• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.682-683
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.141-142
• /
• 2012

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.38-38
• /
• 2001

The rainfall estimates give sufficiently accurate information to map areas which have received the minimum rainfall necessary for outbreaks of pests such as locusts, thus cutting down the cost of searching for likely outbreak sites. At the other end of the scale, satellite rainfall estimates can be used to give timely warnings of changes in river levels and the likelihood of floods in large river catchments.(omitted)

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.147-150
• /
• 2000

Bioprocess chromatography is probably the most widely used unit operation in biopharmaceutics manufacturing. To obtain a good quality product reproducibly, the chromatography process validation should be performed carefully. We developed a miniaturized automatic chromatography system, MiniValChrom, for column performance validation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.49-50
• /
• 2010

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.239-242
• /
• 2003

Scale down으로 인해 부족해진 overlay margin을 통해 충분히 확보해주고, 이와 동시에 attPSM(attenuated phase shift)의 사용으로 발생하는 side-lobe 현상을 억제하기 위한 방법으로 rule-based OPC(optical proximity correction)룰 사용하여 side-lobe만을 효과적으로 추출한 후, 그 자리에 scattering bar를 삽입하였다. 그리고 ORC(optical rule checking)를 통해 original layout과 aerial image의 EPEs(edge placement errors)를 검사하여 검증에 걸리는 시간을 감소시켰다.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.253-255
• /
• 2003

Flash memory는 device 특성상 peripheral circuit을 구성하는 transistor의 종류가 다양하고, 이에 따른 각 transistor의 동작 전압 영역이 넓다. 이에 따라 설계 초기의 전기적 특성 스펙 절정을 위해서는, silicon 상에서 소자의 scale down에 따른 전기적 특성을 선 검증하는 과정이 필수적이었으며, 이로 인해 설계 및 소자 개발의 기간을 단축하기 어려웠다. 본 연구에서는 TCAD tool을 사용하여 silicon상에서의 제작 공정을 거치지 않고, 효과적으로 model parameter를 생성할 수 있도록 하는 방법을 제안하여. 전기적 특성 스펙 결정과 설계 단계의 시간 지연을 감소할 수 있도록 한다.

• Journal of KSNVE
• /
• v.10 no.3
• /
• pp.423-429
• /
• 2000

This paper investigates the use of boundary element method(BEM) to analyze the insertion loss of a noise barrier. To begin with the validity of the BEm for the analysis of noise barrier insertion loss in checked by both Lam's theoretical method and the measurements in the anechoic chamber for the scale-down models. Through simulation it is shown that using 2D BEM model is sufficient to the analysis for the barrier with large ratio of length to height. By using 2D BEM model the insertion loses are predicted for the real noise barriers in several cases which are the case that they are built parallel on both roadsides the one that there are multiple sound sources and the one that there is a gap between a concrete structure and a barrier plate.

• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.212-216
• /
• 2000

Combustion phenomenon in scale-downed combustor is investigated. As the combustor volume decreases surface to volume ratio increases. for increased surface to volume ratio means increased heat loss and this increased heat loss affects reaction in combustion chamber. Plastic mini combustor is made. Stoichiometricaly premixed Hydrogen I air gas is used as fuel. Initial chamber pressure and chamber size are varied and the effects are evaluated. Peak pressure decreases with the decrease in chamber height. As initial chamber pressure decreases peak pressure decreases. And this change is more important than scale down effect till the chamber height of 1mm. With this result and further information following the experiments design parameter for micro engine can be established.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.710-713
• /
• 2003

The wall charge is major factor to determine the discharge characteristics. The minimum sustain voltage related to the wall charge decay were investigated as a function of aging time in AC plasma display panel. For the long time scale, the wall charge decay time is dependent on the aging time. The inverse time scale of the wall charge decay has the maximum value at around 3 hours aging time and then fell down.