• Journal of the Korean Ceramic Society
• /
• v.42 no.8 s.279
• /
• pp.582-587
• /
• 2005

AlN-BN ceramic composites were fabricated and their mechanical properties were investigated. The relative density of hot-pressed composites decreased with increasing BN content, but over $99\%$ could be obtained with 30 $vol\%$ BN in AlN. YAG was formed in the composites and monolithic AlN as a second phase by the reaction between $Y_2O_3$, added as sintering aid, and $Al_2O_3$. As expected, Vickers hardness and Young's modulus decreased with increasing BN content. The three-point flexural strength also showed similar behavior decreasing from 500 MPa of monolith down to 250 MPa by the addition 30 $vol\%$ BN. However, interestingly, the standard deviation of the strength values decreased significantly as BN was added to AlN. As a result, the Weibull modulus of the AlN-30 $vol\% BN composite was 21.3, which was extremely high. Fractography and crack path studies revealed that BN platelets induced grain pull-out and crack bridging in a bigger scale during crack propagation. Consequently, fracture toughness increased as more BN was added, reaching 4.5 $MPa\sqrt{m}$ at 40 $vol\%$ BN.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.345-352
• /
• 2005

Recently the large shipping companies are reducing a port of call to cut down on expenses related to the large size of ship for economy of scale. Due to this, it is necessary to work out a strategy to overcome the severe competition among ports. According to the importance of port marketing, there were many studies on port marketing. But previous studies for domestic port marketing are considered more importantly Products, Price and Promotion than Place of the 4Ps of marketing mix strategy. But it has to preferentially consider the place strategy in Busan Port because the best advantage is geographical position. So this paper shows the strategic plan of Place Marketing.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.121-128
• /
• 2016

Purpose: The vacuum glazing should constantly retain the gap in vacuum state to maintain high thermal performance. To do so, pillars are used to prevent the glazing from clinging to each other by the atmospheric pressure and therefore surface of the vacuum glazing is consistently affected by residual stress. The vacuum glazing could be applied to curtain wall systems at spandrel area to fulfill a rigorous domestic standard on U-value of the external wall. However, this can lead to high glazing temperature increase by heat concentration at a back panel and finally thermal stress breakage. This study experimentally determined weakness of the vacuum glazing systems on the thermal stress breakage and investigated effect of the residual stress. Method: The experiment first built two scale-down mock-up facilities that replicate the spandrel area in curtain wall, and then installed single low-e glass and vacuum glazing respectively. The two mock-up facilities were exposed to outside to induce the thermal stress breakage. Result: The experiment showed that the temperature occurred the thermal stress breakage was $114.4^{\circ}C$ for the single low-e glass and $118.9^{\circ}C$ for the vacuum glazing respectively. The result also showed the vacuum glazing reached the critical point earlier than the single low-e glass, which means that the vacuum glazing has high potential to occur the thermal shock breakage. In addition, the small temperature difference between two glazing indicates that the residual stress scarcely affects breakage of the vacuum glazing.

• KSBB Journal
• /
• v.11 no.4
• /
• pp.405-410
• /
• 1996

This paper discussed the dispersion effect according to the geometrical variation of an internal-loop spparatus by the method of pulse injection of a tracer. The Bodenstein number, which is the dimensionless group characterizing the effect of dispersion, was decreased with increasing the superficial gas velocity in the 50L and the 500L apparatus. But, in the 5L apparatus, the Bodenstein number was increased with increasing the superficial gas velocity in the range of 0 to 2cm/sec but above that range the rate of increase was dropped down to give a constant value because of the phenomenon of gas disengagement. The principle of similarity based on dimensional analysis was applied to design a pilot scale internal-loop apparatus. The effect of dispersion was examined in three different internal-loop apparatus to give the following correlation with major geometric and fluid dynamic properties as variables. B0=4.4014ReG0.117 ReL-0.0065(Hr/Dr)0.76(Dd/Dr)-0.76

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.157-157
• /
• 2008

As the minimum feature size of semiconductor devices scales down to nano-scale regime, ultra shallow junction is highly necessary to suppress short channel effect. At the same time, Ni-silicide has attracted a lot of attention because silicide can improve device performance by reducing the parasitic resistance of source/drain region. Recently, further improvement of device performance by reducing silicide to source/drain region or tuning the work function of silicide closer to the band edge has been studied extensively. Rare earth elements, such as Er and Yb, and Pd or Pt elements are interesting for n-type and p-type devices, respectively, because work function of those materials is closer to the conduction and valance band, respectively. In this paper, we increased the work function between Ni-silicide and source/drain by using Pd stacked structure (Pd/Ni/TiN) for high performance PMOSFET. We demonstrated that it is possible to control the barrier height of Ni-silicide by adjusting the thickness of Pd layer. Therefore, the Ni-silicide using the Pd stacked structure could be applied for high performance PMOSFET.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.2
• /
• pp.83-90
• /
• 2009

The previous studies for dynamic behavior of spatial structure have been zoomed in on roof structure by numerical analytic method. But the roof structure of real spatial structures is supported by lower structure as column and wall. So, when earthquake is occurred, it is predicted that dynamic behavior of roof structure is affected by lower structure. Therefore, on this study, natural period characteristics of arch structures are analyzed according to section, length and the modulus of elasticity of brass column and polycarbonate column and additional mass of roof structure by the scale-down model of arch structure as the most simple structure of spatial structures. The changes of natural periods are generally alike. But, when Polycarbonate column is connected to roof structure, the change of natural period for change of section is relatively large. That means that change of section and section and length of column and additional mass of roof structure have less influence on change of stiffness because the modulus of elasticity of brass is relatively large.

• Physical Therapy Korea
• /
• v.19 no.1
• /
• pp.56-65
• /
• 2012

This study examines the effects of a rehabilitation program on quality of life (QOL), cardiopulmonary function and fatigue during radiotherapy for breast cancer patients. The program includes aerobic exercise, stretching and strengthening exercises. Sixty-five women participated in this study and they were asked to perform supervised exercises that last for 60 minutes five times a week for six weeks. The European organization for research and treatment of cancer-cancer (EORTC QLQ-C30) and the breast (EORTC QLQ-BR23), predicted maximal volume of oxygen consumption ($VO_{2max}$) and fatigue severity scale (FSS) were assessed before and after the rehabilitation program. The 60-minute program consisted of a 10-minute warm-up, 30-minute of aerobic exercises, and 15-minute of strengthening exercises, followed by a five-minute cool-down. Heart rates were monitored throughout the exercise class to ensure that patients were exercising at the target heart rate of 40~75% of the age-adjusted heart rate maximum. There were statistically significant differences in the changes of physical function and cancer related symptoms in the EORTC QLQ-C30 and EORTC QLQ-BR23 (p<.05). There was a statistically significant improvement in the predicted $VO_{2max}$ (p<.05), although there were no significant differences in the FSS (p>.05). The results of our study suggest that a supervised rehabilitation program may benefit the physical aspects and QOL of patients receiving radiotherapy for breast cancer.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.79.3-80
• /
• 2017

Molecular clouds are the sites of stellar birth. Turbulence is a natural phenomenon in molecular clouds, which largely determines the density and velocity fields. Additionally turbulent energy dissipation can affect the gas kinetic temperature via shocks. Turbulence thus controls the mode and tempo of star formation. However, despite its important role in star formation, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "Mapping turbulent properties of star-forming molecular clouds down to the sonic scale (PI: Jeong-Eun Lee)", we have been mapping two star-forming clouds, the Orion A and the ${\rho}$ Ophiuchus molecular clouds in 3 sets of lines (13CO 1-0/C18O 1-0, HCN 1-0/HCO+ 1-0, and CS 2-1/N2H+ 1-0) using the TRAO 14-m telescope. We apply a Principal Component Analysis (PCA), which is an useful tool to represent turbulent power spectrum. We will present the preliminary results of our TRAO KSP toward two regions: OMC 1-4 in the Orion A cloud, and L1688 in the ${\rho}$ Ophiuchus cloud.

• Journal of muscle and joint health
• /
• v.10 no.2
• /
• pp.188-202
• /
• 2003

The aim of study was to investigate the effects of 12 forms of Sun-style Tai-Chi for arthritis(TCA) on physical symptom(pain, tenderness, swelling fatigue, and blood pressure), physical function(balance, flexibility, grip strength) and social-psychological health status in osteoarthritis(OA) patients and rheumatoid arthritis(RA) patients. This study was done with one group pretest-posttest design. A total 21 arthritis patients(6 OA patient and 15 RA patient) participated in 60 minute session consisting of warm-up exercise 12-main movement including qigong, and cool-down exercise twice a week for 6weeks. Physiological and social-psychological variables were measured before and after TCA 12 form. The researcher who completed a Tai Chi workshop for exercise leaders in Australia and Seoul taught the Tai Chi movement step by step until the patient felt comfort enough to perform them correctly by themselves during the first 4 weeks. At the last 2 weeks, the subject perform 10-15set of these at a session with traditional music to help patients move in a slow tempo. TCA 12 forms program showed significant improvement in fatigue(p=0.039) of rheumatoid arthritis patient and pain(p=0.006), fatigue(p=0.013), tenderness(p=0.032), flexibility(rt arm up, p=0.014, If arm up, P=0.003), grip strength(rt hand, p=0.002, If hand, P=0.003) of osteoarthritis patients. With assessment by Arthritis Impact Measurement Scale 2 questionnaire(AIMS2), physical component(0.002) and social interaction(0.025) on osteoarthritis patients were significantly improved. Evaluation of the participants about TCA exercise noted that the exercise was fairly easy(23.6%), moderately difficult(57.1%), and fairly difficult(14.3%). Considering the result of this study, TCA exercise program was more effective in pain, tenderness, grip strength, flexibility, and physical and social interaction on osteoarthritis patients than rheumatoid arthritis patients. Tai-Chi for arthritis 12 form was an appropriate intensity exercise for osteoarthritis patients.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.551-561
• /
• 1998

This paper was studied to understand the characteristics of heat transfer coefficients and surface temperature distributions around a circular combustion chamber within the heat-intercept duct of kerosene fan heater. The experiment was carried out in the heat-intercept duct of kerosene fan heater attached to the blow-down-type subsonic wind tunnel with a test section of 240 mm * 240 mm * 1200 mm. The purpose of this paper was to obtain the basic data related with normal combustion for new design from conventional kerosene fan heater, and to investigate the effect of surface temperature, local and mean heat transfer coefficients versus flow-rate of convection axial fan according to the variations of heat release conditions from kerosene fan heater during normal combustion. Consequently it was found that (i) the revolution of convection axial fan during combustion had a smaller value than that of non-combustion because of the thermal resistance due to the high temperature in the heat-intercept duct, (ii) the pressure ratio P$_{2}$/P$_{1}$ had a comparatively constant value of 0.844 according to the revolution increase of turbo fan and the heating performance of kerosene fan heater had a range of 1,494 ~ 3,852 kcal/hr, (iii) the local heat transfer coefficient around a circular combustion chamber had a comparatively larger scale in the range of 315 deg. < .theta. < 45 deg. than that in the range of 90 deg. < .theta. < 270 deg. as a result of heat transfer difference between front and back of a circular combustion chamber, and (iv) the mean heat transfer coefficient around a circular combustion chamber increased linearly like a H$_{m}$=95.196Q+104.019 in condition of high heat release according to the increase of flow-rate of axial fan.n.