish standard of performance and test method to ensure tile adhesive salability in dry wall.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.3
• /
• pp.560-566
• /
• 2013

In this research we extracted water-soluble collagen peptide from flatfish skin and compared it with commercially available collagen peptide extracted from Tilapia scale currently placed on the market in the aspect of physiochemical property. The physical property and nutritional components of FSCP appeared almost similarly to those of TSCP, and also in calorie, FSCP marking 3.82 Kcal showed no differences from TSCP marking 3.84 Kcal. As for forming amino acids, in aspartic acid, serine, histidine, tyrosine, methionine, FSCP had higher content than TSCP, but in OH-proline, proline and alanine FSCP had lower content than TSCP. Especially the content of essential amino acids of FSCP marked 22.74% with a higher content compared with 13.64% of TSCP. In the distribution of molecular weight FSCP with 1,000 Da showed comparatively low compared with TSCP, and in emulsion property and stability FSCP and TSCP showed similar excellent trend.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.295-298
• /
• 2005

This paper is concerned with the precision material property measurement of a micro metal thin foil that is used in MEMS technology. Since these MEMS components require great precision and accuracy, evaluation of reliability such as the lift cycle endurance test, impact test, and residual stress test is necessary for these components. However, in practice, real reliability tests are not easy to perform due to consideration of various factors. Rather than actual testing, it would be much easier to evaluate the reliability of components by the analytical approach. Although the analytical method is utilized by software tools, it is obviously necessary to acquire fundamental properties of materials through real test methods. In this paper, the oriented mechanical properties of aluminum thin foil are measured by nano scale material property measurement system.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.18 no.2
• /
• pp.77-105
• /
• 2014

Medical imaging techniques have evolved to expand our ability to visualize new contrast information of electrical, optical, and mechanical properties of tissues in the human body using noninvasive measurement methods. In particular, electrical tissue property imaging techniques have received considerable attention for the last few decades since electrical properties of biological tissues and organs change with their physiological functions and pathological states. We can express the electrical tissue properties as the frequency-dependent admittivity, which can be measured in a macroscopic scale by assessing the relation between the time-harmonic electric field and current density. The main issue is to reconstruct spectroscopic admittivity images from 10 Hz to 1 MHz, for example, with reasonably high spatial and temporal resolutions. It requires a solution of a nonlinear inverse problem involving Maxwell's equations. To solve the inverse problem with practical significance, we need deep knowledge on its mathematical formulation of underlying physical phenomena, implementation of image reconstruction algorithms, and practical limitations associated with the measurement sensitivity, specificity, noise, and data acquisition time. This paper discusses a number of issues in electrical tissue property imaging modalities and their future directions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.3
• /
• pp.12-24
• /
• 1997

One argument of this study is that the policy to handle and landscape of cultural and historical property had to do with people's visual preferences. This study seeks to investigate people's visual preferences toward the landscape of cultural /historical property, specifically dealing with 'Namdaemun', which is the first class cultural property of Korea. People's visual preference was specifically examined into the four specific concepts : 'visual identity','harmony','beauty of the target property', and 'overall beauty'. Two objective variables, such as, 'distance' between the viewer and the cultural property, and 'height' of background buildings were considered possible predictors of the four visual preference variables. Photos of 'Namdaemun' were taken at three different directions and at three different distances. The photographed images of 'Namdaemun' were transferred ito the digitalized graphic images, where the height of background buildings was artificially changed and simulated. The simulated visual images were taken into the slides again. A total of 59 students of the Department of Landscape architecture at Seoul City University were sampled as subjects. A series of 17 slides were shown to the subjects four times. The subjects were asked to check their preference ratings concerning the four concepts on a 7-point Likert scale. The results found in this study were as follows : 1) In the results of ANOVA, it was clear that people visually preferred the view where the height of background buildings were lower than 15 floors to the view of more than 15 floors . 2) From the results of the path analysis, it was found that 'harmony','visual identity' and 'beauty of the target property' were direct predictors of 'the overall beauty'. The 'height ' of background buildings and the viewer's 'distance' were not found to be direct predictors, however, they demonstrated their effects on 'the overall beauty' through the other variable, which were direct predictors of 'the overall beauty'. In sum, the longer the distance and the higher the background buildings, the lower people's preference with the 'overall beauty'. These indirect paths, in turn, also explain why and how the 'height' of background buildings and the viewer's 'distance' negatively influence the 'overall beauty'. An implication from the these results is that when the height of background buildings were not controllable, there would be some other strategies for improving people's visual preference toward the historical /cultural view. To increase 'visual identity' of the cultural property, for example, changing colors of the cultural property or increasing the lighting level, etc., would be one strategy, since the increased 'visual identity' will, in turn, increase 'the overall beauty'.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.288-288
• /
• 2006

Natural rubbers (NR) reinforced by multi-wall carbon nanotubes (MWCNT) was found to show extraordinary improvement of mechanical property. We speculated that this was owing to the interfacial phase that surrounded CNT and investigated about the phase by atomic force microscopy (AFM). Using force modulation mode and force-distance curve analyses, we succeeded in obtaining the information of its nanometer-scale rheological property. We found that was actually surrounded by the interfacial phase, that had softer modulus than NR matrix.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1291-1299
• /
• 2003

In order to design the better brassiere in terms of appearance and functions, various parameters of the materials should be considered; in this study, fatigue properties and subjective sensation of wing materials and its relation to the preference for a brassiere was investigated. After the survey of commercially available products, five elastic fabrics such as cotton, Modal, polyester, nylon, and Tactel, all of which contain 10% polyurethane, were chosen as specimens. Fabric growth were determined to evaluate fatigue properties. Qmax was determined to evaluate the warm-cool feeling. For the sensory test, semantic differential scale which contains 15 adjectives were developed. Fatigue properties were very similar at the 20% elongation irrespective of the duration of tension, but at 40% and 100% elongation, man made fabric showed less growth than cellulose fabrics. The factor analysis showed four factors such as sense of warmth, smoothness, weight and elasticity. Preference of the specimens was ranked in the order of Tactel>Modal>cotton>nylon>polyester.

• International Journal of Concrete Structures and Materials
• /
• v.5 no.1
• /
• pp.3-10
• /
• 2011

Theoretical models for prediction of the mechanical properties of cement mortar are developed based on the morphology and interactions of cement hydration products, capillary pores and microcracks. The models account for intermolecular interactions involving the nano-scale calcium silicate hydrate (C-S-H) constituents of hydration products, and consider the effects of capillary pores as well as the microcracks within the hydrated cement paste and at the interfacial transition zone (ITZ). Cement mortar was modeled as a three-phase material composed of hydrated cement paste, fine aggregates and ITZ. The Hashin's bound model was used to predict the elastic modulus of mortar as a three-phase composite. Theoretical evaluation of fracture toughness indicated that the frictional pullout of fine aggregates makes major contribution to the fracture energy of cement mortar. Linear fracture mechanics principles were used to model the tensile strength of mortar. The predictions of theoretical models compared reasonably with empirical values.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.193-196
• /
• 2014

Experimantal evaluation of an energy storage device with high rotational speed to store regenerative energy which might be generated during the braking period of the trains is presented. The proposed ESS is small scale model and has 5kW output power, high rotational speed. In general railway trains generate regenerative energy for 10-20 sec when the train brakes and also high traction energy is needed for very short moment (10 sec) when the train increases the traction force. Considering such characteristics of the railway system energy storage device for the railway should have very fast response property. Among the various energy storage devices flywheel energy storage system has the fastest response property, which means that flywheel ESS is the most suitable for the railway system.